Question about Televison & Video

1 Answer

My DMR-EH80VEB IS COMPLETELY DEAD ,HAVE CHANGED EXTERNAL FUSE BUT STILL NO GOOD.

Posted by on

  • Grusha Dec 08, 2008

    Overnight my DMR-EH80VEB went completely dead. Checked the fuse but nothing. Anyone know where to start? Is there a fuse inside the unit?
    Francis

  • Cairoli Jan 01, 2009

    Same problem as Frances



    DVD went off overnight this week - dead - changed fuse - changed lead - nothing. Any suggestions other than the bin!

    Dave

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Hi, I have the same model PVR which stopped working in the same way, in answer to your question, yes there is an internal safety fuse located inside the case under the switch mode power supply cover, WARNING this cover protects against electrical shock, Ie there are full mains supply voltages under the cover so make sure that the power cable is completely disconnected before you remove the safety cover. if the fuse has blown make sure that you replace it with a quick blow compatible type.
Thi did not help in my case because a component had failed in the power supply board so I am still looking for a service manual, anyone know where I can buy one.
David Trueman

Posted on May 30, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My dmr-eh55s will no longer transfer from the hard drive to the DVD in the high speed mode. It will in low speed mode (real time).


It sounds like the DVD-RAM drive is about dead. Panasonic did not make them to be very durable.

Panasonic sells replacements at a high cost.

Replacement drives may work from used models including:
DMR-ES15
DMR-ES25
DMR-ES45
DMR-ES46

Jun 17, 2010 | Panasonic DMR-EH55 DVD Recorder/HDD...

2 Answers

Panasonic dvd video recorder dmr-e85h is dead


I had same problem. I replaced two bad capacitors on the power supply card. See http://vassfamily.net/projects/DMRE85H/dmre85h.html The capacitors I replaced were C1260 and C1261 slightly different from the one on "vassfamily.net". Everything works now for me...

Good luck.

Also for those interested, I found the "commands" listed on http://www.dxcc.com/dmr-e85h.htm useful when operating the DMR-e85h to correct problems.

Jul 26, 2009 | Panasonic DMR-E85H DVD Recorder

1 Answer

My dmr e85h display "hold" for 5 sec and turn off


The power supply board on the DMR-E85H has problems. The earlier boards suffered from leaking capacitors and the later boards from voltage regulator problems. If your machine is now dead, the fuse on the power supply board has also blown.Go to the following links for details and photos on how to fix: Replacing capacitors:http://www.fixya.com/support/t216825-dvd_recorder_frozen_please_wait_display Replacing the voltage regulator:http://www.rbjtech.net/electrical/e85/e85.htm#0 Hope this helps. My machine had the later ps board and the voltage regulator replacement worked perfectly.

May 21, 2009 | Panasonic DMR-E85H DVD Recorder

1 Answer

Removed and replaced internal fuse - unit is now dead


Hi

The chances are that you bridged the printed track with a splash of solder when you replaced the regulator. A short circuit like this will cause the fuse to blow. You can get replacement 20mm slow blow 2amp fuses quite easily. But before you fit a new one, pull the board out again and have a very careful look under a magnifying glass at your solder joints. Get a small stiff bristle brush and carefully brush across the joints in case there is a tiny ball of solder across two points. When you reassemble the unit, ensure that the ribbon connectors are central and fully pushed into the sockets. I'm sure you can recover your DMR E55 reasonably easily. Best wishes

Dec 21, 2008 | Panasonic DMR-E55 DVD Recorder

1 Answer

DMR-E85h now completely dead


The STRG6353 is a chunky integrated circuit used in the switch mode power supply (SMPS) circuit.
It is a " QUASI-RESONANT FLYBACK SWITCHING REGULATOR" used for the high frequency 300VDC switching.

Aug 07, 2008 | Panasonic DMR-E85H DVD Recorder

1 Answer

Problem


If the AC power source (outlet) is ok and the line cord and fuse are ok but the unit is completely dead, you may have a problem with the internal switching power supply.

Locate the switching power supply and see if there is a fuse on its circuit board.

Completely dead units are typically caused by a failure in the power supply section.

Please let me know if I can be of further assistance to you.

Good luck!

- Jim

Mar 06, 2008 | Sony SLV-D360P DVD Player/VCR

1 Answer

No Indication...Dead Unit?


Firstly, try plugging the unit into another mains socket just to make sure it's not the socket that's faulty, or try another appliance in the socket you are using. Next, make sure the fuse in the plug hasn't blown. If you don't have a fuse tester, you can try the fuse in another similar appliance to see if it works. If it has blown and your spare lead is the same, there will be an internal problem. Inside the unit is an in-line 2 amp fuse. If this has blown you almost certainly have a power board problem. Always switch the mains off before plugging in or removing the mains lead from the rear of the unit. Back EMF can damage the appliance if you don't do this.

Dec 26, 2007 | Panasonic DMR-E55 DVD Recorder

3 Answers

Panasonic DMR-ES10


std by light is on?means red light is on.If not than check fuse,vdr,and regulator ic in power unit.if fuse is open than change these component because fuse will blow if the regulator ic is faulty.

Dec 15, 2007 | Panasonic DMR-ES10 DVD Recorder

1 Answer

Power problem


yes it is worth repairing take it to a tech the problem is in the power supply,goodluck.

Mar 29, 2007 | Panasonic DMR-ES30VEBS

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

236 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

69795 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6370 Answers

yadayada
yadayada

Level 3 Expert

63801 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...