Question about Logitech Quickcam Chat Webcam

1 Answer

Logitech Quickcam Chat

I had installed it and the picture is very poor quality. When I talk to freinds the can't hardly see me. I am all fuzzy. Not clear picture at all. Help me please.

Posted by on

  • 1 more comment 
  • Anonymous Dec 11, 2008

    POOR PICTURE QUALITY ON THE RECEIVING END OF VIDEO CHAT. PICTURE FREEZES EVERY SO OFTEN AND THE PEOPLE ON THE OTHER END ARE NOT AS CLEAR AS i EXPECTED, ANY SUGGESTIONS?

  • reggiere Dec 12, 2008

    where do i find the resoiltion ajustment?

  • reggiere Dec 12, 2008

    where do i find theresoltion ajustment? is that the ing you turn n the cam to focus?? [this is reggiere] and yes i have the same problem.

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 31 Answers

Hi Thomas,
Have you tried adjusting your resolution? To maximize the quality of video/picture that your webcam can capture, Turn the resolution into 1.3megapixel. Adjusting the resolution is by clicking the arrow above the Video Option. 

Posted on Oct 25, 2008

  • delinquent_p
    delinquent_p Aug 07, 2012

    How to you adjust resolution? I've seen no option for that.

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

MY LOGITECH WEBCAM IS FUZZY,I CANT SEE IT


Did you install the drivers?

Give some more detailed information about your computer configuration, which win are you using?

Jun 21, 2010 | Logitech Quickcam Chat Webcam

1 Answer

I want to install web cam and chat with freinds


1st You download Webcam Driver. Driver Logitech QuickCam Pro After this install the Webcam driver in the system.
Installation of Webcam Driver
  • Go to the control panel
  • Click on the System Icon
  • Click on the Hardware Tab
  • Click on the Device Manager then
  • Select the Unknown Device or printer device where yellow Question Marks sign on it.
  • Right click on it and uninstall it.
  • After this go to the top of the device manager and click on scan for hardware changes.
  • Driver installation Wizard start.
  • Brows Your Driver from the Hard Disk and click on next.
  • Driver will be install.

May 01, 2010 | Logitech QuickCam Pro 4000 Webcam

1 Answer

Poor quality 'VID' chat


Check if the problem is in the transmssion speed particular the upload rate is important.
Check withe on of the DSLspeed test programs you can find on the web.

Mar 15, 2010 | Logitech QuickCam Pro 9000 Web Cam

1 Answer

Fuzzy and dark


What model camera do you have? Have you installed the latest device drivers for your operating system from logitechs website?
Is the picture quality the same on a different messenger ie: windows live/ yahoo? Try this and let me know.

May 07, 2009 | Logitech QuickCam Messenger Web Camera

1 Answer

Fuzzy Picture


This is the Logitech support site, there is a troubleshooting part (faq) and a driver download part.

http://www.logitech.com/index.cfm/support_downloads/&cl=au,en

May 03, 2009 | Logitech Quickcam Chat Webcam

1 Answer

Poor quality video transmission on new webcams


The camera lens can be focused by turing the lens from Left to Right. Sounds like this may be the problem. Hope this helps. Bud

Jan 04, 2009 | Logitech Webcam

2 Answers

Fuzzy picture on Quickcam chat by Logitech


I can tell you how to fix it :D the white part where the lens is turn it ontil clear my dad did it for me its soooo clear! This is when its dark...e6c1bca.jpg

Mar 22, 2008 | Logitech Quickcam Chat Webcam

1 Answer

Logitech web cam


Many factors can affect the image quality of your pictures. If you are experiencing blurry images, please try adjusting the focus ring located around the lens. This will allow you to focus the camera image on objects at different distances. Also, make sure there is good lighting. Improving the lighting conditions can improve the image quality considerably.
Connection Issues:
If the image quality is poor while transmitting video over the Internet using video enabled programs such as MSN Messenger, Yahoo! or AOL Instant Messenger, your connection speed to the Internet directly affects the image quality of the transmitted video. Corporate LAN, DSL/cable modem connections will result in the best image quality experience, while dial-up connections may result in choppy and overall poor quality because of the slower connection speed. Even broadband connections such as DSL/cable modem may experience choppy video at times because of Internet traffic or slow upload speeds. If the image appears clearly in the camera software, most likely your Internet connection may be responsible for the poor image quality in your video program.
Changing Display Adapter Settings:
If you are still experiencing a distorted, fuzzy or grainy image, you may need to change the settings for your display adapter. For optimal image quality, please make sure the video display adapter is set to display at least 16-bit high color or higher. To change the color palette please perform the following steps:
  1. Click on "Start," "Settings," and "Control Panel."
  2. Double-click on the Display icon.
  3. Click on the tab labeled Settings.
  4. In the dialog box labeled Color Palette, verify the video mode is set to 16-bit (high color) or 24-bit (true color).
  5. Also, check with the manufacturer of the video card for updated video drivers.
Low Light Boost:
If you cannot do anything to improve the lighting situation, some Logitech video cameras have an option for "Low Light Boost." If there is an option for "Low Light Boost," try enabling the "Low Light Boost" in the QuickCam software. To do this:
  1. Open the QuickCam software.
  2. At the bottom right hand corner of the camera image box, click on the arrow next to the QuickCam icon.
  3. Choose "Advanced Camera Settings".
  4. Under the Image Enhancement box, place a check mark in the "Low Light Boost" option.
  5. If that does not improve the image quality, try adjusting the other image settings, such as contrast, saturation brightness, gain and white balance.
  6. Click OK when your are done.

Feb 27, 2008 | Logitech Quickcam Chat Webcam

1 Answer

Shows Dark


Many factors can affect the image quality of your pictures. If you are experiencing blurry images, please try adjusting the focus ring located around the lens. This will allow you to focus the camera image on objects at different distances. Also, make sure there is good lighting. Improving the lighting conditions can improve the image quality considerably.
Connection Issues:
If the image quality is poor while transmitting video over the Internet using video enabled programs such as MSN Messenger, Yahoo! or AOL Instant Messenger, your connection speed to the Internet directly affects the image quality of the transmitted video. Corporate LAN, DSL/cable modem connections will result in the best image quality experience, while dial-up connections may result in choppy and overall poor quality because of the slower connection speed. Even broadband connections such as DSL/cable modem may experience choppy video at times because of Internet traffic or slow upload speeds. If the image appears clearly in the camera software, most likely your Internet connection may be responsible for the poor image quality in your video program.
Changing Display Adapter Settings:
If you are still experiencing a distorted, fuzzy or grainy image, you may need to change the settings for your display adapter. For optimal image quality, please make sure the video display adapter is set to display at least 16-bit high color or higher. To change the color palette please perform the following steps:
  1. Click on "Start," "Settings," and "Control Panel."
  2. Double-click on the Display icon.
  3. Click on the tab labeled Settings.
  4. In the dialog box labeled Color Palette, verify the video mode is set to 16-bit (high color) or 24-bit (true color).
  5. Also, check with the manufacturer of the video card for updated video drivers.
Low Light Boost:
If you cannot do anything to improve the lighting situation, some Logitech video cameras have an option for "Low Light Boost." If there is an option for "Low Light Boost," try enabling the "Low Light Boost" in the QuickCam software. To do this:
  1. Open the QuickCam software.
  2. At the bottom right hand corner of the camera image box, click on the arrow next to the QuickCam icon.
  3. Choose "Advanced Camera Settings".
  4. Under the Image Enhancement box, place a check mark in the "Low Light Boost" option.
  5. If that does not improve the image quality, try adjusting the other image settings, such as contrast, saturation brightness, gain and white balance.
  6. Click OK when your are done.

Jan 13, 2008 | Logitech Quickcam Chat Webcam

1 Answer

No sound+bad image quality


I would suggest uninstalling the software and trying you cam in a different usb port and installing the software again, but also check in the firewall allowed programmes for whatever IM programme you use. You can also have a faulty cam or faulty IM programme, so uninstall and reinstall the programme to illiminate it, and ensure you have a good connection as a slow connection causes problems along with running other memory and proccesor hungry programmes

Apr 29, 2007 | Logitech QuickCam Pro 5000 Webcam

Not finding what you are looking for?
Logitech Quickcam Chat Webcam Logo

Related Topics:

94 people viewed this question

Ask a Question

Usually answered in minutes!

Top Logitech Webcams Experts

gaucherre

Level 2 Expert

180 Answers

WTF Chuck.....
WTF Chuck.....

Level 3 Expert

378 Answers

Pieter Vleeshouwers

Level 3 Expert

1410 Answers

Are you a Logitech Webcam Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...