Question about Blaupunkt Car Audio & Video

1 Answer

Car radio error code

Radio says 'code error' on power up. Unable to enter our 4 digit code.
Please can you advise us on how to enter the code so as to enable the radio to function (product is blaupunkt vienna rcr 46p)

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 65 Answers

Key code can be enter by turning the volume knob to select the digit.

Posted on Nov 28, 2013

6 Suggested Answers

  • 2 Answers

SOURCE: need security code for car radio

take out the radio by just pulling it toward u and take it to a holden dealer and they will get the code for u for $40

Posted on Jul 12, 2009

  • 71 Answers

SOURCE: Blaupunkt car audio show error4

you can either leave the ignition on for 1 hour and hope it resets. or take your manual and radio information to peugeot they should give you the code.
try any of these as they may work depending on the model.

3728 1728
2256

Posted on Nov 28, 2008

alicantecoli
  • 21990 Answers

SOURCE: I just changed battery and

look in the handbook for the radio,it should tell you how to put the code in.most radios accept the code via the preset tuning buttons,ie first number is number one and so on then press number five to lock it in ,but some radios you press number one for first nunber then when its entered via tuner up and down press one again and enter second number.then am/fm button to lock but some use the tape player play knob ,really is confusing trust me on this .Change a customers battery and then find they dont have code number,also often happens is that change battery and dammed factory immobiliser cuts in...Who would be a mechanic?? any rich widows out their ??

Posted on Jan 01, 2009

  • 28 Answers

SOURCE: car radio codes

could try 5555 or 1555

Posted on Jan 18, 2009

  • 28 Answers

SOURCE: Blaupunkt montreal sqr 48 car radio not working

disconnect the battery for five minutes and reconnect and it will ask for code

Posted on Jan 22, 2009

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Lost radio code for Philips 22DC279/62R - Renault


When you disconnect your battery and then reconnect itagain, it disables the radio. This is an anti-theft protection for your carradio.
The enable your radio the activation code is in your vehicle owner's manual. Ifyou do not have this code you need to go to your Renault servicecentre and get them to enter this code for you.

May 30, 2012 | Car Audio & Video

1 Answer

I need a code to unlock my ford radio M189934 please can someone help with a 4 digit code


When you disconnect your battery and then reconnect itagain, it disables the radio. This is an anti-theft protection for your carradio.
The enable your radio the activation code is in your vehicle owner's manual. Ifyou do not have this code you need to go to your Ford service centre andget them to enter this code for you.

Feb 19, 2012 | Car Audio & Video

2 Answers

1995 chev locked after removing battery. radio is also a cassette


This is the anti-theft for your radio, normally this is something the dealer needs to enter a code to clear this for you (however they will charge you approx $45).
Here is something you can try...
Press & hold the 2 & 3 buttons @ the same time for about 10 seconds; a 2 or 3 digit code will appear, write this # down,press & hold the am/fm button for about 10 seconds: another code will appear, write this # down, then call 1-800-537-5140 and enter 202108 followed by the # key, then enter the #'s that you wrote down from your radio followed by the * key. The call will give you a 3 or 4 digit override code. Write this code # down so you have it if you ever need it again. Enter this # into your radio following the instructions in your owners manual. If you get an override code that starts with 0, you drop the 0 when entering the code into your radio.
If you don't have an owners manual, try this, press & hold the hour button until the first 2 digits of your code come up, then press & hold the minute button until the last 2 digits show. Then press the am/fm button. This should reset your stereo. It did mine.
Hope you find this helpful.

Jun 20, 2011 | Car Audio & Video

1 Answer

Need radio code for Chevy venture 2003


radioo
02-20-2006, 02:03 PM
Only a GM dealer can unlock the radio.

It is much smarter to disable lockout entirely, with MP3/WMA, DVD and XM-ready stereos, the regular CD, cassette, and radio-only units aren't so hot.

The following applies to an unlocked powered-on radio (2000 shown)

1. Do not disconnect the battery

2. Press the stereo's "1" and "4" buttons at the same time for five seconds with the ignition on and radio power off. he display will show "SEC", showing anti-theft is on

3. Press the MN button, the display will show "000"

4. Press the MN button until he last two numbers are the same as your secret code (how do you find this? you decide the code?)

5. Press HR until the first one or two numbers displayed match your code. The numbers will be displayed as entered.

6. Press "AM/FM", if the display shows "_ _ _ " you have disabled Theftlock, if "SEC" is shown, it is still in Theftlock

01-30-2010, 02:14 AM
I just tried this for my 1998 Chevy Venture and it works! press the 2 & 3 numbers at the same time for about 10 seconds; a 2 or 3 digit code will come up; press the am/fm button for about 10 seconds; another code will appear; dial 1-800-537-5140 and enter 106010 followed by the # sign; enter the 4 or 6 digit code from your radio followed by an *; the phone number will give you a 3 or 4 digit override code; enter this code into your radio just as your owners manual tells you to - use the hour and minute buttons to put in the unlock code, Press AM/FM button, "SEC"---" will display and You can turn on the radio. I had tried this with another dealer code and it wouldnt work, but with the 106010 dealer code it worked just fine, my unloc code was 0120

Jan 21, 2011 | Car Audio & Video

1 Answer

Clarion pu 1570 radio cassette not responding


If You know the code:
1. Turn radio On
2. Display say "Code in"
3. Enter the Code by memory station buttons (4 digits)

If You enter wrong code for the first time:
1. Turn radio off.
2. Turn radio on
3. Press and hold the band "~" button
4. Display shows ====
5. Wait till display say "code in"
6. Enter the code by mem. station buttons.(4 digits)

Important:
You mast wait by Radio ON in = = = = condition,
and not in - - - -!
The max. waiting time is 90 min.

TIP:
Tested by PU-1570A Eeprom 93C46
1. Radio Off
2. Press and hold the Band "~" Button.
3. Turn the radio ON
4. Enjoy!

Apr 22, 2010 | Car Audio & Video

2 Answers

I have lost my radio code for my ford can you help.


Late Four Digit Ford Radio Codes (no SELECT button) ie. Ford 3000 Traffic, 4000RDS, 5000RDS, 6000RDS, 6006E, etc Switch the radio on and the word CODE should appear in the display Repeatedly press button 1 until the correct first digit of the code is displayed.
Repeatedly press button 2 until the correct second digit of the code is displayed.
Repeatedly press button 3 until the correct third digit of the code is displayed.
Repeatedly press button 4 until the correct fourth digit of the code is displayed.
Once the code has been correctly selected on the radio's display, press button 5 to enter. If "LOCK 10" is shown on the display, please contact us for guidance. If the display shows "LOCK 13" code entry will not be possible, and the unit will need to be electronically decoded by a car radio servicing specialist. Early Four Digit Ford Radio Codes (units with SELECT button) ie. Ford 2005, 2006, 2015, etc Switch the radio on and the word CODE should appear in the display. If CODE does not appear immediately, press the SELECT button momentarily, and CODE should then appear on the display. Repeatedly press button 1 until the correct first digit of the code is displayed.
Repeatedly press button 2 until the correct second digit of the code is displayed.
Repeatedly press button 3 until the correct third digit of the code is displayed.
Repeatedly press button 4 until the correct fourth digit of the code is displayed.
Once the code has been correctly selected on the radio's display, press the "SELECT" button to enter. Three Digit Ford Radio Codes ie. Ford 2000, 2001, 2005, 2007, etc Switch the radio on and the word CODE followed by three dashes should appear in the display. These three dashes should be flashing. Enter the three digit code by repeatedly pressing station presets 1-3 until each digit is correctly displayed, followed by preset 4 to accept the code. The unit should then function normally. If, after switching the radio on, the three dashes do not flash, then 3 or more incorrect code entries have been attempted. If a number 10 appears in the display, then ten incorrect codes have been tried and the unit will need to be decoded by a car radio servicing specialist.

Jan 25, 2010 | Car Audio & Video

1 Answer

Transit radio code


Your FORD radio code is: 5456.Do You know how to entered?If not just follow the steps bellow: Press preset[1]repeatedly for the first digit, [2] for the second,[3] for the third and [4] for the fourth.Then press [5] to accept.If the display showsLOCK 10,turn ON the radio whilst holding down [6]You can then enter the code. If you are unable to enter a code,leave the radio powered up for one hour to reset.

Jan 12, 2010 | Car Audio & Video

2 Answers

I have a ford radio thats been disconnected ive reconnected but can,t enter the code which the ford dealer gave me it just keeps flashing err


You will have to take the radio to a repair agent to fix this error either thecode provided was wrong or somebody has tried to enter the code wrong to many times, i use http://www.radio-code.co.uk/ford-radio-codes.html?gclid=CJiOvYas950CFeZr4wodQRNAqw you can send it in and they will fix it for a charge.

Nov 11, 2009 | Car Audio & Video

1 Answer

Error 4 code on peugeot radio


Turn your radio on, and leave it untouched for an hour (max) It will then display ---- you can now enter your radio code. If you are unsure of your code then check out this link http://www.306gti6.com/forum/showthread.php?id=64063&page=1

Mar 30, 2009 | Car Audio & Video

Not finding what you are looking for?
Car Audio & Video Logo

Related Topics:

329 people viewed this question

Ask a Question

Usually answered in minutes!

Top Blaupunkt Car Audio & Video Experts

xxxxxx xxx

Level 3 Expert

4732 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Blaupunkt Car Audio and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...