Question about Whirlpool LSN2000LW Washer
Will not spin
Posted by Anonymous on
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
lid switch is bad chance are you can by pass this by removing the timer header and crossing the outer wire on the lid switch that it mounted closest to the lid not the power cord this will tell you if you need a switch
Posted on Dec 03, 2007
check the lid switch operation,not sure what the noise could be maybe somthing stuck in the pump? hope ths helps unless the contacts in the timer are faulty i have opened up a few timers and fixed the contacts short term.
Posted on Mar 09, 2008
Are you in the Delicate Cycle? Do you have spin speed control set for slow?If both answers are no,than what is the model & serial number??
Posted on May 21, 2008
Tip the washer backward, inspect the bottom of the gearcase for oil. If oil is present, the oil has migrated to the clutch causing it to slip during spin. The gearcase and clutch will have to be replaced if oil is present. Check the owners manual for limited warranty on the gearcase. If oil is not present, the clutch is just worn and should be replaced.
Posted on Oct 05, 2008
HI It sounds like the spin basket drive is going bad. If it was the lid switch, you would get no sound. Let me know if I can assist you further.
Posted on May 16, 2009
Tips for a great answer:
Oct 25, 2017 | Whirlpool Ultimate Care II LSQ9564J Top...
Apr 20, 2010 | Whirlpool Ultimate Care II GSQ9669L Top...
Jan 29, 2010 | Whirlpool Ultimate Care II LSQ9549L Top...
May 16, 2009 | Whirlpool Ultimate Care II LSQ9564J Top...
Apr 28, 2008 | Whirlpool Ultimate Care II LSQ9564J Top...
Apr 13, 2008 | Whirlpool Ultimate Care II LSQ9549L Top...
Dec 03, 2007 | Whirlpool Ultimate Care II LSQ9549L Top...
54 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: