Question about HP LaserJet 4650 Color Printer
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: My HP color laser jet
This is what HP says about error 49:
Control Panel Message:
turn off then on
A critical firmware error has occurred that
caused the processor on the formatter to
abort operation. This type of error can be
caused by invalid print commands, corrupt
data, or invalid operations. In some cases,
electrical noise in the cable can corrupt
data during transmission to the printer.
Other causes include poor-quality parallel
cables, poor-connections, or home-grown
programs. On rare occasions, the formatter
is at fault, which is usually indicated by a 79 Service Error.
1. Turn the printer off then on.
2. Press Stop to clear the print job from
the printer memory.
3. Turn the printer off then on.
4. Try printing a job from a different
software program. If the job prints, go
back to the first program and try
printing a different file. If the message
displays only with a certain software
program or print job, contact the
software vendor for assistance.
5. If the message persists with different
software programs and print jobs,
disconnect all of the cables to the
printer that connect it to the network or
6. Turn the printer off.
7. Remove all memory DIMMs or thirdparty
DIMMs from the printer. (Do not
remove the firmware DIMM.)
8. Remove all EIO devices from the
9. Turn the printer on.
10. If the error no longer exists, install
each DIMM and EIO device one at a
time, making sure to turn the printer
off and on again as you install each
11. Replace a DIMM or EIO device if you
determine that it causes the error.
12. Remember to reconnect all of the
cables that connect the printer to the
network or computer.
13. If the error persists, upgrade the
firmware compact flash card.
14. Replace the formatter and calibrate
If I could be of further assistance, let me know. If this helps or solves the issue, please rate it.
Posted on Dec 11, 2008
The problem is usually caused by printing a PDF file with fonts/page size/ page formating errors which will cause the printer to display the 49.3048 error. The only way to use the printer is to POR or recycle the power and delete the print job from the server or spooling device and cancel it on the printer before the offending command is issued to the printer again. You can try updating the firmware to the latest version 46.140.5 from the HP website. MIke L.
Posted on Jul 20, 2010
Tips for a great answer:
Sep 25, 2014 | HP Laserjet 2605dn Workgroup Laser Printer
Jul 21, 2014 | HP Office Equipment & Supplies
Mar 22, 2013 | HEWLETT PACKARD - LASER JETS New - Hp...
Jan 22, 2013 | Dell PowerEdge 2850 3.8GHz 2u Server...
Jan 27, 2010 | HP Color LaserJet 4500n Printer
Aug 12, 2009 | Office Equipment & Supplies
Jul 31, 2009 | Office Equipment & Supplies
Jul 06, 2009 | Office Equipment & Supplies
Mar 02, 2009 | HP Color LaserJet 2600n Printer
Feb 07, 2009 | HP Color LaserJet 3500 Printer
604 people viewed this question
Usually answered in minutes!