Question about Safety 1st 08024 Hi Def Dig Monitor

Open Question

My safety 1st 08024 baby monitor has no volume control, it's either too loud or mute

Posted by on

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: add a camera to safety 1st baby monitor

1. Place camera and handset no more than 1 foot apart.
2. Select "Device" on handset and highlight "Add."
3. Press and hold button on camera. When green light starts to blink rapidly, press right on handset while continuing to hold camera button in.
4. When handset says "Please Wait," camera button can be released. "Successful" will display on handset screen when camera has been added.

Posted on Sep 18, 2009

Dorel UK
  • 1629 Answers

SOURCE: I have a safety 1st

Good Evening

The light on the camera unit not being illuminated indicate this is where the problem lies.

Ensure that the camera unit is plugged in and press the power button on the camera unit. If the camera unit does not switch on this is what has failed and you require a replacement - please contact your retailer. If the camera unit switches on and the parent unit is unable to establish a connection follow the instructions in the user manual to add a camera.

Posted on May 24, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have to turn the avr 7200 way up to get somewhats of a loud responce, but when there is no music, i hear a hsising noise. I never used this reciever in 10 years. what could it be?


Unless permanent hearing damage and the destruction of your equipment is a goal, NEVER USE MAXIMUM VOLUME FOR TROUBLESHOOTING or any purpose.

Turn the volume control to something medium.

The errant switch, control or condition may change and you will suddenly release the amp's full power and possibly destroying your speakers. If a signal isn't audible at 1/2 volume it's probably not there.

Carefully examine the front panel for clues like a misplaced Source Selection, Mute, Tape Monitor control or Multichannel Analog Input selected.

There is a good chance that a common control may have developed a high-resistance or 'dead' spot through defect or idleness and is causing your symptom. Turn the POWER OFF and operate every control throughout its range a number of times, especially rarely-used ones like Tape Monitors and the Mute control.

Turn the volume to something reasonable and see if that helped.

Aug 10, 2011 | Harman Kardon AVR 7200 Receiver

1 Answer

I have no sound out of the front speakers. Mute button is off, speakers work fine. Only have sound (very little) if volume is turned way up.


NEVER USE MAXIMUM VOLUME FOR TROUBLESHOOTING.

Turn the volume control to something medium.

The errant switch, control or condition may change and you will suddenly release the amp's
full power and possibly destroying your speakers. If a signal isn't audible at 1/2 volume
it's probably not there.

Carefully examine the front panel for clues like a misplaced Source Selection, Mute, Tape
Monitor control or Multichannel Analog Input selected.

There is a good chance that a common control may have developed a high-resistance or 'dead'
spot through defect or idleness and is causing your symptom. Turn the POWER OFF and operate
every control throughout its range a number of times, especially rarely-used ones like Tape
Monitors and the Mute control.

Turn the volume to something reasonable and see if that helped.

Jul 10, 2011 | Yamaha RX-V870 Receiver

1 Answer

How do I get a replacement battery for my safety 1st true view color video monitor?


I went on Amazon last week for the exact same issue. Mine was an older model though so I couldn't get replacement parts. I did however see a link under their Safety 1st products for replacement parts for video monitors. Try there. Good luck!

Apr 04, 2011 | Safety 1st True View Video Monitor

1 Answer

Does the monitor that stays in the bedroom need to be plugged in to the power supply at all times cause as per instructions and unplugged it loses charge. this is on the safety 1st digital monitors


Does the monitor that stays in the bedroom have a battery? Many monitors do not have a battery in the base.
Check for a battery: If there is one, it probably needs to be charged for at least 12 hours. If there is no battery, it needs to be plugged in to function.

Oct 15, 2010 | Safety 1st Baby Monitor

1 Answer

Safety 1st High Def Video monitor screen white


Hello,

You can call this number : (800) 544-1108
(7 a.m. to 6 p.m. EST Monday through Thursday,
and 7 a.m. to 4:30 p.m. EST on Fridays


Thank you

May 03, 2010 | Safety 1st Baby View Black & White Video...

1 Answer

Safety 1st Video baby monitor - replacement wires?


Hi,

I would suggest that you contact the manufacturers (Dorel UK), the link is below:

http://www.dorel.co.uk/safety-1st/

Sep 14, 2009 | Safety 1st Two Ways Tandem 01-668 Twin...

Not finding what you are looking for?
Safety 1st 08024 Hi Def Dig Monitor Logo

Related Topics:

106 people viewed this question

Ask a Question

Usually answered in minutes!

Top Safety 1st Baby Gear Experts

Dorel UK
Dorel UK

Level 3 Expert

1629 Answers

Jennifer Rock
Jennifer Rock

Level 2 Expert

105 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18389 Answers

Are you a Safety 1st Baby Gear Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...