Question about Dishwashers
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
The number of flashes indicates the fault. Reset machine by holding down the start button for 3 secs, then start a new cycle. If fault reoccurs, the number of flashes indicates fault eg 3 flashes, stop, 3 flashes stop, indicates F3 fault.
Faults listed below- advice on repair depends on which fault your machine is indicating, but may give you an idea of what to look for
1flash=NTC (temperature sensor) break- NTC outside normal range.
2flash=water leakage-float switch in base activated.
3flash=heating fault(check element.NTC,control board).
4flash=drain error-blockage in pump or drain system,or faulty water indicator switch.
6flash=water inlet fault-check inlet valve, check inlet hose not kinked
7flash=flow meter failure (flow meter measures water intake volume-large plastic weir located on left hand side of machine-reomve side panel to access)
These a most common faults, but further advice on repair requires counting flashes when fault occurs.
Posted on Aug 09, 2009
Tips for a great answer:
Dec 17, 2010 | Whirlpool Dishwashers
Apr 20, 2017 | Dishwashers
Jun 28, 2010 | Dishwashers
Jan 14, 2010 | Dishwashers
Sep 17, 2009 | Whirlpool 24 in. ADP6940 Dishwasher
Aug 09, 2009 | Whirlpool Dishwashers
Feb 08, 2009 | Kitchen and Much More Dishwashers
70 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: