Question about Samsung ML-1630 Laser Printer

Open Question

My Samsung ml-1630 printer makes a clicking noise when printing.

Could it just be that it needs a new toner cartridge? If so then why doesn't it show the code for that on the lid?

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

bhagyavichar
  • 414 Answers

SOURCE: Refilled toner for ml 2245 samsung printer doesn not print

dis is quite common problem..don't panic..
did u change / replace the cartridge with original spare or refilled it??
this kind of problem often follows with an unbranded cartridge change and or refilling..!!
least chance of the defective cartridge itself causing such problem..!!
however always try to use genuine refill packs/toner..
..contact ur system admin/vendor....

Posted on Oct 26, 2009

  • 1 Answer

SOURCE: samsung ml-2240 printer is not accepting refill toners please hel

my samsung printer is model ml-2240 is not accepting refill toners please help, it is showing message that toner is exuasted, even though i refilled it, plesae help?

Posted on Nov 01, 2009

  • 1 Answer

SOURCE: can't figure out how to replace toner on Samsung ML-2240 printer

First remove the paper tray. The front of the printer pulls down from the top. Look at the top on the right and left side and you'll see a thin plastic finger grip. Grasp both sides at the same time and pull towards you. It will snap open. Look inside and you will see a handle on the cartridge. Pull it towards you. Open the new cartridge sealed bag and very carefully push it in. You will know when it has set in position.

Posted on Feb 27, 2010

haivanko
  • 37 Answers

SOURCE: how can i do 0 for ml-1640 page count ,and want to resetpagecount

You have to flash the printer with the fixed firmware and it will never ask you again for a new toner cartridge :) it is a 1 minute job for me and i charge my Local customers 10 Euro mostly because it has to be done just once and then you just refill the cartridge without doing anything else ( this is just an explanation - i don't want your money)

Posted on Jun 07, 2010

  • 1 Answer

SOURCE: Hi have samsung ml 2240 printer top light is

its of Paper count problem. tourn of printer power and open the back cover and find the IC 366...... ita a small 8 pin ic just short Pin NO 1 And 4 just restart the printer ur problem has been resolaved

Posted on Jul 28, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Have T2 error message. What does this mean, It won't print.


This message appears
when the toner is
completely empty, and
your machine stops
printing. Replace or refill cartridge .

Apr 03, 2016 | Samsung ML-1630 Laser Printer

1 Answer

I have Samsung ML-1666 Laser Printer. I am getting


I would not advise you to refill a toner cartridge becausethe toner powder is very fine and you do not want to breath in this tonerpowder.When the toner cartridge is exhausted or empty then theprinter will not be able to print further documents or the prints will be veryfaint.You may be able to print a few more pages by removing thetoner cartridge and shaking the toner cartridge in a horizontal position a fewtimes and then placing it back into the printer.This will give you an opportunity to print a few more pages and giveyou time to purchase a new toner cartridge for your printer. A cheaperalternative is to purchase a re-manufactured toner cartridge for your modelprinter.A re-manufactured printer cartridge also replaces worn partsas well as refilling with toner powder.

Jun 02, 2012 | Samsung Office Equipment & Supplies

1 Answer

Small dots on printed page


You most likely have to clean your toner drum, or clean your transfer sheet.

if you use a non Samsung cartridge that was "compatible" there is a chance that the cartridge was refurbished, and some refurbished toner cartridges to do leak.


your best bet is to clean what ever parts you can get your hands on, the manual should explain where those parts are.
http://www.samsung.com/levant/consumer/printers-multifunction/printers/mono-laser/ML-1630/XSG-support

May 26, 2012 | Samsung ML-1630 Laser Printer

1 Answer

Just installed Mac OSX 10.6 and I can no longer print on the Samsung ML-1630. Downloaded from disc.


1: go to System Preferances 2: go to Print & Fax 3: Right Click the white box on the left 4: Click reset Printing System 5: reinstall software,

Mar 18, 2011 | Samsung ML-1630 Laser Printer

4 Answers

My Samsung ML - 191x 252x Series printer has a red light, does that mean I need to replace the toner cartridge? And if so, do I have to do it immediately, or does it still have some ink left?


Hi guys, The solutionto your problem is simple, just press the button just above the on/off buttonto print out the start of the printer. Make sure to see the "Toner Remaining" .

May 24, 2010 | Samsung ML-2510 Laser Printer

1 Answer

ML 2010 Laser Printer: have aquired a samsung ml-2010, have installed dri...


Hi,

have you tried replace a new toner. If new toner also giving out noise. it is most likely the main drive issue.

May 17, 2010 | Samsung ML 2010 Laser Printer

1 Answer

ML-1630 Ti error after refill


You are right .
The toner cartridge
which the arrow
indicates is not
suitable for your
machine is what the manual says. There is no firmware fix for your model yet . You should change the chip.

May 18, 2010 | Samsung ML-1630W Monochrome Laser , up to...

1 Answer

Refilled toner for ml 2245 samsung printer doesn not print


dis is quite common problem..don't panic..
did u change / replace the cartridge with original spare or refilled it??
this kind of problem often follows with an unbranded cartridge change and or refilling..!!
least chance of the defective cartridge itself causing such problem..!!
however always try to use genuine refill packs/toner..
..contact ur system admin/vendor....

Oct 26, 2009 | Samsung ML 2010 Laser Printer

Not finding what you are looking for?
Samsung ML-1630 Laser Printer Logo

Related Topics:

101 people viewed this question

Ask a Question

Usually answered in minutes!

Top Samsung Office Equipment & Supplies Experts

mukhtar21 shaikh
mukhtar21 shaikh

Level 3 Expert

2017 Answers

HEMANT GROVER

Level 2 Expert

167 Answers

CheckitRight
CheckitRight

Level 3 Expert

1362 Answers

Are you a Samsung Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...