Question about Philips Televison & Video
I have a philips sbc md110 and it's fully functional (i tried it with other devices and it works just fine) and when i plug it into my imac 27'' 2010 line- in and select line input, i don't get any sound does anyone know if you need to download a driver or a use preamp?
Sometimes the remotes control, need to be reload.
Is a good idea to go to the web from Philips http://www.philips.com/c/catalog/catalog_selector.jsp and give your model, etc, and download the exactly code for your model imac. If you have some additional trouble you can get assistance from them. So they made the remote, and the RAM, has special design, and by that reason they can fix it, with better security.
sincerely. God bless you.
Posted on Feb 15, 2012
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Apr 12, 2014 | Philips SBC HP400 Headphones CS01 Stereo...
Oct 08, 2012 | Philips 27PS55S 27" TV
Reset your GoGear with something sharp like the tip of a pen or the end of a paper clip,
if you're device isn't working properly or there's a frozen display.
Insert the sharp object into the "Reset" hole (located at the bottom of the player), and hold it there until the device turns off.
If resetting the device does nothing to restore the display, access the "Philips Device Manager" through your computer to recover the GoGear.
Click "Start" on your computer, then "Programs," "Philips Digital Audio Player," "Aria Device Manager," and then "Philips Device Manager."
This will launch the "Philips Device Manager." Make sure the GoGear is turned off completely. Connect your GoGear to your computer while holding down the "Volume Up" button.
Continue to hold the "Volume Up" button on your GoGear, until the "Philips Device Manager" recognizes the device and enters recovery mode.
Click the "Repair" button when it appears on your computer, then folow the steps to fully recover the GoGear.
Properly disconnect your GoGear from your computer and restart the device.
Recharge your device if your GoGear dies suddenly while playing.
Connect the GoGear to your computer via the supplied USB cord.
Plug one end of the USB cord into a functional, open USB port on your computer. Plug the free, smaller end of the USB cord firmly into the small USB jack on your GoGear and turn your computer on.
This will begin the charging process of your GoGear.
If recharging doesn't work, the battery may need to be replaced.
Check that your GoGear isn't in standby mode. Hold the "Power" button for two seconds to turn it back on.
hope this helps
Oct 07, 2012 | Philips GoGear ViBE SA1VBE08K MP3 Player
Apr 17, 2012 | Philips GoGear ViBE Digital Media Player
Jul 31, 2011 | Audio Players & Recorders
Feb 23, 2011 | Philips Audio Players & Recorders
Feb 09, 2011 | Computers & Internet
Jan 23, 2010 | Audio Players & Recorders
Apr 04, 2009 | Philips (33-01-031) Headphones
Aug 14, 2017 | Philips 46PFL5705D/F7 46-Inch 1080p 240 Hz...
451 people viewed this question
Usually answered in minutes!