Question about HP PSC 1210 All-In-One InkJet Printer

1 Answer

Prints but can't read it

I can barely read what I print with HP PSC 1210 using Windows Vista. It was working fine 'till my wife started printing lots n lots school stuff. Now, it seems like the printed data went through a very blunt shredder. Any clues? btw, everything else still works. Thanks

Posted by on

  • nsoul Oct 25, 2008

    I did as you said above. Some of the data was ok but some were still the same - like the paper was pulled while it was printing. This happens horizontally as well as vertically. Any more clues? Thanks

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Mentor:

    An expert who has written 3 tips or uploaded 2 video tips.

  • Expert
  • 115 Answers

Buy a new ink Cartridge.
Take it out shake it a bit, put it back, if it prints darker for a little bit. You need a new ink cartridge..

Posted on Oct 25, 2008

  • Mike S
    Mike S Oct 25, 2008

    “Paper was pulled while it was printing “is that Skewing?



    There are a few possibilities... a few things you can try...



    First thing. Clean the machine; take out the Ink cartridges, clean the heads of them and inside the printer where the print cartridge makes contact, clean with a q-tip and a touch of alcohol.



    Clean the rollers in side the machine as well with a cloth and a bit of alcohol and spay out a bit with a can of air... let dry put ink cartridges back in.



    Go to your printers and faxes folder in your pc (it is in the control panel), right click on the printer in question, and select properties.



    A pop up window should open, on of the tabs there is a selection to align and clean printer.

    Do that a few times...



    Your printer cartridge heads could be clogged, or inside the machine could be clogged as the ink will dry out sometimes...



    I hope this helps...






×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to resolve colour misalignment in ricoh c4000 prints


get to the device manager and do an alignment for the printer

Jan 09, 2017 | Ricoh Office Equipment & Supplies

1 Answer

Need to change font size larger when printing


Change the font on your document before printing

Jan 12, 2015 | Office Equipment & Supplies

3 Answers

My Epson WF-3640 is printing with gaps in the text. How do I fix this issue?


Make sure you should remove shipping tape from the ink cartridge. These taps are used to protect printer during shipping but you have to remove it before starting printing. Beacuse these taps prevent the ink to entering in print head. If you will not found shipping tape in your printer then there is terr off strip, remove it. The tear off strip seals the the vent holes on the top of the cartridge to prevent it from drying out on the shelf or during shipping.
After ensuring that the shipping tape has been removed, run the printer's "Head Cleaning" utility to prime the cartridge, then print a test page.
See full detail at- http://guideusermanual.com/product-name-workforce-wf-3640-manual&po=152836&lang=English

Sep 18, 2014 | Epson WorkForce WF-3640 Wireless Color...

1 Answer

Can i print Recipes & Instructions book


Yes you can! Here are a few sites for recipes. Kraftfoods.com, cookiefest.com, foodtv.com cookiesetc.com bonniescookies.com, ETC, If you want more recipe sites. Just type in on pc, what your looking for. Crafts, recipes, or what ever. My wife uses the recipes a lot. If you do not know how to make a certain thing, just type in search bar on pc. Hope this helps! Good-Day!

Aug 29, 2014 | Office Equipment & Supplies

1 Answer

How can i calibrate print head of pagewriter trim 1


It would help if you stated the manif. example. Phillips, HP, hewlett Packard. ect.

You should be able to find service information on the bottom of unit.

May 08, 2014 | Office Equipment & Supplies

1 Answer

Prinnter not printing but showing 'put custom in manual tray'


There is still a print job in the queue. Place a sheet so it prints or kill the job.


Open Printers and Faxes. Open printer. Highlight jobs and Right click > Cancel, or Documents > Cancel.
For those stubborn jobs, Right click My Computer > Manage. Choose Services and Applications > Services > Print Spooler. Right click and stop. Then start. This may have to be done from the Print Server if it's network printer. Contact IT to kill.

Nov 09, 2012 | Office Equipment & Supplies

2 Answers

Okidata Microline 30 Turbo dot matrix


The problem your having is a spacer motor. It's located under the carriage that holds the ribbon/printhead. The part number is 56513701. Available at Seattle Platen - Dale 1800-221-2388.

Here's a free copy of the Okidata 320T service manual that will walk you through testing and verfying before ordering the replacement part.

If this helped you, please hit me up with a FIXYA. Thanks.

http://www.feedroller.com/Store/Service%20Manual/SER320T.PDF

Aug 30, 2008 | OKI MICROLINE 320 Turbo Matrix Printer

1 Answer

Problem installing drivers for HP 4355 printer in vista 32bit OS


Vista OEM Cd usually doesnt come with drivers.

Printer should have come with its own cd which contains both the software & drivers.

If it didn't come with any
You can try using windows update
or
downloading drivers from hp site

http://h10025.www1.hp.com/ewfrf/wc/softwareList?os=2093&lc=en&cc=us&dlc=en&product=1138373&lang=en

Feb 24, 2008 | Office Equipment & Supplies

2 Answers

Samsung kicked out hp 3in 1 printer already installed


Don't have your HP designated as the default printer (if possible)when you hook up the Samsung. When the Samsung is hooked up it sees the HP is the default printer. Well it can't have that, they discard the HP drivers. What does Samsung care about HP drivers theres only one printer port setup and thats the USB port you have them sharing. So yes you need to get a second cable. Tim

Jan 29, 2007 | Samsung SPP-2020 Thermal Photo Printer

Not finding what you are looking for?
HP PSC 1210 All-In-One InkJet Printer Logo

Related Topics:

70 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Office Equipment & Supplies Experts

Seeker5211
Seeker5211

Level 3 Expert

1089 Answers

kakima

Level 3 Expert

101642 Answers

mukhtar21 shaikh
mukhtar21 shaikh

Level 3 Expert

2017 Answers

Are you a HP Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...