Question about Lexmark Z33 InkJet Printer

2 Answers

Lexmark z33 won't print

I have downloaded a new driver.
I think the port is correct.
I've gone through the troubleshooting guide and still can't print.

Can anyone help?

Posted by on

  • 2 more comments 
  • CSRBC Oct 25, 2008

    I discovered that my husband just plugged the printer in without installing the disc.

    I'm so sorry to have taken up your time.
    It has been installed but I'm still having trouble. I can print a test page etc but not a text page that I want to print.
    Dealing with the drivers is time consuming and I want to toss it out the window and sit on my Mac which accepts pretty much everything and ignore his PC.
    I need to print this document so I will persevere.

    Cheers
    Carol




  • CSRBC Oct 28, 2008

    bbby,

    "pingin download" means nothing to me.
    Please be more specific.
    Thanks


  • srwilliams Jan 04, 2009

    I reinstalled the printer using the original installation disc, but it still will not print.

  • Mike S
    Mike S May 11, 2010

    What operating system are you using?

    Did you install the correct Drivers?

    Are the lights on or blinking? (is it plugged in to the power)

    Have you tried to print a test page?

    Does your PC give an error when you try to print?



    This machine connects USB, that should be a USB Virtual Port, if your looking at your ports list in the printer driver properties!



    Open the Safely remove hardware window (little green arrow that should be by the clock)

    See if the printer is listed there

    Disconnect the USB cable, look at the USB connected device window again, see if it is listed or not.

    Reconnect the USB cable and look at the USB Connected devices again to see if it is there.

    Change the USB port which the cable is plugged into, or Plug it into another USB port?



    If your using windows you can look at the device manager see if it is listed there.











×

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Mentor:

    An expert who has written 3 tips or uploaded 2 video tips.

  • Expert
  • 115 Answers

If you can print a test page, your computer is and printer is working, and communicating.
Go to the control panel of the PC open "Printers and Faxes"
set the printer as the Default..
or when you try to print from a program and the window pops up. make sure you are selecting the correct printer..
Good luck


Posted on Oct 28, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Pingin download

Posted on Oct 28, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where can I get am XP Printer for my Lexmark Z33 printer? Thx.


Please visit the Lexmark website to download and install the Lexmark Z33 printer driver on your computer. Execute the file and simply follow the instructions on your computer screen.

Oct 21, 2011 | Lexmark Z33 InkJet Printer

1 Answer

Z33 does not print,comes upscript error line 1829


I assume you are running Windows 9 and you have not downloaded the Win 7 drivers from the Lexmark site. This is a driver compatibility issue with Vista drivers on Windows 7. Go to

http://support.lexmark.com/index?segment=SUPPORT&userlocale=EN_US&locale=en&productCode=Z33_COLOR_JETPRINTER&page=product&frompage=null#1

and read the instructions for downloading and updating the drivers for your Z23.

Oct 29, 2010 | Lexmark JetPrinter Color Z33 InkJet

1 Answer

Lexmark Z33 printer hooked up to older 2000 Milinium Microsoft. Can't get any other printer to download into old system. Lexmark, great printer has been installed for years. My accounting is stuck in this...


http://downloads.lexmark.com/perl/downloads/downloads.cgi

If you go to this link (above) these drivers are for Windows 2000 which is actually a different operating system than Windows Millennium. And too I can not locate drivers for Windows ME. If you need them perhaps you can locate the original installation cd that came with the printer. I am hoping your computer is the 2000 because that has the NTFS (new technology file system) as the other know as FAT32... Windows2000-2003server-WinXP are all NTFS.

Remove the old print driver through Add and Remove Programs, in the control panel. Disconnect your printer from your computer until your are instructed to connect. Install the new software you download and run the program setting it up as per instructions. Connect printer,
You also may want to open the tools in the printer and run the printer alignment.
Hope this does it for you, Please leave rating
thank you kindly


May 08, 2009 | Lexmark Z33 InkJet Printer

1 Answer

Z33 Lexmark Printer drivers


Do not download driver detective, download the original driver from Lexmark website below.

Also, instead of double clicking on driver installer after downloading, click right mouse button and chose "Run as administrator".

If you do not have the disk you must download the software from Internet, follow instructions below,

Click here:Official Lexmark Drivers and Software

A web page will open, follow instructions, select model, select operative system etc., and click on download .
Chose to download the file in my documents when asked.
After downloading, find the file,double click on the file ,then if you get in troubles, follow the instructions below to reset and reinstall drivers:

  • Unplug printer USB.
  • Go to control panel >> installed printers in Windows and remove (delete ) any installed printer from printer list.
  • Download driver from website, or use the disk and run the install file.
  • Follow driver installation wizard.
  • Plug back printer when prompted from installation wizard.

Mar 29, 2009 | Lexmark JetPrinter Color Z33 InkJet

1 Answer

Lexmark z33 printer


its available for free download at
www.lexmark.com

select drivers and downloads
then select driver finder from the drop down list

enter your model z33

select your windows

download driver.

Nov 17, 2008 | Lexmark Z33 InkJet Printer

2 Answers

Lexmark z33 with VISTA


hi
on looking at the lexmark site has no vista drivers for this printer
Drivers and Downloads
seems they only went as far as xp im afraird.

riz.


Jun 14, 2008 | Lexmark Z33 InkJet Printer

1 Answer

Add printer to network (Lexmark Z33) useing add printer wizard I tried to add a printer. You are about to connect to a printer, which will automatically install a print driver on your machine .then I...


Are you connecting this by sharing it from a computer connected to the printer thru a local connection? If so, be sure it has the driver loaded for the operating system you are using on the other computer.

Jun 13, 2008 | Lexmark Z33 InkJet Printer

2 Answers

Lexmark z33


You can download the driver here, directly from Lexmark:

http://downloads.lexmark.com/cgi-perl/downloads.cgi?lxkprod=Z33+Color+Jetprinter

Select Windows XP from the list, and download.

Be sure to UNPLUG the printer from the PC before installing. ONLY plug it in once the on-screen instructions tell you to do so.

Apr 25, 2008 | Office Equipment & Supplies

2 Answers

Lexmark Z33 Cable Problem


hi dear


trying to change port of usb where your connect, or try to change your USB cable

oke

Mar 27, 2008 | Lexmark Z33 InkJet Printer

1 Answer

Using window XP OS with Lexmark Z 33


Is the file data getting through to the printer. Check settings/printer/ right click OPEN. You should see file ready to be printed. Does the paper feed work? Have you downloaded the correct drivers?
Check connections to the printer and PC. Does on off switch on top of printer work correctly.

Dec 21, 2007 | Lexmark Z33 InkJet Printer

Not finding what you are looking for?
Lexmark Z33 InkJet Printer Logo

Related Topics:

137 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lexmark Office Equipment & Supplies Experts

Roopesh S
Roopesh S

Level 2 Expert

228 Answers

Sanath Kumar V

Level 3 Expert

684 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18330 Answers

Are you a Lexmark Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...