Question about Washing Machines

1 Answer

My Kenmore washer does not stop filling with water when it is set at the top two settings for larger loads.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,028 Answers

Ck to be sure small hose on water level switch is secure ..does water shut off when timer knob is pushed in?if not suspect fill valve stuck open if it does shut off suspect water level switch no repair just replace

Posted on Oct 25, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Kenmore washer model 1102781269 over fills


Possible that the settings of the water level sensor is too high, you need to short the switch and see if the inlet flow stops. if not there are issues with the main controller unit.
Check this links for tips: controller unit

Nov 20, 2013 | Washing Machines

1 Answer

Kenmore top load washer 29822800 - washer-selector is set on one rinse- when machine starts the agitator starts immediately as water fills - then when machine stops after spin cycle in off position water...


if you are saying that the washer finishes the load of clothes and timer goes to off and water is filling the tub after this then you have a bad water valve on the back of the washer.disconnect the water lines and change out the valve

Aug 14, 2010 | Kenmore 24032\24036 Top Load Washer

1 Answer

Water does not stop filling in washer.


The fill valve may be stuck open if you have to shut the water off with the faucet.
The water height sensor if not functioning, try it at all the different settings first.

Jun 14, 2010 | Kenmore 24032\24036 Top Load Washer

1 Answer

Washer wont agitate or stop filling on any setting


Hello Friend, Just replace the water pressure/level switch. Replacement will make it fill correctly and agitate. Happy to help.

Nov 18, 2009 | Kenmore 24712 Top Load Washer

1 Answer

Kenmore Top Loader


try different temp settings be sure screens in inlet valve end of hoses are clean and taps on all the way if you gave water to washer and still none coming in suspect bad fill valve

Sep 03, 2008 | Kenmore 24032\24036 Top Load Washer

1 Answer

Kenmore 70 Series Top Loan - Fill Cycle won't stop when full


Does the water stop when you push the timer in or are you having to shut the spigots off?? If it stops when the timer is pushed in then you have a problem with the pressure switch. There are quite a few tricks to axcessing your machine's components but if you are handy ill attemt to help.

Jan 12, 2008 | Kenmore 24032\24036 Top Load Washer

Not finding what you are looking for?
Washing Machines Logo

Related Topics:

41 people viewed this question

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8147 Answers

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...