Question about Maytag Neptune MAH6700A Front Load Washer

1 Answer

Dispenser drawer opening on WAH6700AWW

We have a WAH6700AWW front loader and the dispenser drawer keeps sliding open during either the washing cycle or one of the spin cycles. Then the softener does not get desepensed and or there is water on the floor.
Any way I can get the door to stay closed? Maybe a new one? Duct tape?
Thanks Flyer34

Posted by on

  • flyer34 Oct 25, 2008

    Thanks for the help. I had done that earlier and again today, so I will see how it goes.


    Thanks again,
    Flyer34

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 903 Answers

Try take the drawer out and clean the inside where the drawer fits into. It may have a build up of soap/softener etc.. then give the drawer itself a good clean including the bottom of the drawer. I have this problem from time to time where there is a build up of soap etc...

Posted on Oct 25, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How do I remove the top of the washing powder drawer unit for cleaning


I assume its a front loader? If so, the centre of the drawer (when open) has a clip which you push down to release the dispenser. It should slide straight out.

Mar 12, 2015 | Bosch Washing Machines

1 Answer

How do I take the soap dispenser out of the washer to clean it?


u don't say what washer u have on most front loaders there is a tab lever that u see when u open up the drawer all the way. push down on the lever and pull out. it should slide the rest of the way out.

Apr 16, 2014 | Washing Machines

1 Answer

Simpson front loader washer leaking from front soap drawer on the spin and rinse cycle when filling


Disconnect first the mains, power plug off the wall. You could have a clog in your soap drawer; pull the dispenser drawer completely out. There is a tab that needs to be depressed to release the drawer to remove. Clean the soap drawer with an old tooth brush. The usual block could be old soap, softener, etc. (you could also be using too much soap powder). I usually use just above 125ml (my measure cup says ml, I use front loader powder for the 5.5kg load) The wash is very gud. This is the normal issue that will cause water to leak out of the dispenser housing.
Wash the dispenser drawer thoroughly with warm water. Make sure that you pull off the siphon covers and wash all siphon holes. This process is described in your owner's manual. Next could be one of hoses has become loose, should be re-fixed. Examine by removing top of the front loader; this will give you a gud view of the pipes.If helped, click.

Mar 10, 2013 | Washing Machines

1 Answer

My Frigidaire front load washer will not dispense the fabric softner during cycle.


Clean the dispenser drawer if water is introduced into the fabric softener cavity but does not dispense. Pull the dispenser drawer out until it stops and push down the release tab marked "PUSH" and then pull the dispenser out completely.

Lift the dispenser drawer cover and clean the tubes both in the dispenser drawer and the cover.

Turn the drawer over then release the conveyor from the tabs and lift it off. Clean the conveyor and the drawer thoroughly.

Snap the conveyor into the tabs back into position and then reinstall the dispenser cover making sure the tubes are properly seated.

Slide the dispenser drawer back into the drawer opening while pushing down the part marked "PUSH".

Let us know if the fabric softener dispenser still does not dispense while both the detergent and bleach dispensers dispense.

Mar 10, 2010 | Frigidaire ATF6000ES Front Load Washer

1 Answer

Indesit WIE147 leaking from soap dispenser


You could have a clog in the housing underneath the dispenser where the water flows through a hose into the tub.
Pull the dispenser drawer completely out.
There is a tab that needs to be depressed to release the drawer and remove it.
Check the opening at the bottom of the housing just inside the dispenser housing opening to see if a small sock or garment is clogging this opening.
Reach down into this opening to see if an item is inside the hose.
This is the normal issue that will cause water to leak out of the dispenser housing.

http://media.fotki.com/1_p,wbwdbgswgksbgfwxgtqsskgwtqkq,vi/ktfgsrbbdxwtwtqtfwk/1/1303472/5961857/image45924img-or.jpg

Wash the dispenser drawer thoroughly with warm water. Make sure that you pull off the siphon covers and wash all siphon holes. This process is described in your owner's manual. Replace the dispenser drawer and try the washer again.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question

Jun 17, 2009 | Washing Machines

1 Answer

Have a intermittent leak in the soap dispensing area in top left area above the front loader sears kenmore # 417.29052991. looking for service manual to guide me on getting into that area for repairing.


You could have a clog in the housing underneath the dispenser where the water flows through a hose into the tub.
Pull the dispenser drawer completely out.
There is a tab that needs to be depressed to release the drawer and remove it.
Check the opening at the bottom of the housing just inside the dispenser housing opening to see if a small sock or garment is clogging this opening.
Reach down into this opening to see if an item is inside the hose.
This is the normal issue that will cause water to leak out of the dispenser housing.

http://media.fotki.com/1_p,wbwdbgswgksbgfwxgtqsskgwtqkq,vi/ktfgsrbbdxwtwtqtfwk/1/1303472/5961857/image45924img-or.jpg

Wash the dispenser drawer thoroughly with warm water. Make sure that you pull off the siphon covers and wash all siphon holes. This process is described in your owner's manual. Replace the dispenser drawer and try the washer again.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question

Jun 16, 2009 | Kenmore Washing Machines

1 Answer

Automatic bleach dispenser fills up with water during fill cycle


You could have a clog in the housing underneath the dispenser where the water flows through a hose into the tub.
Pull the dispenser drawer completely out.
There is a tab that needs to be depressed to release the drawer and remove it.
Check the opening at the bottom of the housing just inside the dispenser housing opening to see if a small sock or garment is clogging this opening.
Reach down into this opening to see if an item is inside the hose.
This is the normal issue that will cause water to leak out of the dispenser housing.

Wash the dispenser drawer thoroughly with warm water. Make sure that you pull off the siphon covers and wash all siphon holes. This process is described in your owner's manual. Replace the dispenser drawer and try the washer again.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question

May 04, 2009 | Washing Machines

1 Answer

Dispenser drawer


You could have a clog in the housing underneath the dispenser where the water flows through a hose into the tub.
Pull the dispenser drawer completely out.
There is a tab that needs to be depressed to release the drawer and remove it.
Check the opening at the bottom of the housing just inside the dispenser housing opening to see if a small sock or garment is clogging this opening.
Reach down into this opening to see if an item is inside the hose.
This is the normal issue that will cause water to leak out of the dispenser housing.

Wash the dispenser drawer thoroughly with warm water. Make sure that you pull off the siphon covers and wash all siphon holes. This process is described in your owner's manual. Replace the dispenser drawer and try the washer again.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question

Mar 03, 2009 | Kenmore 44102 Front Load Washer

1 Answer

Diepenses fabric softener too early


You could have a clog in the housing underneath the dispenser where the water flows through a hose into the tub.
Pull the dispenser drawer completely out.
There is a tab that needs to be depressed to release the drawer and remove it.
Check the opening at the bottom of the housing just inside the dispenser housing opening to see if a small sock or garment is clogging this opening.
Reach down into this opening to see if an item is inside the hose.
This is the normal issue that will cause water to leak out of the dispenser housing.

Wash the dispenser drawer thoroughly with warm water. Make sure that you pull off the siphon covers and wash all siphon holes. This process is described in your owner's manual. Replace the dispenser drawer and try the washer again.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question

Jan 24, 2009 | Washing Machines

1 Answer

Dispenser issues


pull drawer out towards you, untill it comes to a stop.!push down plastic tab and pull the rest of the way out,some dispensers have to be lifted and pulled at the same time.wash it then with hot water! take apart softener compartment to clean,makeing sure small hole is free!!!close eire

Dec 15, 2007 | Frigidaire GLTF1670A Front Load Washer

Not finding what you are looking for?
Maytag Neptune MAH6700A Front Load Washer Logo

144 people viewed this question

Ask a Question

Usually answered in minutes!

Top Maytag Washing Machines Experts

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Bill Long

Level 3 Expert

587 Answers

John Tripp
John Tripp

Level 3 Expert

4638 Answers

Are you a Maytag Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...