I need instructions for a Malibu 8100-0200-01? these are the only numbers I could find on it.

There's only so many screws that hold the glove box in. Some are inside the glove box and some are underneath. You may need a torx wrench depending on the type of screws holding the glove box in.

Question is not complete:
Add a comment if needed.
You have a malibu product, and want instructions?
Copy following links for instructions, manuals, tips, troubleshoot, installation, replacement trippers, etc.

http://malibu.brinkmann.net/guides_support/do_it_yourself_installation.aspx

http://waterheatertimer.org/Malibu-power-pack-stopped-working.html

If you need further help, I’m available over the phone at https://www.6ya.com/expert/gene_9f0ef4df2f9897e7

Open following links for ML88T resources including power pack manual, replacement trippers, tips, illustrations:
http://waterheatertimer.org/How-to-set-timers.html
http://www.intermatic.com/~/media/files/intermatic/products/instructions/professional%20lighting/ml88t_sp.ashx
http://waterheatertimer.org/Malibu-power-pack-stopped-working.html

Open following links for power pack instructions and tips.
http://waterheatertimer.org/Malibu-power-pack-stopped-working.html
http://www.intermatic.com/products/professional%20lighting/low%20voltage%20landscape%20products/power%20packs.aspx
http://www.intermatic.com/~/media/files/intermatic/products/instructions/professional%20lighting/ml600tw.ashx

You posted under Malibu power pack.
If you have analog dial that rotates as time passes, then setting on-off times is accomplished by using black and red tripper.

Usually the timer comes with 2 red ON trippers and 2 black OFF trippers.
Place trippers on outer edge of dial and then set timer according to instruction manual.

If you need more trippers, they can be ordered
http://waterheatertimer.org/Intermatic-trippers-and-parts.html

Open following link if you need instruction manuals or troubleshoot steps for setting up power pack.
http://waterheatertimer.org/Malibu-power-pack-stopped-working.html

Add a comment with exact model number if you want more detailed instructions, and add your experience so others with same-similar problem can benefit.

Also take advantage of fixya expert assistance live.
For a price, expert works with you while you work on timer or any do-it-yourself project.
Fixya is always less expensive than a service call.

if this is a factory radio, then you can go to dealership, to get unlock code for your radio. i think you may need the vin number.

Here's a link to the routing diagram you need...
http://www.gates.com/common/part_locator/view_diagram.cfm?id=S8015

Most people replace the starter/solenoid assy. because the solenoid is not sold separately. I believe this is you case. Below is a good option.

First disconnect the battery negative(GND) cable. Remove the two bolts which hold the starter to the block. Careful not to let it drop and hit you in the head, Unbolt the small signal wire to the solenoid and then the large red starter cable which goes to the battery +. Installation is reverse procedure.


2002 Chevrolet Malibu - Hi Test Starter Part Number: HITEST6491 Manufacturer Number: 6491 Our Price: $106.80

Core: The “core” is your old part. Send us your old part and the core deposit will be refunded to you upon receipt. Detailed instructions will come with your order. $64.00

I'm pretty sure you can download the manual in its entirety via the link below.
http://www.ebookspdf.com/automotives/3776/chevrolet-malibu-2002-owners-manual/