Question about Canon Office Equipment & Supplies
Error Code E00580-0000
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: E00002-0000 error code
ont. Panel, press the following, one after the other, * (additional functions), 2, 8, * (additional functions). You are now in Service Mode. Touch the Function Tab, touch the Clear button, touch the ERR button, when it is highlighted, press the OK button at the botton of screen. Power Cylce unit. If it comes back up, may have been a fluke. However, if it comes back, check your Fixing Assy for jammed paper, or damage to the Fixing Film (Upper Roller). Replacing the Film is not hard. After you remove the Fixing Assy., its a couple cables and springs. Rather on the easy side for Film replacements. Remebmer, on these models, the Film is also the Heater and Upper Fixing Roller. The Film is most likely on the pricey side for new, believe you can find rebuilds. Just keep in mind that the Film is still a lil' bit cheaper then the whole assy., and 8 out 10 times, its the Film that fails in the asssy
Posted on Mar 23, 2008
Dear sir; This error code means "scannor memory" problem, don't worry, we can reset it, the procedure as follow;
1, make sure you are in copy mode , then press "p", "*", "clear", "*".
2, enter 16 press start.
3, press "CA" to end simulation.
that's easy, if you need more help, just let me know, good luck.
HAVE A HAPPY HOLIDAY !!!
Posted on Dec 20, 2008
November 7, 2002
Product : IR 2200 / 2800 / 3300
Title : E007 code for the IR 2200 / 2800 / 3300
E007 code is occurring for the IR 2200 / 2800 / 3300
In Service mode / Copier / Function / Part Check, energize M4 (the Fixing Drive motor). If the Fixing Drive motor does not come on, replace M4 (part number FH6-1848-000). Canon USA, Inc. Systems & Technical Support Division
you access service mode by pressing ADDITIONAL FUNCTIONS-2-8-ADDITIONAL FUNCTIONS
Posted on Apr 29, 2009
your printer thermostator paper dust or toner dust clean it and solve
Posted on Jun 03, 2009
Tips for a great answer:
Jun 30, 2017 | Office Equipment & Supplies
May 08, 2015 | Heating & Cooling
Jul 02, 2011 | LG WM2301HW Front Load Washer
Apr 30, 2011 | LG WM2016C
Nov 21, 2010 | Kenmore 27032
Jun 15, 2009 | Canon Office Equipment & Supplies
Jun 02, 2009 | Xerox Phaser 8400 Laser Printer
Dec 20, 2008 | Sharp AR-M455N Copier
66 people viewed this question
Usually answered in minutes!