Question about Schiller Cardiovit At 2 Light Ecg Machine

1 Answer

Printing 3 leads only not 12

My Schiller Cardiovt AT 2 light is printing only 3 leads. Is there way to reset from menu to switch to 12 lead mode?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 157 Answers

Hello medico001, The info on the Schiller web site states an option of 12 lead for model Cardivot AT. If your unit has this option only the automatic selection will deliver the 12 lead print. For futher info select the web site http://www.schilleramerica.com and click on 'Contact Us'. This should direct you to someone local. Good luck.

Posted on Nov 04, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

AT2+ doesn't print


HI,
Its a common problem with Schiller ECG machine. The battery of your ECG machine is faulty. Even if you are using the machine in AC it uses the battery power. The AC power is only used for charging the battery.

When the machine starts to print the battery will drop down and the printing will stop. This is happening with the machine. It will eject the first paper without printing. its normal. Because the machine starts printing on a fresh page only. In your case the machine is ejecting the first paper. When the machine starts its printing in the second page it will draw a large amount of current from the battery for its thermal printing head. If the battery is not proper then it will suddenly drop the printing. The square box you see is not printed by your ECG machine. Its already printed in the paper of Schiller. With this mark the Machine sense the page.

Its a 12 volt 2.3 AH battery. You will not be able to replace the battery from out side any where. For replacing the same you have to open the machine by removing the screws on its bottom. Be care full with the paper tray while removing the top cover. Also do not use any force to open the top cover because there are connections on the top cover.
Here i have added a link to the battery for Schiller AT2 PLUS

Battery


Ajin

Apr 27, 2012 | Schiller Welch Allyn Cardiovit At 2...

1 Answer

I change the paper and now machine runs only in manual mode only. I want to run it in auto mode.


Be certain that you have the correct paper in your unit. THe Schiller AT2 uses a black Que mark on the paper to start the Automatic 12 lead. If the device fails to Que, it will never start an auto run, but manual(rhythm) functions will still remain. The part number paper you should be using is 2157-017A.

Sep 19, 2011 | Schiller Welch Allyn Cardiovit At 2...

1 Answer

Do u have a picture on how to put leads on a pt for a Schiller AT-2


HI,
Watch the following picture and video to know about the 12 lead ECG placement.




9_14_2011_8_47_33_am.jpg










OK

Sep 12, 2011 | Schiller Welch Allyn Cardiovit At 2...

1 Answer

I have an at1 schiller it starts to print in auto mode for like 6 seconds and then stops sometime it prints the full report and sometimes it dont can u assist


hi,
You have to check two things. First you have to check the patient cable, and have to check is its electrodes are properly cleanded or not. if any one of the lead or the electrode have some problem then the machine will stop printing.
Second thing the battery inside the machine. its a 12V 2.3AH battery. If availabel try to replace the same. To replace the battery you have to oppen the machine.
ok

Jul 06, 2011 | Schiller Cardiovit At 1 Ecg Machine

1 Answer

Schiller AT-Plus, I cannot get all leads to print in sequence I avr v1 v4 II avl v2 v5 III avf v3 v6 not sure what a student did to change the...


The unit is apparently printing out in Cabarra sequence. To restore the correct lead sequence, do the following: Hit the ALT key followed by 7 then 1, hen the stop key. This will restore standard lead sequencing.
That is the start of the battle. If you desire a 3+1ryth format with a lead 2 at the bottom, which is our standard format, then you have more to do. For this format hit the ALT key followed by 1 then 0 followed by the stop key.to set the ryth lead to lead II at the bottom of the page, hit ALT followed by 3 then 8 then 2 followed by the stop key. If your filters are not enabled hit Alt 5 6 stop, alt 5 8 stop, Alt 8 3 stop, ALT 8 1 stop.Do a test print after all of this and be certain the unit is configured to your taste prior to a live patient.

Jun 14, 2011 | Schiller Welch Allyn Cardiovit At 2...

1 Answer

At-2 lite model not printing visibly patient data and interpretation also have blurred upper part of EKG print. All leads are printed well. Is this setup problem or malfunction?


hi,
check the paper you have inserted. if the paper quality is bad then the printing can become bad. Use schiller original paper.

if again printing is bad then the thermal printing head of you machine is faulty or the. you have to replace the same.
ok

Apr 10, 2011 | Schiller Cardiovit At 2 Light Ecg Machine

1 Answer

How does ECG machine find that signals are good for printing (in auto mode)? some ECG machines take up to 20 second time for printing start


hi,
When the at2 is in auto mode, first of all it check the leads are properly connected or not.Then it will acquire the ECG and store the same in its memory then only it starts printing. that's why it takes that much time to give a printout. When its starts printing you can remove the connections from the patient because it have already memorized the ECG.
If interpretation is in on position it will compare the acquired ecg with the standards in its memory (allready programed by the manufacturer). and will give a detailed report with ecg.
ok

Feb 04, 2011 | Schiller Welch Allyn Cardiovit At 2...

2 Answers

Won't give print out on Automatic but will give on manual


Turn off the machine & then turn on after 10 seconds. than press ALT 1 1 0 STOP in a sequence. That will solve your problem for printing in AUTOMATIC Mode

Jun 10, 2009 | Schiller Welch Allyn Cardiovit At 2...

1 Answer

SCHILLER AT 2 EKG ISN"T PRINTING ON AUTO PRINT I NEED TO KNOW HOW TO RESET IT. I'M LOOKING FOR A MANUAL.


my machine now printed 2 paper in auto print mode, i want this print one paper .Can you help me solve this problem?
hoanghung_hoanghung24@yahoo.com

Apr 07, 2009 | RTO Schiller AT-2i Electrocardiograph -...

1 Answer

I ahve a schiller welch allen EKG machine, and now it only prints


If it stops printing completely in the middle of doing the print, it is because the battery is bad and needs to be replaced.
If it only prints some of the leads but it does print the full report it is because you have the leads mixed up (Wrong spot on the patient) or the leads are mislabeled or some of the clips or electrodes are bad.
I can fix these. Let me know if you need help.

Apr 05, 2009 | Schiller Welch Allyn Cardiovit At 2...

Not finding what you are looking for?
Schiller Cardiovit At 2 Light Ecg Machine Logo

Related Topics:

225 people viewed this question

Ask a Question

Usually answered in minutes!

Top Schiller Medical Experts

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

The Knight
The Knight

Level 3 Expert

73474 Answers

Are you a Schiller Medical Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...