Question about Belling 24 in. IDW603 Built-in Dishwasher

1 Answer

Cutlery going rusty

I have had my dishwasher for 2 years, just recently I have noticed that my cutlery is spotted with rust after the washing cycle . Any ideas.

Posted by on

  • Stupotran Oct 25, 2008

    I don't think it is the Quality of the cutlery , Got this as a wedding present 25 year's ago never had a problem with my previous dishwasher of 15 years? I purchased good quality carving set 18 month ago the dishwasher has the same efeect (rust spots) ?

  • krakow Nov 23, 2008

    I am also having the same rust problem with my cutlery...and it certainly is not the quality of my cutlery. It's driving me crazy. Any solution, Please?

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 27 Answers

2 solutions here. Firstly your cutlery is of poor quality - sorry!! Or try using more rinse aid, but I suspect the quality of the cutlery

Posted on Oct 25, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Wash cycle not completed


Lights 1 and 3 indicate that the filters are blocked.
Check water flows through the spray arms onto the cutlery - indicated by wet cutlery.
If dry - recirculation pump is probably blocked

Apr 06, 2014 | Hotpoint 23 in. BFI62 Built-in Dishwasher

1 Answer

My Electrolux ESI602 dishwasher has just started leaving rust spots on all my cutlery & a white residue on the inside of the dishwasher (like limescale). Any idea what the problem is ?


This is a something i see all the time always use the better dishwasher soap it cost a little more but in the long run it works better, also use less soap then what they say to use , so it will cost you less !

Dec 02, 2011 | Electrolux 23 in. ESI602X Built-in...

1 Answer

Dishes have a film on them after washing and the cutlery is getting rusty spots all over them


Hi,

The scum, film and white residueproblems have started since the reductionof phosphates in dishwasher detergents.

Here is a tip that will help you to solve the problem of films, residue, and scum in your dishwasher.

DishwasherResidue and Film on Dishes

heatman101

Apr 20, 2011 | Dishwashers

1 Answer

Any thing stainless which gets washed in my dishwasher comes out with rusty spots


Check the items are dishwasher proof, not just the items that are becoming tarnished but other items, main culprits ar cheese graters and garlic presses as these are not suitable for the d/w and will cause deposits on the other items.
There are 4 main reasons
1.Stainless items are left in a damp d/w with salt or acidic food residue.
2.Items are peft for long periods of time in a damp d/w after cycle has finished
3. undissolved powder (particularly if using quick wash) has come into contact with the cutlery.
4. different types of metal have come into contact with each other.
Hope this helps.

Jul 06, 2010 | Dishwashers

1 Answer

Hello. My dishwasher has been pretty perfect for four years. When my house water softener ran out of salt, I added rinse aid and salt to the dishwasher for the first time. I subsequently added salt to the...


Try cleaning the machine by adding white vinegar to the wash water (before the water-fill procedure finishes). Put your stained dishes and cutlery in with the wash to remove the hard water deposits. The combination of salt and rinse aid may have helped cause this problem. Hope this helps!

Feb 11, 2010 | Dishwashers

1 Answer

Hi, We have a small CDI454-80 Candy Dishwasher. It is just 18 months old and has only been used around twenty to thirty times. It has recently started to leave a film on all the dishes after the wash is...


The problem is hard water. Go to www.dishwasherfilter.com. They have a new product out that solves this problem once and for all. It filters the water entering your dishwasher and removes the hard minerals that cause these spots. Very affordable and guaranteed to leave your dishes looking amazing every time.

Dec 07, 2009 | Candy A8001 Dishwasher

1 Answer

Not coming out clean


I'm guessing from your post that your cutlery is the only thing in the dishwasher that is not getting clean, but rather with that nasty coating when you go to empty it. The reason for this phenomenon doesn't lie in a problem with the dishwasher, but rather a simple chemical and physical reaction between the dishwashing liquid (or powder or tablet), heat from the dishwasher's dryer, and the metal on that set of cutlery. The bleach from the dishwashing detergent will work very hard at getting your glasses, bowls, and everything glass and/or plastic clean and sparkling because it contains bleach in its ever-proprietary mixture of citrussy goodness. Unfortunately, metals and bleach, combined with heat are NOT a good combination! The best advice I can give you in this case (again, assuming that everything else in your dishwasher is looking fabulous and that your cutlery is the only thing that is not) is to wash your cutlery by hand with regular dish soap in the sink and do not put them in the dishwasher. Of course, it's easier to just stick all of that stuff in the dishwasher and not wash it by hand! It's why you bought a dishwasher in the first place, right? But if you want your cutlery (especially if it's GOOD cutlery) to look good and perform well, your best bet is to wash it the good ol' fashioned way...In the sink.

I hope this helps! :) Let me know if you need anything else that I can help with.

Sep 21, 2009 | Dishwashers

1 Answer

S/s cutlery comes out with rust spots, why?


Only two possible reasons. In order of likelyhood:

1. Cheap Cutlery.
a) There are various types/grades of 'stainless' steel, some of which simply are not.
b) May be just lightly coated/plated steel

2. Excessive iron in your water, which would be showing up in your toilet tanks more than anywhere else. In which case, you need a softener with a chemical feed to address the iron and/or a dedicated iron filter.

Aug 08, 2009 | Dishwashers

1 Answer

Loud Knocking/Ticking Sound During Cycle


have you lowered the top basket into the lower position? if so the spray arm will knock the cutlery /plates. it sounds as though it is a spray arm problem. remove them and put it in wash to see if the noise goes. if not there may be an obstruction in the wash pump, this is a stripdown job then.

Jun 04, 2007 | KitchenAid KUDC02IRB Dishwasher

Not finding what you are looking for?
Belling 24 in. IDW603 Built-in Dishwasher Logo

Related Topics:

370 people viewed this question

Ask a Question

Usually answered in minutes!

Top Belling Dishwashers Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Mike Cairns
Mike Cairns

Level 3 Expert

3053 Answers

mike cooper

Level 3 Expert

864 Answers

Are you a Belling Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...