Question about Danco Faucet Stem

Open Question

9b-3h hot stem - Danco Faucet Stem

Posted by Anonymous on

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 67 Answers

SOURCE: I bought a Danco 3H-10H/C, Hot/Cold stem. The

One of two things has happened. I'm assuming you only get hot water when you open the valve and that this is for a single handle control shower fixture. If so either this is the wrong valve for your shower control or it is installed backwards. Sometimes the valve can be installed at either 180 degree angles. See if it can be installed any other way. If so this may solve the problem.

Posted on Jul 19, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The projector worked for about maximum 100 hours... maximum 3h long each time...and now it turns off...saying lamp is too hot...IS IT POSSIBLE THAT A LAMP BURNT OUT SO QUICKLY?


Check the cooling fan first to see if it is clogged with dust. If a lamp gets too hot it does shorten the life of the bulb significantly.

Apr 20, 2016 | Sony VPL-DX140 Projector VPL-DX140

1 Answer

Hot to adjust a price pfister 3H-10H/C faucet


If I understand your question, it could be as simple as switching the supply lines.

Aug 10, 2014 | Price Pfister Plumbing

1 Answer

Faucet still running


Change the O rings in the mixer.

Mar 10, 2014 | Danco Faucet Stem

1 Answer

How do i install tub/shower remodeling kit 9B-3H/C


while the wall is open is the time to replace the plumbing it's cheaper to do it know then in a few weeks when its all closed in $100 now or $500 later

Oct 14, 2012 | Price Pfister Verve Tub & Shower...

3 Answers

I bought a 3h-10h/c but it only works for hot. do you have the same product for the cold side?


The same part works for both Hot & Cold sides. Usually preset to work on Hot (counter clockwise on, clockwise off). To set for Cold, simple remove the plastic clip from the top, slide the ring tab off, flip it over and put back on (you can only put it on one way since there's a flat "key" in it matching the stem) Now its set for Cold (CCW of, CW on). HTH

Aug 05, 2010 | Danco Faucet Stem

1 Answer

I bought a Danco 3H-10H/C, Hot/Cold stem. The problem is, it seems to be setup for hot (clockwise closes the valve, counter clockwise closes it). Is it reversable? Or is it not really a hot/cold...


One of two things has happened. I'm assuming you only get hot water when you open the valve and that this is for a single handle control shower fixture. If so either this is the wrong valve for your shower control or it is installed backwards. Sometimes the valve can be installed at either 180 degree angles. See if it can be installed any other way. If so this may solve the problem.

Jul 18, 2010 | Danco Faucet Stem

1 Answer

Replaced stems and still leaking...


Hello Matg55,

If the seat came out with the stem, you will need to reinstall it.
The valve's disc needs a seat to seal properly.
Is the seat threaded on the side opposite the bevel?
Do you have a seat removal/Installation tool?

Kind Regards,
IT_handyman

Oct 20, 2008 | American Standard Bath Faucet Ceramix...

2 Answers

Replacing stems on old hot and cold shower valves


Some times the seat gets worn anout of round. there is a tool you can buy called a faucet reamer or reseating tool. this shoul help thanks

Oct 12, 2008 | American Standard Plumbing

1 Answer

Sharp AL-1631 has 3H error code


3H error means overheating...what you can do is supply new fans or clean the unit for dust and others. check for the exhaust fans if its still working. this will reslove your problem.

hope this helps

Jan 27, 2008 | Sharp AL 1631 Copier

Not finding what you are looking for?
Danco Faucet Stem  Logo

Related Topics:

21 people viewed this question

Ask a Question

Usually answered in minutes!

Top Danco Home Experts

Donni Steen

Level 3 Expert

659 Answers

Andrew Bugbee

Level 2 Expert

210 Answers

richie46

Level 3 Expert

8071 Answers

Are you a Danco Home Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...