- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Dial your own number, when the voicemail picks up, dial either the * key or the # key. Then follow the instructions for setup that they give you. There should be an option for notification settings within the voicemail system.
each beep means a new voice mail...so 6 beeps should indicate that you have 6 new voice messages :D
just dial your voice mail and check them and it will stop!!!!! :D
GOOD LUCK AND PLEASE RATE THIS POST!!!!!!!!
Panasonic KX-TG1050N Cordless Phone. Base handset (No. 1, KX-TGA100N) does not work, no keypad response or dial tone. Green indicator message light ON (should only work with the TG1000N base unit) all the time till battery runs down. Display shows message ?C533?. Can still send and receive calls on extension phones 2 and 3.
YOUR batteries are bad and not giving full current to phone.Clean charging contact and see battery gets full charge. IFthe battery indicator will show full charge due to voltage but once if you remove battery and put it again indicator will be minimum. then replace batttery.
It took me a while to figure out but here is how I am able to dial out from skype to a hardline to a person not in my skype contact. Simply start to dial the number (not from the talk button!!!) then instead of hitting the talk button to dial, hit the skype button on the bottom left hand side. I also have to dial 001 then the phone number. Hope this works for you too. good luck.
If you subscribe to call answer service with your phone company, a mail indicator might coincide with a stuttering dial tone, to indicate a message waiting. If on the Bell Canada network, dial *98 to check your voicemail. Once all new messages have been listened to, the dial tone will stop stuttering, and the indicator will hopefully follow suit.