I bought from a site in internet a PIONEER AVH-P4000DVD. In my country (Greece) the dvd players use region 2 but this one is play in region 1 (for USA).
I wonder if i can change the region number to my unit from 1to 2?
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
there is a reset button on the left of the cd player. u will need a needle to hit the button. once u hit it, the screen will still say caution but when you touch the screen it will go back to your regular settings
ground the wire to a hot (ie power comes to the wire) switch in your dash, like a rear window defroster or seat heater. turn the switch on then off and it will trick the system into thinking you activated the parking brake.
It is telling you that, depending on the rear-view camera that is attached, the image MAY appear reversed. If the unit is going into this screen on it's own, go to the main menu screen where you would choose DVD, RADIO, AUX, etc... and press Rear View. It should beep (but not change). That is it.
You probably need to get the handbrake switch wire properly attached to the handbrake switch. Some people have also used a toggle switch or something and run the handbrake switch wire to that and the wire from the handbrake switch to a ground on the vehicle, then you just have to flick the switch off and on EVERYTIME you start the car to do the bypass.
Though what I'd really suggest just getting a 4 pin relay and do a bypass. You can also use a 5 pin relay and do it, just don't use the 87a pin. Another clean way to do it would be getting a PTR 7 but this costs a bit more and needs to be programmed. This should allow you to look at DVD's with vehicle moving or not.