Question about Intel NetportExpress PRO/100 Print Server

1 Answer

I have inadvertantly reset my Intel Netportexpress 10/100 print server and need to assign a IP address to it but cannot get intel wenm software to work on my XP operationg system. How can I assign an

I have searched for help on Intel site but only seems to go up to win 98 & 2000. I am actually going to use it finally to connect to my mac as a server for an epson 9000 large format printer. The software people for the Large format software 'Shiraz' have told me that I must assign an IP address then change the Mac address to the same range before connecting to the mac.

Posted by on

  • Chris Buckingham Feb 14, 2012

    Tried to use the web interface but doesnt appear to work with XP?

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Intel Master
  • 75,117 Answers

Please contact product support for this server.

Posted on Feb 13, 2012

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Jetdirect ex default ip


Usually it it set to pick up IP from DHCP/BootP.
If someone had assigned a fixed IP and it is now unknown. It is better to reset the print server to factory default by pushing the little reset button,
Then check you DHCP server for the newly assigned IP address.

You will need a version of HP Jetadmin or HP webjetadmin to configure this print server

May 13, 2014 | HP JetDirect EX Plus Print Server

2 Answers

IAM GETTING AN EXPLAIMATORY MARK IN MY LAN CONNECTION IT'S SHOWING AS LIMITED OR NO CONNECTIVITY


your pc is not assigned with a reliable IP by your switch. Right click on that "icon" in your system tray and click "Repair".

Regards!

Jul 07, 2009 | Intel D101GGC Motherboard

1 Answer

The segement of the print server you select is different from your computer" on Vista,


Meaning that the IP Address of the print server is different from the computer's IP Address.

If you're computer has a static IP Address, you need to assign a static IP Address for your Print Server. To assign a static IP for the print server, you need to open the PSAdmin utility on your computer, locate the TCP/IP and click the plus (+) sign. Double-click the IP Address and you may change it from there.

Make sure that the IP Address of your computer, router and print server are in the same IP range. And make sure that you could ping the IP of the print server.

Then configure the printer port settings and you should be able to print.

Have a great day!

Jul 03, 2009 | IOGear GPSU21 Print Server

1 Answer

I cannot conect with the default ip for the WGPS606 netgeat print server!?


Check the IP address of your computer and see if it's on the same range of the IP address of the printer server.

Ex. print server IP: 192.168.1.4
Your computer must have 192.168.1.XXX

Note: X can be any no. from 1 to 254

To assign an IP address on your computer:

Start > Control Panel > Network connection

Go to the properties of the local area connection then click on TCP/IP tab.

You can now assign an IP address on your computer with the same range of the print server.

Jun 27, 2009 | NetGear WGPS606 (WGPS606NAR) Print Server

2 Answers

Setting up my D-Link DP-301P+ print server


Print servers are typically controlled through a web interface, and do not need specific drivers. You can download the manual and installation guides here. You may need to change the default IP address; look at the section on Networking Basics in the manual.

Jan 11, 2009 | D-Link DP-301P+ Fast Ethernet Print Server...

1 Answer

Cannot connect to AXIS 5600 print server


A Dlink's default IP range is 192.168.0.x, it would therefore hand out a address in that range. Since the router reports an IP of 10.43.14.125 I believe that it has been assigned a static IP Address. This is the manual.
https://www.axis.com/files/manuals/28049.pdf
You need to temporarily assign your computer an IP of 10.43.14.1
follow the instructions here
How to Assign Static IP Address in Windows 7 8 10 XP or Vista
Log into the printer server's webpage by opening your browser and going to 10.43.14.125
Turn on DHCP, save settings, reboot
Undo the changes you made to your computer. Reboot

Mar 06, 2017 | IBM AXIS 5600 (12r1361) Print Server

1 Answer

Intel Mother board


I have obtained the information you require and will forward to you if you can give me your address
Terry

Aug 04, 2008 | Intel NetportExpress Print Server...

1 Answer

I have a brother printer, Model Number HL-2700cn, serial no u60767M4S142278. I just bought a lap top and wireless broadband router. In order to connect the printer to my wireless lap top I need the IP...


The Automatic Private IP Addressing (APIPA) protocol
automatically assigns an IP address from the range:
169.254.1.0 to 169.254.254.255. If the APIPA protocol is
disabled, the default IP address of a Brother print server is
192.0.0.192. To change it, use the printer control panel (if
applicable), the BRAdmin Professional, Web BRAdmin software
or let your DHCP server allocate an IP address to the printer.
2 Refer to chapter 10 of this User’s Guide to learn how to
configure the IP address on your printer.
3 The default password for Brother print servers is access.
4 Windows® 2000/XP users can print using TCP/IP using the
standard Network Printing software and IPP protocol software
built into any Windows® 2000/XP installation.if you need manual just email me at repagenserv@saipan.com or romeo_palencia@hotmail.com

Mar 27, 2008 | Computers & Internet

3 Answers

DP-303


Perhaps the XP firewall software is preventing PS Admin from connecting to the print server?

Jan 16, 2008 | D-Link DP 303 (DP-303) Print Server

Not finding what you are looking for?
Intel NetportExpress PRO/100 Print Server Logo

305 people viewed this question

Ask a Question

Usually answered in minutes!

Top Intel Computers & Internet Experts

Tony

Level 3 Expert

2600 Answers

David
David

Level 3 Expert

778 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Are you an Intel Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...