I need screws and bolts for mothercare playbead cot are these available?

Question turned around for clarity. 'Make model (what it is)' in that order and first please.

Didn't I answer this earlier today? I gave information how to find the parts. Here it is. It tells you to contact them and details how on page 1 top left. A good big box store like Home Depot or Sainsbury's Home Base carry parts like this in the hardware fixing aisle.

Ascot_Cot_Mothercare.pdf

mothercare.gr https://www.mothercare.gr > imported > manuals PDF If you have a problem with this product or require replacement parts, please contact your nearest Mothercare store or telephone the Mothercare customer care.

https://www.google.com/search?q=mothercare+ascot+cot+replacement+parts

..

Contact Mothercare direct and they should be able to get a full set. Or if you go to B&Q or Sainsbury Homebase, you should be able to pick up fasteners that will fit.

All the parts as listed on Page 4 of the manual with the number you need. The problem part might be Part 'J'.

https://www.mothercare.gr/sites/default/files/imported/manuals/Taunton_Cot_Bed_Mothercare.pdf

More

https://www.google.com/search?q=Mothercare+Taunton+cot+bed+WD246SH+parts

..

Take one of the same bolts from the kit with you to the hardware store. They will match it perfectly for you.

No! And this is a critical component. I hate to tell you but you should throw the drop side away. You can use as a toddler bed or headboard and footboard to a twin, but it is unsafe as a crib and this is a prime example of why drop sides were banned.

Disengaging the 'drop-side' is the tricky part.
You'd need a size 4 allen key. Assembly instructions will help you locate the screws: http://help.mothercare.com/resources/mothercare/products/Ashton_Cot_Dropside_UPDATE
Before you begin removing screws, you must first disengage the lower part of the 'drop-side'.
At a point midway between the "High" and "Low" postions - the lower side should be pulled outwards (towards yourself). Now lower the 'drop-side' - to release free. It would have been nice if they had marked this position on a visible edge.
Proceed to removing screws in the reverse order of assembly.

• Here is a link to the manual for a Mothercare Cot/Bed

http://help.mothercare.com/resources/mothercare/products/Bordeaux_cotbed_instructions

• This will provide you will the illustrations necessary to make this change as well.

Regards, Tony

One of my drop-side catches for my Jasmine mamas&papas cot have broken and M&P customer care have told me they dont have spares.Can anyone advise me please desperate mum to be in 3wks.

Just ring the mothercare customer service help line and they will order them for you free of charge - you do not need your receipt.

if you can tell me the diameter and lent of the bolts and screws i can forward them on to you for free

Have attached a copy of my instructions

Tracy Weaver