Philips lcd tv model 14pf6826 - menu does not offer installation option as described in manual.

Usually some other buttons take place of the scroll buttons.
You didn't include a model number but you can probably find a user manual here.
Philips Cineos Flat TV 37PFL9632D 94 cm 37 LCD integrated digital with...

http://www.p4c.philips.com/cgi-bin/cpindex.pl?ctn=37PFL9632D/10&hlt=Link_UserManuals&mid=Link_UserManuals&scy=GB&slg=ENG

If you're trying to scan for channels, this option should be found in your menu. I am not sure what your menu looks like, but usually there is a "Channels" setting in your menu. You can then select "Start Scan" or "Scan for Channels." You might also look for anywhere that says "Initial Setup" or somewhere in the menu that says "Add/Remove Channel." For some reason, Philips does not allow you to look this model up on their website. If you can't figure out the menu you should try calling Philips customer support.
LCD Television (2008 and newer)
1-866-771-4018
Televisions (purchased before 2008)
1-866-310-0787

Philips have all the manuals on line.
http://www.support.philips.com/support/catalog/products.jsp;jsessionid=196EC4DB23F142B6EFE2D6E05CF806E2.app107-drp1?_dyncharset=UTF-8&country=&categoryid=LCD_TV_SU_GB_CARE&userLanguage=en&navCount=2&groupId=SOUND_AND_VISION_GR_GB_CARE&catalogType=&navAction=push&userCountry=gb&title=LCD+TV&cateId=TV_CA_GB_CARE

copy and paste link if it does not jump to it.

The buzzing sound comes from transformers on the PSU. The transformers can be sealed using a sealant spray which dries and hardens. You can also check your picture settings in the menu, if there is a "vivid" option, pick it and your buzzing will not be heard.

Go to the Sony website. Models printed in black can be fixed, those in red like my KD-32dx40 are un-fixable.
Call 0845 6000 124 for their story.

for the plasma tv, go to the menu and try to find some options about the HDMI on the menu or go through the user manual you will definitely find some solutions. or try to change the HDMI cables.

Sorry... gave you info for the wrong model number... here is the correct info. Hope this helps!

Being a hotel TV this model has more options. Not knowing how you have it set up my best suggeston is to download the users manual by clicking below.

http://www.p4c.philips.com/files/3/37hfl5560d_27/37hfl5560d_27_dfu_aen.pdf

Check the firmware on the set and if is is not BX23U-1.5.0.0_03531 go to www.usasupport.com to down load the currect version. That should fix the problem. If it does not your small signal board need to be replace.

If you have a remote that can access menu and your remote has number buttons and an enter key, you can follow this instructions to go to installer menu. Note that the installer menu is slightly different for each model, eg. some options are not available.

I was able to go to installer menu using two universal remotes. The remotes that I used were Dish Network 3.0IR and RCA RCU300WBL. Both remotes programmed for Zenith H2531DT TV. The reason why I had to use two remotes is that Dish Network remote was only able to access menu. It did not have ENTER key but RCA remote had ENTER key but I wasn't able to go to menu with that.

To go to installer menu (different from regular menu):

- Hold MENU for 8 seconds.
- Press 9, 8, 7, 6 and ENTER in the sequence.
You should be in the installer menu now. There should be a line that looks something like this:
03 VERT POS 13

Use SELECT button to scroll through each option, and ADJ button to adjust the values for each option. For example, to enable the front panel buttons on your tv, set KEY DEFEAT to 0. Other options that you might want to check:

CHAN LOCK which locks your TV to a single channel and wont let you change (set 0 to turn off)
START CH/VOL will set your tv to a specified channel when you turn on tv. (set 255 to disable)


You will have to look in the menu for some of the options because they are different for different TV series. A good place to find manual is on www.zenith.com or http://safemanuals.com/

I work in an old hotel and it took me few hours to figure out how to disable start channel lock. It drove me nuts. I hope someone finds this useful.

why did it get the highest raiting?? it doesent even say a solution