Question about Singer Sewing Machines
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: singer overlocker
Most likely is the left looper thread is trapping the needle threads.
Remove the threads and start over in this sequence....
Left looper - right looper - left needle - right needle.
If you thread the needles before the lower looper, the needle thread wrapped over the looper will be under the looper thread and will never be free to form a stitch, so the threading sequence is critical.
Posted on Jun 08, 2008
All sergers thread the same way and sergers have to be threaded in a certain order. I made a jingle out of it...
It would be best to have a tweezers handy to help with the thread and threading.
always be sure the lower looper thread goes over the top of the upper looper then out the back. I would be surprised if your thread guides are not color coded.
If you look at the top thread guides or the spools. First from left to right thread the 3rd spool, then the fourth spool. Then you thread the right needle (the second spool) then the left needle (1st spool.
The lower looper can be tricky because you have to thread it from the back of the looper to the front.
Pull the threads out the back from under the foot. Then go ahead and run it slow watching to see if it starts making a chain. It should. If not do it over again.
Posted on Aug 03, 2009
Here is a link to Singer,however it doesn't seem very helpful.I saw a couple of your problem under the FAQ section.On my wife's machine which was a Brother,you could adjust the bobbin tension by sliding a plate on the bobbin metal jacket/casing where the thread ends up coming out.The hole/slot size could be adjusted and required very little movement and may not have a wide range of motion.Play with it and see if you can get it to do that or look and see what you find.I do not really know how to describe it but I was always doing the maintenance on it and she showed me stuff like that.Here is the link.If you do not get anything out of either,just comment back to this post and I will get an auto link.Good luck! Greg cms...Are you in Canada or Europe or something?
Posted on Sep 01, 2010
Tips for a great answer:
Jan 18, 2016 | Singer Sewing Machines
Nov 05, 2013 | Singer Sewing Machines
Jun 17, 2012 | Sewing Machines
Jan 18, 2012 | Singer Sewing Machines
Jun 03, 2011 | Singer Electronic Sewing Machine
Mar 25, 2009 | Yamata FY14U4AD
Jul 31, 2008 | Singer Featherweight 140Q
102 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: