Question about PC Game Controllers

3 Answers

Joy stick twin shock is detected but does not vibrate

Posted by on

3 Answers

  • Level 1:

    An expert who has achieved level 1.

    Governor:

    An expert whose answer got voted for 20 times.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 2 Answers
  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 25 Answers

You need to install the USB Vibration driver should have been on a cd inside the package.

it installs into a directory called
c:\windows\USB Vibration\7906\

AppName=USB Vibration Joystick

or it might be called

Device Name: PC TWIN SHOCK
Attached: 1
Controller ID: 0x1
Vendor/Product ID: 0x0079, 0x0006
FF Driver: C:\Windows\USB Vibration\7906\EZFRD64.DLL

Posted on Jan 12, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

So why aint you give the helping thing -->>share that your file tmaster26 ! :D

Posted on Aug 11, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I noticed that every time I buy new PS2 Dual Shock 2 it only last for 3 months because I play to much almost everyday then when I try to open the black wire of the dual shock the colored wires some...


Hi, This is happen because : 1. You may bought a non original controller. 2. You may always engage the vibration function. Sony dual stick controller ( analog stick) has fine cables inside controller. The imitation ones even smaller. While you use the vibration function for long time, it make some cables apart.
Suggestion :- Use only original dual stick controller ( analog stick). Don't engage vibration function for long time - I believe you can reconnect the wires inside controller ( so just fix it yourself) and play..

Dec 01, 2010 | Sony PS2 Dual Shock 2 Controller...

2 Answers

I'm looking for the L3 on the controller. I have


Hi a lot pf people get confused over this button but you know the two thumb controls that you can turn in all directions the round controls well you can press these down the left ball is L3 and the right ball is R3 so press the ball down and thats the button your looking for.

Jul 10, 2010 | Sony PS2 Dual Shock 2 Controller...

8 Answers

I have a Twin USB Vibration Gamepad i need the driver for Windows 7


there is no driver for windows 7 as sitek (the chinese manufacturer of the device that sells it as in "white box license" for others to print its logo on discontinued such a device since 2005. Mind you sitek.com itself has vanished and a new firm has taken over that address.
Thus end of story , problem on relaying on a small time manufacturor , however i do have the xp drivers and they do work , windows 7 would not accept them and insists that the generic driver it uses is up to date (which works fine except the vibration a.k.a force-feed-back wont work)
I am working on a new uproach on injecting the xp driver into windows 7 registry and if it works i'll let you know :)

Mar 05, 2010 | Genius G-12U Vibration, USB, PC gamepad....

1 Answer

Bought attack 3 joy stick -won't do anything


Try unpluging stick from pc,And changing port where its plugged into.

Next try unpluging stick and reboot pc,once pc is started,plug joystick back in.


Thanks and good luck

Jan 12, 2010 | Logitech Attack 3 Joystick

1 Answer

No vibration in controller


you have to seperately install the ******** driver which is provided with the joy stick..install that driver...it'll vibrate

Jul 05, 2009 | Sony PS2 Dual Shock 2 Controller...

1 Answer

Right analog stick not working


Check the controls on the game's control section. If you play another game that uses the right analog control and it works on that game then it's the control set up for FIFA. Make sure that the analog control light is on when the game boots up. Sometimes if the analog control light is not on when you turn the game on and you turn it on afterwards, the analog stick controls don't work properly. That happened to me on NFS Pro Street. If this helped you leave feedback please. FIXYA!

Feb 19, 2009 | Sony PS2 Dual Shock 2 Controller...

1 Answer

My joystick is detected but vibration is not working.. Twin shock Joystick..


Hello, you need to also install the software for the joystick, the drivers build in to windows doesnt include vibration.

Nov 26, 2008 | Logitech Attack 3 Joystick

1 Answer

Right joystick


I don't personally know of anywhere that will replace the stick. If it truly is broken as you say, you will need to purchase another one. After all, it is broken.

Nov 11, 2008 | Microsoft MS Xbox 360 Common Controller...

3 Answers

Find me the driver for my joy stick: HCL double vibration controller


go to leadership.com.br
search for 1022
download hcl gamepad drivers

Apr 19, 2008 | PC Game Controllers

Not finding what you are looking for?
PC Game Controllers Logo

Related Topics:

4,532 people viewed this question

Ask a Question

Usually answered in minutes!

Top PC Game Controllers Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18297 Answers

steve morris
steve morris

Level 3 Expert

1673 Answers

yadayada
yadayada

Level 3 Expert

60769 Answers

Are you a PC Game Controller Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...