Question about Whirlpool AWOE8748 Front Load Washer

Open Question

Whirlpool AWOE 9549 f13 - Whirlpool AWOE8748 Front Load Washer

Posted by Anonymous on

Ad

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
blueextc3221
  • 15935 Answers

SOURCE: My Whirlpool AWOE 8748 washing

The F30 error code will flash when the dispenser motor cannot be driven to its proper position.

* It could have a mechanical failure in the linkage between the dispenser motor and the top of the dispenser.
* Loose wire connection between the machine control board and the dispenser motor
* Failed dispenser motor

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question

Posted on Sep 28, 2010

Ad
  • 2 Answers

SOURCE: It is an awoe 8558. the spanner symbol is flahing

Hi, I have exactly the same problem. Did you ever get a solution to get the door open manually?

Posted on Nov 01, 2010

Daniel S
  • 4323 Answers

SOURCE: stopped halfway through a wash,

Hi

F13 is a door lock circuit failure, first check if the dispenser motor is able to move to its proper position. If it is working fine then check the door lock circuit....usually this error is caused due to failed door lock circuit, you can also try to hit the right of the door area with your hand to check if this works, if it won't then the door lock assembly should be replaced. Hope this helps...please post back for further assistance.

Daniel

Posted on Dec 25, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Errore f02 modello awoe 8104


open the bottom tray door on front panel 3 screws on bottom front.
clean out the trap

May 10, 2014 | Whirlpool Washing Machines

1 Answer

Whirlpool awoe 8548


The f13 is a door lock error. You will need to replace the door lock mechanism, could also be the wiring or connections for the lock itself so check that first. Cheap part and easy to replace.

Jul 08, 2013 | Washing Machines

1 Answer

Whirlpool Awoe 1012 bearing


Check this link for spares and tips to replace: bearing replacement

Jul 05, 2012 | Whirlpool Washing Machines

1 Answer

Whirlpool awoe 8761


Is it always loud or just when it is a full load. If the load is unbalanced it will be loud. Most F/L washers today have some kind of unbalanced load detection, but they are not all that great. If it spins quietly when empty it is just an unbalanced load. Don't over load and don't mix rugs with clothes, pillows, etc...

May 19, 2012 | Whirlpool Washing Machines

1 Answer

I have a whirlpool 6th sense washing machine with a warning light coming up and F13 on it.This machine is only 6 months old


f13 is a problem with the door lock, I have the same machine and it takes 4 minutes for the door latch to open and if it dont in the 4 minutes F13 comes up and the machine will go off and not start again.

Sep 30, 2010 | Washing Machines

1 Answer

My Whirlpool AWOE 8748 washing machine was showing error message F13. I swithced it off via the plug but the door will not open. Tried to switch it on again but no lights come on why?


The F30 error code will flash when the dispenser motor cannot be driven to its proper position.

* It could have a mechanical failure in the linkage between the dispenser motor and the top of the dispenser.
* Loose wire connection between the machine control board and the dispenser motor
* Failed dispenser motor

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question

Sep 04, 2010 | Whirlpool AWOE8748 Front Load Washer

2 Answers

My whirlpool washing machine keeps saying f13 whats wrong and how do i fix it


Hello, the F13 means "Dispenser Circuit Error", if the dispenser motor is not able to be driven to its proper position.
Check the following:
1. Check mechanical linkage from dispenser motor to the top of the dispenser.
2. Check wire harness connection to the dispenser motor and Central Control Unit and lastly
3. Check dispenser motor.
Thanks

Jun 10, 2010 | Whirlpool Duet GHW9150P Front Load Washer

1 Answer

It is an awoe 8558. the spanner symbol is flahing


Hi, I have exactly the same problem. Did you ever get a solution to get the door open manually?

Apr 01, 2010 | Whirlpool Washing Machines

Not finding what you are looking for?
Whirlpool AWOE8748 Front Load Washer Logo

Related Topics:

49 people viewed this question

Ask a Question

Usually answered in minutes!

Top Whirlpool Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

Sal DeAngelo

Level 3 Expert

2328 Answers

yadayada
yadayada

Level 3 Expert

76846 Answers

Are you a Whirlpool Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...