Question about Elite Sl 3000 Ul Sliding Gate Operator

2 Answers

I have an Elite gate operator. I had several friends over for a visit and they all arrived at the same time. Three cars lined up at the entrance gate and the first car punched in the gate code. The gate opened allowing the first car, then the second car to safely enter the property. As the third car passed through the gate following the second car, the gate began closing striking the side of the third car causing some damage. Please advise what you think the problem might be. We have recently repaved the driveway with approximately two inches of new asphalt, would this interfere with the magnetic loop sensor not being able to pick up the cars coming in as they passed over the loop????

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 8 Answers

You need to put safety beams in if you have your auto close function enabled on your gate motor. If you had the safety beams installed your gate wouldn't have closed on the 3rd car. The loop you have installed is only really for cars leaving your premises without you having to open the gate or them entering a code to open from the inside

Posted on Jan 29, 2013

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 430 Answers
Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Repairman can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Repairman (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What time check-in Friday 01 September 2017 NZ7735 operated by Virgin Australia VA807


Melbourne to Sydney, so 2 to 3 hours before departure. 04:30 should be good at that ungodly time of day..

Melbourne · Mon, August 28 Sydney · Mon, August 28 Scheduled departure Terminal Gate Scheduled arrival Terminal Gate 6:30 am 3 - 7:55 am 2 32

va807 status Google Search

Aug 27, 2017 | Time Computers & Internet

1 Answer

My elite operator will only close part way, seems to only happen cold nights 52 degrees-F works well in the day time no matter the temperature, limit switches checks out ok, I disconnected the loop...


You will have to increase your force (sensitivity) settings on the p.c. board. Without knowing what type of board you have I can only guess. There should be a pod you can rotate with a screwdriver to increase the force. If it has an LCD readout with menus search the menus for force or obstruction, then increase it.
freddy51

Feb 08, 2010 | Elite Sl 3000 Ul Sliding Gate Operator

2 Answers

The outgoing gate has a positive stop on it, but


Well it seems that their could be a limit switch problem. also if someone has replaced the limit switch they could have not connected the wires back up correctly. if your wiring and switch are correct than you have a bad circuit board. my opinion is to not even fix it and replace the whole opener with a gto-pto gp sl50 They are the most reliable opener out so far and come with all the features that elite charges extra for like a battery backup for instance.

Oct 24, 2009 | Elite Sl 3000 Ul Sliding Gate Operator

1 Answer

Lost keys to security gates living in a mews


If this is a shared entrance - you need to contact the main keyholder - maybe a grounds management company. Most systems like this operate under a restricted profile key system. New keys are only issued against signatures.

If it is just your own property - Provide proof of this to a registered locksmith for them to change locks.

Jan 07, 2009 | Kwikset Professional Door Lock...

1 Answer

Holiday Programming


the elite does not have that function, your are going to need to look for a time clock that holds open your gate...... the outside phone system or a programmable time clock that has been added to your gate...... oh this is an old post sorry. :)

Dec 19, 2008 | Elite Sl 3000 Ul Sliding Gate Operator

3 Answers

Sliding gate will not close


The photo eye sensor is defective of is out of its correct posistion!
Hope this was of help!

Dec 11, 2008 | Elite Sl 3000 Ul Sliding Gate Operator

Not finding what you are looking for?
Elite Sl 3000 Ul Sliding Gate Operator Logo

Related Topics:

283 people viewed this question

Ask a Question

Usually answered in minutes!

Top Elite Home Security Experts

ray gallant

Level 3 Expert

48532 Answers

Pierre Legault

Level 3 Expert

381 Answers

Tom Chichester

Level 3 Expert

39358 Answers

Are you an Elite Home Security Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...