Question about PC Desktops

1 Answer

I cannot charge my laaptop due to the fact that the port connecting to the cable does not work anymore due to a fall. where can i fix it in london? and how much money will it take me?

Posted by on

  • 1 more comment 
  • nohap Oct 24, 2008

    Hi, thank you!! I tried with another charger but is not working, the port seemed to be relaxed a bit, and computer was working well with the remained battery after the fall. I did not tried with another battry but i am pretty sure it is the port.the model is ACER aspire 3004

  • nohap Oct 24, 2008

    thank you, but it is in northern ireland

    Do you know by any chance sth in london?

  • nohap Oct 24, 2008

    sorry dont have yahoo, but anyway thank you for your help,i needed south london better,


1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert who has answered 20 questions.


    An expert that hasĀ over 10 points.


    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 47 Answers

I will be happy to help u with this problem but before we start can u yell that did u try another changer or try another battery. and wat make and model of ur laptop r u using so i can guide u to a service centre and how much money it will require.

Posted on Oct 24, 2008

  • 2 more comments 
  • pushpdeep singh
    pushpdeep singh Oct 24, 2008

    well ill get back to u as soon as i get the info and where do u need the service centre the location plz.

  • pushpdeep singh
    pushpdeep singh Oct 24, 2008

    Northern Ireland & Republic of Ireland
    AE Technology Ltd.
    70-72 Scarva Street
    Northern Ireland
    BT32 3AD

    Telephone Number: 0870 803 4915 (UK)
    (048) 40669640 (RoI)

    this is the best possible answer if u want to get ur laptop repaired and it will be costing u around 120to150 pounds.

  • pushpdeep singh
    pushpdeep singh Oct 24, 2008

    do u mean south london and here is my email add me up if u have uyahoo is hard to help here have to wait long for reply

  • pushpdeep singh
    pushpdeep singh Oct 24, 2008

    sure u can long on to the website and get all the help u need


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Can not hook up to my Toshiba TV what cord do i need in order to make it work

Since this model of All-In-One Computer already has a built-in Digital/Analogue Television Function, as part of its standard specification, I will assume that your reason for wanting to interconnect these two devices is that you want to export computer, internet or other IT-based multimedia images to the TV for an enhanced viewing experience due to the TV's larger screen size.

The All-in-one computer has a High Definition Multimedia Interface (HDMI) Port.

If the TV also has an HDMI port, what would be required is the best quality HDMI Cable that the User can afford.

All electrical/electronic interconnections between cables and ports suffer some degree of degradation or dissipation of the signal traveling along the cable. The most efficient metal for electronic connections is gold due to its comparatively high level of electrical conductivity compared to that of other metals used for electronic interconnections.

The best cable choice would therefore be a gold-plated HDMI Cable (see below).

If the TV has no HDMI port, an HDMI to Video Graphics Array VGA Cable Adapter or ([Victor] Radio Corporation of America - the inventors) RCA/PhonoVideo Cable Adapter between the HDMI Cable leading from the computer and the corresponding VGA or RCA/PhonoVideo port on the TV should resolve the connectivity mismatch (see images below).

Once connected, the TV Remote Control should be used to change the Signal Source Input from its automatic standard (Default) setting to PC Input:

Menu -> Source -> PC -> OK.




Nov 25, 2011 | Acer AZ5700-U4002 23-Inch All-In-One...

1 Answer

Printer/computer connection cable

My e-Machine has a printer port on it. If yours does not then you will need to try and locate a Serial to USB converter. I have not seen these but I am sure someplace has them. With the cost of Printers today, I would just by a $39 printer from Walmart and use that. Due to ink cost it is cheaper just to purchase a new printer instead of buying ink now days this will fall into the same category. If you can get a connection box to connect that printer to a network you could do that and access it through a router which would be another option.

Nov 20, 2011 | E-Machines PC Desktops

1 Answer

My printer won't print due to the fact that the troubleshoot says I'm not connected to a computer....but I am. How do I download a new driver to make it work. thanx

Hello Sir, Hi, that is common error with printers today, but this error can be fixed, here are some of the thing you need to do, they may help.
for usb interface. 1. If you are using a USB interface, you need to install first the driver software, along the setup, you will be prompted to power on the printer and plug in the USB cable to your computer and the printer. make your connection here. If the connection fails, do this several times. 2. If the 1. fails try using another USB port.
for centronics parallel printer cable. 1. Make the connection of the printer to the computer before installing the driver software. 2. Power on the printer. 3. Power on the computer and install the driver CD.
If you do not have the driver cd and you did not mention what printer you have. do a Google search, type the printer make and model and search for the driver. download the driver, usually from the manufacturer's website.

Oct 17, 2010 | PC Desktops

1 Answer

I have a cash management system Royal alpha

I find that a lot of serial to usb or parallel to usb converters do not work due to the fact you can't get bidirectional communication. In every case I have dealt with, the resolution was a dedicated port card to physically install a parallel or serial port in the system.

Dec 07, 2009 | PC Desktops

3 Answers

I show on monitor "no signal" Check Signal Cable

Check that the "data" cable between your computer and your monitor is tightly connected at each end.

Connect the VGA-output port from a laptop computer to the monitor, to see if the monitor works when connected to a different computer.

Connect a different monitor to the VGA-output port on your computer, to see if that monitor works.

Failing all the above, the video-card on your computer is the problem, and needs to be replaced.

Nov 05, 2009 | E-Machines (T3104) PC Desktop

1 Answer

No Power

i had this problem to maybe a couple months ago, the problem is either your charger is dead. or the connection of your charging port has got moved around.and its not being charged anymore.

Dec 16, 2008 | PC Desktops

1 Answer

I have a 1g Lexar usb key it doesn't work. My computer doesn't reconise it plus the light on the key doesn't flash anymore... pls help as i have my good photo's on it

It could be your USB port that's not working. Try inserting your flash drive into a different USB port. It is possible that the line connecting the USB port was accidentally removed or loosened inside your CPU. You can also try opening your CPU and fix the connections of the front panel wires to the motheboard.

Sep 23, 2008 | PC Desktops

8 Answers

Computer wont turn on

"Then I came across the recommendation to check the USB ports for damage. Saw some of the pins bent inside the port. Once I fixed them, the computer powered back on as normal! Small fix for big problem. Cheers - Parveen"

My wife's Dell E510 also suffered from the orange blinking light on front, and would not power up this morning. I had just purchased a new power supply for another computer and swapped it with the Dell's. To no avail... Put the Dell back together and still no luck with a start. So I came across your site and remembered that recently the 6y'o had jammed a USB port in the front of the Dell and after bending that USB port back into shape every thing works again!

Who would have thought that a free fix would be so easy!


Feb 09, 2008 | Dell Dimension 5150 (DIM515MIN) PC Desktop

1 Answer


Physically unplug the power to the printer, wait 1 minute plug back in. Wait for the printer to come to ready
Try again.

If this does not work, check all connections and move the usb cable to a different port on your computer.

If all this does not work, you can uninstall and reinstall the printer drivers as a last resort.

If this falls, you might have to replace the unit.

Jan 11, 2008 | PC Desktops

3 Answers

Speakers not working.................

Check the following,
  • Speakers, connecting cables and Sound Card are working fine by connecting to another computer.
  • Speaker Cable is connected to an audio port (Audio/Video port in system box).
  • Volume is MUTE / Low (in Volume Controller).
  • Audio drivers have installed.
To Check follow the Steps:
• Go to Start>
• Control panel>
• Double click on "System" Icon> (it shows the System Properties Window)
• Select “Hardware” Tab>
• Select “Device Manager” Tab> (it shows the Device Manager Window)
• Select “Sound, video and game controllers”>
• Expand “+” symbol> (check the audio Codecs, Legacy Audio Drivers and others are not in Questioned Mark (?) symbol with yellow color. If there need to install the drivers ).
  • If not, insert the motherboad CD, browse>select audio driver>install. After completion, restart computer and check.

Sep 21, 2007 | PC Desktops

Not finding what you are looking for?
PC Desktops Logo

Related Topics:

39 people viewed this question

Ask a Question

Usually answered in minutes!

Top PC Desktops Experts


Level 3 Expert

5660 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18297 Answers

Are you a PC Desktop Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides