Question about RCA 4-in-1 Universal Remote Control
The brand of my tv is not listed
Try this.. turn on your tv. Press the and hold the TV button till it blinks, then press the search button, do not hold it down.. Press it and keep pressing it till the tv goes off. Once it does. Push the TV button again and then the POWER button. TV should come on.. Good Luck
Posted on Nov 11, 2008
Tips for a great answer:
Dec 10, 2015 | RCA Remote Controls
Dec 04, 2015 | RCA Remote Controls
Oct 30, 2015 | RCA Remote Controls
Nov 19, 2014 | RCA Remote Controls
Mar 26, 2014 | RCA Remote Controls
Apr 29, 2013 | Remote Controls
Apr 17, 2013 | Remote Controls
Apr 17, 2013 | RCA Universal Remote Control
In order for the 3 component universal remote to control
your TV, you must program it with the TV code that matches
your TV. These instructions explain the preferred method of
programming the remote-the Direct Entry method.
1* Manually turn on the TV.
2* Locate the enclosed TV Code List.
Find your brand of TV.
3* Press and release the TV key. The
indicator light blinks and then remains lit
4* Use the number keys to enter
the first code listed for your brand.
After you enter a valid three-digit
code, the indicator light turns off.
Note: If you enter an invalid code,
the LED will flash rapidly for 2
seconds. Start over at step 3.
5* Aim the remote at your TV and press
the ON•OFF key. If your TV turns
off, you have found the correct code
6* Enter the code in the box provided
on this page for future reference
7* If your TV doesn't turn off, repeat
steps 3-6 above, entering the next
code for your brand.
Jul 05, 2011 | RCA 3-Device Universal Remote with...
267 people viewed this question
Usually answered in minutes!