Question about Excalibur Phantom Force Electronic Chess Set

Open Question

MT01R error message and idle - Excalibur Phantom Force Electronic Chess Set

Posted by Anonymous on

Ad

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 1 Answer

SOURCE: Error Message MT01R

Fiddle around with the mechanism lock on the bottom. Once it engages properly, it will work. I had exactly the same problem.

Posted on Apr 26, 2009

Ad
  • 1 Answer

SOURCE: Error Message MT01R

In my case the solution was to remove all but 4 of the screws on the backside, which holds the
two halves together. And then back off the remaining 4 screws so it only holds the two halves
together loosely.

I had this same error after roughly 50 to 100 games. But the mechanism would run fine when I
opened the unit up. I also noticed that it was held together so tightly, that the magnet that moves
across the board was etching a pattern into the metal plate that it contacted.

Giving the motor just a little more room was all that was needed. I've had no problems since
then.

Posted on Apr 30, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Help. have starimaster 4600cl getting "config rqrd" error


Display reads CONFIG RQRD or NTM CONFIG RQD on Stairmaster Equipment Probable Cause The message CONFIG RQRD or NTM CONFIG RQD appears when the console needs to be configured for the machine type it is installed. This message is common when the console has been replaced or if the settings have been changed. Message is commonly seen on various Stairmaster equipment such as bike models 3000CE, 3300CE, 3400CE, 3600RC, 3800RC and 3900RC; stepper models 4400PT, 4600PT, 4400CL, 4600CL and SC916; stepmill models 7000PT and SM916; elliptical model ClubStride 5100.
Corrective Action
  • Make sure the unit is in an "idle" state. "Idle" state means the console is not displaying an error or any message that requires data input. The display should basically be freshly powered up, scrolling the EKG or welcome message
  • Configure the console for the proper machine type by pressing Level UP, 80, ENTER
  • Using the Level UP or Level DOWN keys, scroll through to the proper machine type (Bike, Elliptical, Stairclimber or Stepmill)
  • Once the proper machine type is shown on the display select the machine type by pressing ENTER
  • This completes the steps necessary when your Stairmaster display reads CONFIG RQRD or NTM CONFIG RQD

Stairmaster Console Message CONFIG RQRD or NTM CONFIG RQD

Nov 23, 2013 | Stairmaster 4600 Cl Cordless Freeclimber

1 Answer

Printer fimware error


MESSAGE IS BEING DISPLAYED ON ACTUAL PRINTER 'STATUS SCREEN' BOX, NOT ON THE COMPUTER SCREEN.
ANOTHER ANSWER: It can be a communication issue from a network/computer or a hardware/connection problem. When does the error come up, i.e. when sending a print job or when printer is booting up or sitting idle? Get the exact error message. You can also contact Lexmark technical support(under warranty) or your local authorized service provider for professional assistance. Thanks.

Jul 29, 2011 | Computers & Internet

1 Answer

The message "head open " printer idle v53.16.5z


Try taking the printer off pause. It should clear the error.

Mar 03, 2011 | Zebra ZM400 Thermal Label Printer -...

1 Answer

Error code 1 - reconfig message


Display reads CONFIG RQRD or NTM CONFIG RQD on Stairmaster Equipment Probable Cause The message CONFIG RQRD or NTM CONFIG RQD appears when the console needs to be configured for the machine type it is installed. This message is common when the console has been replaced or if the settings have been changed. Message is commonly seen on various Stairmaster equipment such as bike models 3000CE, 3300CE, 3400CE, 3600RC, 3800RC and 3900RC; stepper models 4400PT, 4600PT, 4400CL, 4600CL and SC916; stepmill models 7000PT and SM916; elliptical model ClubStride 5100.
Corrective Action
  • Make sure the unit is in an "idle" state. "Idle" state means the console is not displaying an error or any message that requires data input. The display should basically be freshly powered up, scrolling the EKG or welcome message
  • Configure the console for the proper machine type by pressing Level UP, 80, ENTER
  • Using the Level UP or Level DOWN keys, scroll through to the proper machine type (Bike, Elliptical, Stairclimber or Stepmill)
  • Once the proper machine type is shown on the display select the machine type by pressing ENTER
  • This completes the steps necessary when your Stairmaster display reads CONFIG RQRD or NTM CONFIG RQD
Stairmaster Console Message CONFIG RQRD or NTM CONFIG RQD

Feb 08, 2011 | Stairmaster 4400CL Stepper

1 Answer

Error message: Config Required. How do I perform this procedure? Thanks, Dennis.


Display reads CONFIG RQRD or NTM CONFIG RQD on Stairmaster Equipment Probable Cause The message CONFIG RQRD or NTM CONFIG RQD appears when the console needs to be configured for the machine type it is installed. This message is common when the console has been replaced or if the settings have been changed. Message is commonly seen on various Stairmaster equipment such as bike models 3000CE, 3300CE, 3400CE, 3600RC, 3800RC and 3900RC; stepper models 4400PT, 4600PT, 4400CL, 4600CL and SC916; stepmill models 7000PT and SM916; elliptical model ClubStride 5100.
Corrective Action
  • Make sure the unit is in an "idle" state. "Idle" state means the console is not displaying an error or any message that requires data input. The display should basically be freshly powered up, scrolling the EKG or welcome message
  • Configure the console for the proper machine type by pressing Level UP, 80, ENTER
  • Using the Level UP or Level DOWN keys, scroll through to the proper machine type (Bike, Elliptical, Stairclimber or Stepmill)
  • Once the proper machine type is shown on the display select the machine type by pressing ENTER
  • This completes the steps necessary when your Stairmaster display reads CONFIG RQRD or NTM CONFIG RQD
Stairmaster Console Message CONFIG RQRD or NTM CONFIG RQD

Dec 30, 2010 | Stairmaster 4400CL Stepper

1 Answer

Error Messag CONFIG REQUIRED. How do I configure?


Display reads CONFIG RQRD or NTM CONFIG RQD on Stairmaster Equipment Probable Cause The message CONFIG RQRD or NTM CONFIG RQD appears when the console needs to be configured for the machine type it is installed. This message is common when the console has been replaced or if the settings have been changed. Message is commonly seen on various Stairmaster equipment such as bike models 3000CE, 3300CE, 3400CE, 3600RC, 3800RC and 3900RC; stepper models 4400PT, 4600PT, 4400CL, 4600CL and SC916; stepmill models 7000PT and SM916; elliptical model ClubStride 5100.
Corrective Action
  • Make sure the unit is in an "idle" state. "Idle" state means the console is not displaying an error or any message that requires data input. The display should basically be freshly powered up, scrolling the EKG or welcome message
  • Configure the console for the proper machine type by pressing Level UP, 80, ENTER
  • Using the Level UP or Level DOWN keys, scroll through to the proper machine type (Bike, Elliptical, Stairclimber or Stepmill)
  • Once the proper machine type is shown on the display select the machine type by pressing ENTER
  • This completes the steps necessary when your Stairmaster display reads CONFIG RQRD or NTM CONFIG RQD
Stairmaster Console Message CONFIG RQRD or NTM CONFIG RQD

Dec 30, 2010 | Stairmaster 4400CL Stepper

1 Answer

Receiving error message "config. RQRD", what does it mean and how do you fix it?


Display reads CONFIG RQRD or NTM CONFIG RQD on Stairmaster Equipment Probable Cause The message CONFIG RQRD or NTM CONFIG RQD appears when the console needs to be configured for the machine type it is installed. This message is common when the console has been replaced or if the settings have been changed. Message is commonly seen on various Stairmaster equipment such as bike models 3000CE, 3300CE, 3400CE, 3600RC, 3800RC and 3900RC; stepper models 4400PT, 4600PT, 4400CL, 4600CL and SC916; stepmill models 7000PT and SM916; elliptical model ClubStride 5100.
Corrective Action
  • Make sure the unit is in an "idle" state. "Idle" state means the console is not displaying an error or any message that requires data input. The display should basically be freshly powered up, scrolling the EKG or welcome message
  • Configure the console for the proper machine type by pressing Level UP, 80, ENTER
  • Using the Level UP or Level DOWN keys, scroll through to the proper machine type (Bike, Elliptical, Stairclimber or Stepmill)
  • Once the proper machine type is shown on the display select the machine type by pressing ENTER
  • This completes the steps necessary when your Stairmaster display reads CONFIG RQRD or NTM CONFIG RQD

Stairmaster Console Message CONFIG RQRD or NTM CONFIG RQD

Sep 01, 2010 | Stairmaster 4600 Cl Cordless Freeclimber

1 Answer

Error message stats 'pull out trays clear jam, close cover A. but can't find any paper in machine and cover a is closed


a very usual problem steve. try removing power to the printer and let it stay idle without power for abt 20-30 minutes and then try again.this should clear the error message from the memory.

Feb 04, 2010 | OKI B6200 Laser Printer

1 Answer

Retreiving sent email message due to ''UnknownError'' Message


the answer lies in your question.. "it took over one hour to compose".. this make it possible for browser and mail account to stay in some what idle position. so next time first have compose mail in document and send message by coping to specified content and have fine...

if you have "drafts" concept, try to initialize while starting message and then your mail will proceed for auto draft with out error, so there would be no loss of message also.. have fine...

Dec 11, 2009 | Computers & Internet

2 Answers

Error Message MT01R


Fiddle around with the mechanism lock on the bottom. Once it engages properly, it will work. I had exactly the same problem.

Dec 27, 2008 | Excalibur Phantom Force Electronic Chess...

Not finding what you are looking for?
Excalibur Phantom Force Electronic Chess Set Logo

Related Topics:

104 people viewed this question

Ask a Question

Usually answered in minutes!

Top Excalibur Games Experts

Lesley Cameron
Lesley Cameron

Level 3 Expert

371 Answers

kakima

Level 3 Expert

102366 Answers

Are you an Excalibur Game Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...