Question about Sharp AQUOS LC-32D44U 32 in. LCD TV
I bought a keyin rm-133e universal remote control but i lost the users guide. i have to reset the remote control because i changed the batteries. i lost the users' guide and i don't remember the 3-digit code
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: Programming the Acquos Remote
Input code 0093 into your Comcast remote. Here's a link for the how to: http://www.comcast.com/MediaLibrary/1/2/CM/VanityURL/documents/comcast_dvr_remote_manual.pdf
Posted on Mar 01, 2009
On this unit if you do a fact reset it should fix this problem steps as follows. PS you might need 2 people
1- unplug unit from back of unit
2- on the key pad on the tv hold the input and vol dowm buttons
3- while holding the buttons plug the tv in, keep holding the buttons until the screen comes up.
4- once the screen is up there should be a white K in a blue or green box.
5- next, on the key pad on the tv press the channel and vol down buttons once.
6- a menu should pop up
7- using the sharp remote,locate the directional pad
8- press the down button once should bring you to a 2nd page
9- top should state FACT INIT press the right arrow once to turn on, next a series of back slashes come up.
10- screen goes green and says INIT Successful
11- unplug unit from back of tv wait 10 sec then plug back in. tv should turn on by itself. should be back to as new.
If you get to step 7 and the remote still does not work then you need to replace the ir sensor board (aka) LED unit per Sharp.
if needed here is the orignal part info DUNTKE868FM01 about $12.00+ tax
Posted on Mar 18, 2009
Have you tried reprogramming the Dish remote with the Sharp code? That might bring back the TV control. Another option is to use the TV's control panel menu button (if available), go to the setup choices and have the TV scan for channels while the Dish receiver is on. It will find channel 3 then, and probably nothing else, so the set will stay on that channel.
Posted on Mar 20, 2009
Tips for a great answer:
Aug 28, 2014 | Televison & Video
Jun 09, 2014 | Jensen JER-422 Universal Remote Control
May 14, 2012 | Televison & Video
Feb 12, 2012 | Televison & Video
Sep 06, 2011 | Universal Remote Control Remote Control
Feb 28, 2011 | Universal Remote Control Remote Control
754 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: