Question about Microsoft Office Outlook 2003 for PC

1 Answer

Retared People whom want help with no real description of the problem

If you wnat help, help yourself and describe what happen when it happen where it happend? include model numbers, sys information all this is helpful information for a speedy recovery??? ?

Posted by on

  • noreply Oct 25, 2008

    hey tard i-spy-4 good eye with the incorrect spelling of want, please tear me down from this "high and mighty" throne. this is a legit resonable request... it is fuxtard people like your self who make helping people diffcult...


  • laxman_jelly Nov 26, 2008

    i want wirte with formula of numarical to words can you explain of this formula in Excell

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Are you illiterate? Maybe you just have difficulty expressing yourself properly. People who post flames and whine with poor grammar immediately lose the right to act "high and mighty." Spell-check is your friend.

Posted on Oct 24, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Sound goes up and down - when its at a low point I can here a voice describing the actors movements as though it were a description for the blind - can this be deactivated?


Look in your TV menu for a 'Descriptive Video' feature, and disable that feature.
Does this happen on all video or specific input? (ie. DVD, Cable TV, BlueRay, etc.)

Dec 17, 2014 | Televison & Video

Tip

Asking Questions on Fixya


When asking questions on any site it is best to be descriptive as possible. It will get you answers faster and it will make people want to answer quicker, seeing as to how they don't need to squeeze important troubleshooting information out of you. If any one reads this tip you will begin to notice the very short 3 word questions that infect this site are rarely looked at much less answered... Though surely real issues or problems or questions could have been answered if the questioner had of gave a little more detail. Sometimes completely unrelated things are going to have some affect on the issue at hand. So remember give detail when asking questions be descriptive if you can't describe it attach a screenshot or image and ask what you what to know about it how to fix a certain portion of it. Anyone that enjoys answering peoples questions and helping them will also surely agree... It would help us help you if we got more information from the beginning.

on Apr 23, 2014 | Microsoft Computers & Internet

1 Answer

Can the clicking be repaired do-it-yourself with having to purchase parts or can it be bypassed?


What clicking. I don't hear it. Many things can make that type of sound so I need more I to. Like when does it do it, does somethingelse you do cause it? Ect. Be as descriptive of what happens for why and when it occurs. Even if it sound stupid let me know, like, only leaving the drive through at lock burger joint. It may help. It may not. Then you'll have to take it to the best mechanic you can find. I am master certified mechanic .. Blah blah blah, and have only met a couple real mechanics in my life so good luck.

Jun 28, 2014 | Cars & Trucks

1 Answer

My 92 Nissan NX2000 coupe won't go into gear, it pops out and now it just grinds...what could be wrong?


Its not fluid levels and it is not syncro's. Its a defective 5th gear. Sorry to say man but it's shot. This is not an easy fix or a cheap one (unless you are doing it yourself). Looking at $400 just in parts. I had this happen to me. I have done a ton of research and found comprehensive information that has educated me on this common problem in these transmissions. What has happened is the teeth on the 5th gear have worn down to a point that it will no longer allow it to catch and stay in gear. Anytime it is put under any kind of load it will just pop out. Why does this happen to countless Nissan NX and Sentra owners? Faulty engine and transmission mounts. So it is also recommended to replace all 4 mounts in your car when doing this fix. Here is a Web address that will take you to a forum that will describe the problem, what parts need to be replaced, where you can buy them and how to replace them if you chose to do that. You will save yourself about $600 in labor. If you don't choose to not do it yourself you will at least be able to give the mechanic a detailed description of what is going on and how to fix it. Here is the web address. Good luck. http://www.sr20-forum.com/general-maintenance/18390-how-recognise-repair-5th-gear-pop-out-b13-b14-transmission.html

Aug 10, 2012 | 1992 Nissan NX

1 Answer

I JUST BOUGHT ALL NEW CARTRIDGES AND THE LEFT SIDE OF THE PAGE PRINTS REAL LIGHT. THE RIGHT SIDE IS FINE. I HAVE CLEANED THE SYSTEM WITH AIR.


The developer blades in your imaging unit needs to be cleaned. You can fix it by replacing the imaging unit for $100+ or you can clean them yourself. I have a link describing how you can do this.
http://www.fixya.com/support/r4120906-clean_developer_blades_samsung_clp_300 Hope this helps you.

Oct 29, 2010 | Samsung CLP 300 Laser Printer

1 Answer

It jerks real heard nd cuts off


Going to need more of a driveability description,than it jerks.

When,what speed,what rpm, up hill, under a load,what gear you in,etc.

Unplug EGR Valve,plug vacuum hoses,and road test,see if issues goes away,if it does after a couple trips,replace valve yourself.

Sep 21, 2010 | 2004 Lincoln LS

2 Answers

My LG LSC27910TT refrigerator stopped working suddenly


Hi, It's either the start device on the compressor or you have a bad compressor. You'll have to pull it away from the wall and take the bottom back panel off to check the compressor. It will likely be real hot to the touch from what you described happening. If there is a little white colored box on the left side take that off and remove the wires, etc. and shake it... if it rattles and debris falls out then that's the problem. It's fairly common and they make a kit to replace it with a better designed part that's real easy to install yourself. If your compressor has a label on it with a blue indian head symbol, then you're out of luck as that brand pretty much sucks and is destroyed by heat. It would mean a new compressor and then you'd be lucky if the new one even worked from the factory. Avoid those Tecumseh compressors at all cost.

Jul 19, 2010 | LG LSC27910TT (265 cu ft) Side by Side...

1 Answer

Backfiring like it is running lowing on gas but still have plenty of gas.


this to me just reading this sounds like a timing issue at idle you miss it's retared tomuch or advanced a bit under throlle your ok so setting maybe just lit out what sort of miles o4 im geussing 10k prob neededs a pro service done hope this helps

Jul 05, 2009 | 2004 Yamaha V Star Classic

1 Answer

Tire shop says tire wear is due to bad rear struts


you need to replace only the shock cartridges.  Also have the tires rebalanced.
When you receive advice from this website you have to understand that without the item in front of us, we are only able to provide "a best guess" as to what the problem might be based on you description of the defect.  If you haven't described a clear and precise description of the defect you decrease the chances of an accurate reply.  Thank you. 

Apr 29, 2009 | 2004 Chevrolet Impala

Not finding what you are looking for?
Microsoft Office Outlook 2003 for PC Logo

Related Topics:

38 people viewed this question

Ask a Question

Usually answered in minutes!

Top Microsoft Computers & Internet Experts

micky dee

Level 3 Expert

2644 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18381 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Are you a Microsoft Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...