HP Color LaserJet 2600n Printer Logo
Posted on Oct 24, 2008

Page is printed but fade

I have problem with my HP Colorlaserjet 2550L, it prints okay, but splits in the middles, the left side of the page is fading out so the image is half and is not complete and the right side is printing in full color.

  • Skyri Oct 26, 2008

    Yeah these a just new toner catridges and I dont know how to do and alignment and I never cleaned it, because these a just second sets of toners to be use by this printer. we have used it like 6 months ago when its brand new after the toners run out, the print is not used until just a few a weeks ago when we replaced the toners that the problem happens, when printing say a full page picture the page is printed in half and the left side image is fading in to the centre of the page and only the right side is print in full color...

  • Anonymous May 11, 2010

    are these new cartridges?
    Have you tried an alignment?
    have u tried a cleaning?





×

1 Answer

Anonymous

Level 1:

An expert who has achieved level 1.

  • Contributor 4 Answers
  • Posted on Oct 28, 2008
Anonymous
Contributor
Level 1:

An expert who has achieved level 1.

Joined: Oct 28, 2008
Answers
4
Questions
0
Helped
1101
Points
4

The toner cartridge is faulty. It is possible that when you pulled out the strip that the whole thing didn't come out. Return the cartridge (with a couple of printed sheets to demonstrate printing) and the receipt and you should get a replacement.

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Ricoh 3224 Prints have fading in the middle of the page?

Verify the OPC drum and the polygon motor scanner glass,something is dirty.
0helpful
1answer

Only prints on one side of paper. print starts to fade to nothing from right to left

Print the "supplies status" page.
Replace any cartridges that are low, Replace the imaging drum if it is low or empty.
1helpful
1answer

Color is offset and blurred. There is no problem printing in black. Printing test page shows the same symptoms.

Hello
The color of HP LJ 2600n fades due to following reasons
1. the color cartridge near to empty 2. due to dust on reflection mirrors inside the printer
if the color cartridges are OK, then you need help of HP technician support, because cleaning of mirrors is very technical in nature for 2600n.
Dusty Environments can lead to Laser Scanner Contamination. The dust layer on the mirrors prevents proper transmission of the laser output in the imaging system leading to faded colors on the printed page. The initial stages of this failure typically occur in the magenta or yellow color planes as faded or light color. Often the left side is more faded than the middle.
You may need to contact the nearest Authorized Service Tech and get teh Laser Scanner replaced with the new released service part that has a mirror in a location where the dust ideally cannot reach easily.
Also, please ensure that the printer is relocated from the current location to a more dust free zone.
Hope this helps, if so do rate the solution

0helpful
1answer

Faded print on both sides.

The scanner assembly is dirty. Remove all the toner and blow with blower or cold air dryer, in the gaps at the back of the printer. If it still printers faded then the printer must be stripped and the scanner taken out and serviced. (About 1.5 hours work by expierenced technician)


Good luck
1helpful
1answer

HP 2840 will not print on 3 inches of left side of page

Take the toner cartridge out, shake it back and forth, and turn it around in a circle a few time. Put it back in the priter, and print. Order a new toner cartridge.

If this is an inkjet printer, ignore this response.
1helpful
1answer

While printing in black middle of page fades out both sides of the page print well. this is about a 1 inch fade out in middle of page.

Replace the drum of the particlular color cartridges. To know which color you have to print in single color one by one. If problem persist then replace transfer belt .
0helpful
1answer

Print fades out from right side of page

Hello,

Check out this website it will assist you with all the known printing problems out there,

This could be anything from a transfer roller to a defective ink cartridge. However the above link is for troubleshooting print quality problems with your printer

http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&taskId=110&prodSeriesId=239135&prodTypeId=18972&prodSeriesId=239135&objectID=bpl12234


0helpful
1answer

Poor print quality - top half page okay, bottom print faded and skips top half page okay, bottom print faded and skips problem Just installed a new cartridge

check the wright cartridge model you installed and well pluged to the printer

if it is ok

try to change printer properties and fix it correct options with there tabs ( ex: paper, print quality etc)

all are well try to reinstall the printer driver
0helpful
1answer

HP 2550L Printing Problem

check to be sure you tool the strip out and that it's seated correctly
all the way down.
7helpful
3answers

Faded print on one side of page

I have a SCX-4100 Samsung, replaced the tonger cartridge, it was working fine for a few hundred sheets of printing, but after that, the left side of the page was printed very light, faded.
If I run the "Clean Drum", it will print a litter better, but still faded.
What can I do to correct this problem?
Thank you
TT
Not finding what you are looking for?

707 views

Ask a Question

Usually answered in minutes!

Top HP Office Equipment & Supplies Experts

Cindy Wells

Level 3 Expert

6688 Answers

k24674

Level 3 Expert

8093 Answers

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

Are you a HP Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...