Question about Philips DECT 2151 Cordless Phone

Open Question

Philip P100-A Screen Phone

I am looking to purchase a new Philips P100 telephone for my office. The information on the back of the phone is; FCC ID #GAU-P100, a Listed Screen Phone number of E148394 3187. I have searched the internet until I am now see phones everywhere. I have contacted Philips phone numbers 800-284-2428, 800-925-4747, 888-744-5477 as well 800-233-8413. I just want this same phone or one with simular features. PLEASE,PLEASE,PLEASE HELP

mscapable1@yahoo.com

Posted by on

5 Suggested Answers

SOURCE: Philips CD240 cordless phone

need manual for philips cordless phone CD 240

thank you
degs

Posted on Aug 29, 2008

richa33
  • 71 Answers

SOURCE: Philips CD125 Twin Cordless Phone "Searching" problem

Maybe, RF amplifier chip die or antenna broken.

Posted on Jan 21, 2009

  • 6 Answers

SOURCE: need pin number for the cordless phone

By default, the Master PIN is 0000. http://www.p4c.philips.com/files/c/cd2452b_05/cd2452b_05_dfu_eng.pdf

Posted on Mar 20, 2009

Muzzi_123
  • 749 Answers

SOURCE: Philips 321 voip phone, problem calling out with skype

some things to consider

Have you topped up credit on skype?

dialing code correct uk +44, mobile number +447958475236 ect?

if this does not work look in your manual and reset your phone and try again

regards

Muzzi_123

Posted on Apr 04, 2009

  • 1 Answer

SOURCE: use call phones through voip321

It took me a while to figure out but here is how I am able to dial out from skype to a hardline to a person not in my skype contact. Simply start to dial the number (not from the talk button!!!) then instead of hitting the talk button to dial, hit the skype button on the bottom left hand side. I also have to dial 001 then the phone number. Hope this works for you too. good luck.

Posted on Apr 15, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Caller ID is not working


Hello Samiran mandal, here is a solution.I purchased one cordless telephone (Siemens Gigaset) in Germany. I also had the same problem, caller-id did not work. I purchased this telephone because we can set different ringtones for different caller groups. But, if caller-id doesn't work, this feature also doesn't work. I had gone through internet and finally found that CA electronics, Bangalore has it and got it through courier (I live in Pondicherry). It worked flawlessly for two years. Then it stopped working. For 'no reason' I ordered for a 'caller-id' unit on ebay for Rs.75/- (+ Rs.75 shipping). I just got the unit and fixed it to my line. Very very surprisingly, my cordless telephone is now showing caller info. This is a real surprise to me. By the way, caller-id unit is "Eurotel" make, DTMF/FSK caller-id. I feel this is very nice solution. The 'caller-id' unit is nice (backlit display) and also there is no need of converter for using the caller-id feature of your foreign telephone. I connected caller-id between the line and telephone. That's all. Enjoy.

Apr 12, 2013 | Lands Phones

1 Answer

Vtech model 2656 caller id is not working. How can I fix this?


Hello,

Found this on the VTECH support site regarding your model:

Tip 1 of 1
spacer.gif
Caller ID and Call Waiting ID are subscription services, available from most local telephone service providers. You must subscribe to these services in order for the features to work on your phone. Contact your local telephone service provider for more information.

In addition, your caller must be calling from an area that supports caller ID.

Both you and your caller’s telephone service provider must use compatible caller ID systems.

If you subscribe to DSL service for this telephone line, DSL filters must be plugged into EVERY phone jack that has a phone. The DSL signal can cause caller ID disruption, static, noise and other issues on your line. DSL filters block the high frequency DSL signals from being transmitted to the telephone. If you are not using the DSL filters provided by the telephone company, this will cause static/noise and possibly caller id issues on your phones.

In most cases, we recommend you connect the plug end of the DSL filter into the telephone jack, then connect a telephone cord between the filter and your phone.

Please contact your service provider to obtain DSL filters and installation information.

Caller ID and Call Waiting ID may not be available for every call. Common reasons are incompatibilities between your and your caller’s service, transmission errors and answering calls before the ID data is received.

In addition if you would like to contact them or get more info on your phone, then use this link:

http://www.vtechphones.com/vtechui/support/faq_index.cfm

Nov 22, 2009 | Vtech VT 2656 Expandable Cordless DSS...

1 Answer

Lucent Partner 18D - Caller ID not working


The caller id information is sent from your local telco provider after the first ring and might not be able to be extended to the individual sets, try backing off the ring to answer on your voice mail from 2 to 3 rings to see if the information is then passed on. The Voice Messaging System message is being sent from the system showing who transfered the call to you. You should also notice that the ring pattern when that message is displayed is a standard ring followed by a beep meaning a transfer is taking place.

Nov 20, 2009 | Lucent PARTNER18 Corded Phone

1 Answer

No ID caller displayed on the phone


Is the phone FCC approved for use in the US? Does the model purchased in Singapore use the same Caller ID algorithm as US phones? Have you tested a known good caller ID capable phone at your location to make absolutely sure the caller ID is actually turned on?

Mar 09, 2009 | Panasonic KX-TG5632 Phone

2 Answers

Can't display caller id info


Does CID work on ANY phone in the system? The reason I ask is because prior to issue 7, a Caller ID card had to be inserted into the trunk card. If yours is older, it may not have the card.

Carl

Aug 26, 2008 | Panasonic KX-T7453 Corded Phone

1 Answer

# of rings


Hi Sharon,
The rings you hear when dialing your phone number is a machine in the local telephone office that is in place so you have something to listen to while your call is being processed and not your actual phone ringing, also the caller ID requires one to two ring cycles to gather the information it displays on your screen therefore the amount of rings you hear when calling a number rarely matches the actual number of rings at the phone you are calling. There is no programming in the Samsung 100 to change this as it is controlled by your local phone company. Hope this helps explain the situation, Good Luck

Jul 29, 2008 | Samsung DCS 12 Corded Phone

1 Answer

CALLER ID NOT DISPLAYED.DISPLAYS EXTERNAL CALL


Caller ID in the USA uses the FSK standard. For the most part, callerID in India uses DTMF (although I have heard of some FSK usage).

I am currently living in New Delhi and have an Airtel home phone line.My switch uses DTMF. I went to the Palika electronics bazaar (I awaysuse shop number 266 near gate 5, they seem to be a little kinder toforeigners as far as the "final price") and purchased an DTMF to FSKconvertor. My US phones now show caller ID information, although usingUS number seperations ### - ### - ####. I paid R500 but you couldprobably get it for around R400 if you are willing to put in the timebargaining. It looks like they are also available on Indian Ebay.

Mine says UST001B. It looks like these are low volume items becausethey stuck the components into a box marked "DSL Splitter" It works toconvert the caller ID as advertised.

Jul 17, 2008 | Philips CD4451B/37 Phone

1 Answer

GE MODEL 28112 DECT 6.0 CORDLESS PHONE


I contacted GE today and they told me how to get the caller ID to work on the additional handsets. You must follow these steps in the exact order given.

#1 - unplug the base phone
#2 - unplug the telephone line from the base phone
#3 - remove the battery packs from the phones
#4 - wait 10 minutes.

reverse the order when assembling. Put battery packs in phones, put the telephone line back in the base phone and lastly plug all phones back in. It takes about another 10 minutes after that before all phones start recognizing caller ID but it now works fine.

Mar 26, 2008 | GE 28112 Trio Cordless Phone

7 Answers

Caller ID is not working in India.


For people who have purchased cordless phone in usa and caller id is not working they should purchase fsk to dtmf converter at any local phone shop and caller id will start working.

Here is the article on various frequency used by various countries for caller id.

Hope this will help you out.

Detailed Product Description

There are 3 major caller ID specifications in the world: DTMF, ETSI FSK and Bellcore FSK. When users buy a foreign telephone devices(such as cordless phone, fax machine or computer telephony interface), may encounter the problems of non-match for caller ID standard. This will cause the device unable to display the caller ID. EX220 can solve this problem easily. This product can receive all 3 kinds of caller ID format, and convert to FSK(Bellcore or ETSI selectable) to match foreign telephone's standard.
EX220 has a rechargeable battery inside the device, during idle status, it gets power from the telephone line and recharge the battery, so no need to use or replace battery. Just plug one end to telephone line, and the other to the telephone device.
For example, if you live in Netherlands, Saudi or India, the caller ID standard is DTMF. You purchased a cordless caller ID phone from US(which uses Bellcore FSK standard), or from Germany(which uses ETSI FSK standard). You won't be able to use the caller ID feature. In this case, just get one EX220 and connect it between the telephone line and the cordless phone, your cordless caller ID phone will display the caller's number immediately.
Remark:
1. Telephone sets for UK and Japan standard are not applicable.
2. In some countries, users must subscribe to Telecom for caller ID service

Feature List
Caller ID Format Conversion --- Convert 3 kinds of caller ID(DTMF, Bellcore FSK or ETSI FSK) to ETSI FSK or Bellcore FSK(selectable)
Date/Time Stamp --- The DTMF caller ID doesn't content date/time stamp. User can set up clock of EX201, so each call will be sent with actual date and time stamp
Area Code Setting --- User can set up the area code, so the dial back feature can easily applied
Rechargeable battery powered by line --- Just connect to the telephone line, the built-in rechargeable battery can get power from the telephone line, no need any external battery nor power supply

News
Now, Multi-Line caller ID converter is available.

Dec 09, 2007 | Motorola Mobility 5.8 GHz Digital Cordless...

1 Answer

AT&T 900 MHz Cordless Telephone


Possibly. Since you didn't specify the model, see if it's listed at the manufacturer's web site at http://telephones.att.com/telephones_ui/support/dsp_manuals_list.cfm

Aug 23, 2007 | AT&T 900 MHz Cordless Telephone with...

Not finding what you are looking for?
Philips DECT 2151 Cordless Phone Logo

Related Topics:

339 people viewed this question

Ask a Question

Usually answered in minutes!

Top Philips Lands Phones Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18330 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

kakima

Level 3 Expert

98608 Answers

Are you a Philips Lands Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...