Question about Toys

Open Question

Assembly diagram for feihu black shark ka-50 rc helicoptor

Assembly diagram and parts list

Posted by Anonymous on

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

vish4
  • 409 Answers

SOURCE: i have an helicoptor rc it works alright but when

Check for the propeller , it might be having a small bend., or the center of gravity (weight) would have been shifted to the left side...
you can download the service manual here-->http://nettopdf.info/en/ebook/Search...wireless%20rc%20helicopter%20instruction%20manual-1.html
thanks for rating good luck

Posted on Feb 12, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Kitchen aid KP26M1X never used. First time turned on and it ran for 10 seconds then shut off. Turned it off and restarted then it ran for 10 seconds then shut off again. Keeps doing this. Would this be...


Hello CANADA43. From the symptoms you describe, I would say that your there is something awry with your mixer’s internal speed control assembly. You said the mixer had never been used and the spotty running started the very first time it was used. Is it still under warranty (have you owned it for less than one year)? If so I’d contact KA immediately and tell them about your problem with the stir speed not working correctly. The KA website is at: http://www.kitchenaid.com/flash.cmd?/#/page/home. Click on Customer Care>Contact Us> and the toll free phone number is listed to speak with someone. You can also look under the Warranty & Service Plans to see what KA will do for you. I've extracted parts of it here:
Hassle-Free Replacement Warranty
We’re so confident the quality of our products meets the exacting standards of KitchenAid that, if your mixer should fail within the first year of ownership, KitchenAid will arrange to deliver an identical or comparable replacement to your door free of charge and arrange to have your “failed” mixer returned to us. Your replacement unit will also be covered by our one year full warranty. Please follow these instructions to receive this quality service.
If you reside in the United States and your KitchenAid® mixer should fail within the first year of ownership, simply call our toll-free Customer Satisfaction Center at 1-800-541-6390, 8 a.m. to 8 p.m., Monday through Friday, 10 a.m. to 5 p.m., Saturday, Eastern Time. Give the consultant your complete shipping address. (No P.O. Box Numbers, please.) When you receive your replacement mixer, use the carton and packing materials to pack-up your “failed” mixer. In the carton, include your name and address on a sheet of paper along with a copy of the proof of purchase (register receipt, credit card charge slip, etc.).

If your mixer is no longer under warranty, then you can still replace the control assembly by yourself. Just be sure to have the Parts List manual on hand. If you're lacking one, you can download a PDF version from the KA website: http://www.kitchenaid.com/flash.cmd?/#/page/home.
Click on Customer Care>Locate Manuals & Guides> enter the visitor type “Consumer” and then Enter the 6 character model number, in your case: KP26M1, and select one of the first two files listed under Parts List (47) (The first file, KP26M1XAZ4.pdf (304.18 KB), is for a -4 series model and the second file, KP26M1XAZ5.pdf (724.41 KB) is for a -5 series with slightly different insides, so make sure you have the correct Parts List manual.)
For a series -4 mixer, turn to pgs. 4 & 4, titled Case, Gearing And Planetary Unit that shows an exploded view for the disassembly and reassembly of your mixer, along with all the parts. Locate Illus. No. 8, Control Assembly (incl. Knob). (For a series -5 mixer, turn to Pgs 4 & 5, and locate Illus. No. 19, Control Assembly). You’ll want either the black or grey knob contol assembly. The part numbers are the same for both series mixers, so you just need to choose the right color.
Here are five potential online vendors in no particular order: RepairClinic.com; mendingshed.com; searspartsdirect.com; partstore.com; and Grainger.com (for grease). Prices can vary widely between vendors, so do some comparison shopping.
Finally, here are some links to several excellent websites that detail the disassembling/reassembly of a KA Mixer. The mixers displayed in the links are different KA models, but the principles are the same.
Between these three websites and their excellent pictures and descriptions and your Parts List manual, you should now be able to completely disassemble and reassemble your mixer, should you decide to go that route.
If you feel this repair is beyond your capability, then I would seek out a local small appliance repair shop in your area. KA Customer Care can give you names of local KA authorized repair shops in your area, but you can also do an online search to supplement what KA may provide you. Call to explain your circumstances and find out their hourly rate and get an estimate of what they think it would cost to repair your mixer. Also, always obtain three or more estimates – do some comparison shopping. Good luck, I hope this helps. Howard, Burke, VA
If this solution was helpful, please rate it, thanks! – hslincoln

Jul 06, 2010 | KitchenAid Food Mixers

1 Answer

Is there an exploded assembly diagram I can reference


Hi LONGLEY632. It sounds like you’re in the need of your mixer’s parts list. It provides ‘reasonable’ exploded views of the various components of your mixer. Enough so that you can disassemble, identify parts and reassemble your mixer.
You can download a PDF version from the KA website at: http://www.kitchenaid.com/flash.cmd?/#/page/home.
Click on Customer Care>Locate Manuals & Guides> then enter the visitor type “Consumer” and the 6 character model number, in your case use KSM90P, in the Model Number box. Select one the files listed for your model that appears under Parts List (16): KSM90PSWH0.pdf (354.08 KB) and save that file to your PC. Check to verify this matches your mixer model.
Good luck! I hope this helps. Howard, Burke, VA
If this solution has been helpful to you, please rate it, thanks! -hslincoln

Jul 02, 2010 | KitchenAid KSM90 Ultra Power Series Stand...

1 Answer

Motor now has two speeds: off and 10 (highest) -


Hi REEDKL, Merry Christmas and Happy New Year! Based on your mixer’s symptoms, my first thought is that your mixer’s internal controller assembly (the speed knob), has gone bad. The inspection and troubleshooting of the control assembly is something you can do yourself, particularly if your mixer is out of warranty. Just be sure to have the correct Part List manual around when you start to disassemble your mixer.
If you're lacking one, you can download it from the KA website. Click on Customer Care>Locate Manuals & Guides> Enter the 6 character model number, in this case, KP26M1, and then select the last file: KP2671XWH3.pdf (325.07 KB) that appear under Parts List (21). Check to see that it matches your mixer model.
Turn to page 4, Case, Gearing and Planetary Assembly and locate Illus. #8, Control Assembly. This is what you’re looking for when you get the top (Illus. #1) off the mixer head.
First check to see if any of the connections have come loose. If everything looks tight then you probably need to replace it. Unfortunately the whole controller assembly is on a little PC board filled with resistors, capacitors and diodes, which was not meant to be 'home fixed' and where my ‘electronic expertise' ends. A local small appliance repair shop should be able to determine if the controller assembly is functioning properly or not, or you can just order replacement parts without the testing.
Although you don’t need to get further inside your mixer to make this repair, here are some links to several excellent websites that detail the disassembling/reassembly of a KA Mixer that you might want to keep in your ‘toolbox’, should you have to delve inside your mixer in the future. The mixers displayed in the links may be different than your KA model, but the principles are the same.
Between these three websites and their excellent pictures and descriptions and your Parts List manual, you should now be able replace any part to your KA mixer.
If you feel this repair is beyond your capability, then I would seek out a local small appliance repair shop in your area. KA Customer Care can give you names of local KA authorized repair shops in your area, but you can also do an online search to supplement what KA may provide you. Call to explain your circumstances and find out their hourly rate and get an estimate of what they think it would cost to repair your mixer. Also, always obtain three or more estimates – do some comparison shopping.
Good luck and have fun. I hope this helps. Howard, Burke, VA
If this solution has helped you, please rate it, thanks! - hslincoln

Jan 04, 2010 | KitchenAid KP2671 Professional 6 Series...

1 Answer

I need a replacement for the speed selection lever on the KP2671 Pro 6. I have already removed it. The number on the switch panel I believe is 9705671 (if I am reading it right)Is there a place online...


Merry Christmas BILLANDSHEIL! It sounds like you’ve already identified the problem and you just want to order the correct replacement part(s). I assume you’ve got a Parts List manual on hand, but if you're lacking one, you can download a PDF version from the KA website at: http://www.kitchenaid.com/flash.cmd?/#/page/home.
Click on Customer Care>Locate Manuals & Guides> Enter the 6 character model number, in your case: KPM2671 and select from one of the files under Parts List (24). You’ll need to carefully check to make sure the manual you download matches your mixer model, because KA is notorious for providing differing part nos. for the same Illus. No. depending on the model and/or series version. After checking the 5 variations of Parts List manuals for your model, I found seven different part numbers based upon the control knob color selected. I think they make it confusing on purpose!
What ever Parts List manual you finally select, turn to pages 4 & 5 titled – Case, Gearing And Planetary Unit, and locate Illus No. 8, Control Assembly, and refer the part number for the knob color of your mixer. That is the part number you will need to use when reordering.
It’s not clear if you just want the speed selector knob or the whole knob control assembly. Unfortunately KA doesn’t just offer the knob, but only the whole PC board control assembly with knob.
As far as parts go, here are four potential online vendors in no particular order: RepairClinic.com; mendingshed.com; searspartsdirect.com; partstore.com. Prices for the same part can vary widely between vendors, so do your comparison shopping. (As a check, you could also try to input the part no. you found and see if you get any ‘hits’ from the vendors above.)
Although you don’t need to get further inside your mixer to make this repair, here are some links to several excellent websites that detail the disassembling/reassembly of a KA Mixer that you might want to keep in your ‘toolbox’, should you have to delve inside your mixer in the future. The mixers displayed in the links may be different than your KA model, but the principles are the same.
Between these three websites and their excellent pictures and descriptions and your Parts List manual, you should now be able replace any part to your KA mixer.
Good luck and have fun. I hope this helps. Howard, Burke, VA
If this solution has helped you, please rate it, thanks! - hslincoln

Dec 25, 2009 | KitchenAid KP2671 Professional 6 Series...

1 Answer

Mixer run on high


Hi, RHASKEY. You don’t say what your model is, which would be most helpful, so I’m going to assume you’ve got one of the 6 qt Solid State mixers, models KD2661-3, KT2651-3 or KP2671-3 (an Epicurean or variation) or one of the 6 Qt. Professional 600 Bowl lift version like a KP26M1X model. Of course I could be way off base, too, so bear with me. BTW, the Hall Effect “switch” and Hall Effect “Sensor” are synonymous.
The Hall Effect sensor detects the rotation of the motor and limits the motors speed based upon your Selector switch lever setting. We don’t need to go into electromagnetic theory here, but it’s a pretty simple sensing device so I would suspect it’s not the cause of your problems. The Hall Effect Sensor feeds back to the (speed) Control Assembly and from your description of your mixer’s symptom’s I would say the signal is getting corrupted within the Control Assembly; hence the intermittent and erratic running.
The Control Assembly is a little PC board fabricated with numerous electronic parts; the more components the higher the probability one of them will go bad, for whatever reason. My recommendation would be to replace the Control Assembly board, but you can always order and replace the Hall Effect Sensor, too… We’re only talking a couple of dollars difference in parts.
The inspection and troubleshooting of the inside of your mixer is a DITY capability, particularly if your mixer is out of warranty. Just be sure to have the Parts List manual on hand. If you're lacking one, you can download a PDF version from the KA website (http://www.kitchenaid.com/flash.cmd?/#/page/home).
Click on Customer Care>Locate Manuals & Guides> and enter the 6 character model number and select one of the files listed under Parts List (check to see it this matches your mixer model).
After you’ve removed the Gearcase Motor Housing (mixer head top half) look where the Speed Control knob is attached. This will be the Control assembly. Inspect all the connections to see if a connection has come loose. Unfortunately the whole controller assembly is fabricated on a little PC board filled with resistors, capacitors and diodes, which was not meant to be 'home fixed'. My 'expertise' ends at being able to recognize a resistor from a capacitor. A local small appliance repair shop should be able to determine if the controller assembly is functioning properly or not or you can just order replacement parts without the testing.
As far as KA replacement parts go, here are four potential vendors in no particular order: RepairClinic.com; mendingshed.com; searspartsdirect.com; partstore.com. Prices for the same part can vary widely between vendors, so do your comparison shopping.
While your mixer is apart it would be ideal to check for any other unseemly wear and tear on the gears, etc. It can be messy but quite gratifying to diagnose and repair your mixer yourself.
Here are some links to several excellent websites that detail the disassembling/reassembly of a KA Mixer.
Between these three websites and their excellent pictures and descriptions and your Parts List manual, you should now be able to completely disassemble and reassemble your mixer.
Good luck and have fun. I hope this helps. Howard, Burke, VA
If this solution has been helpful, please rate it, thanks! – hslincoln

Dec 18, 2009 | Food Mixers

1 Answer

Mixer runs at full speed only KitchenAid proffessional 6 2 years old


Hi, LAKEBAY. You didn’t provide your model number which would have been helpful and limits me in what I can offer you as a possible solution.
The symptoms you describe are indicative of a speed controller assembly going bad inside your mixer’s head and this is something you can fix this yourself.
The inspection and troubleshooting of the inside of your mixer is a DITY capability, particularly if your mixer is out of warranty. Just be sure to have the Parts List manual on hand. If you're lacking one, you can download a PDF version from the KA website at: http://www.kitchenaid.com/flash.cmd?/#/page/home.
Click on Customer Care>Locate Manuals & Guides> Enter the 6 character model number and select a file listed under Parts List. Some models will have multiple files. Download one and check to ensure it matches your mixer model. If it doesn’t match, continue to look at other manuals until you find the correct manual that does match.
Depending on your model, locate the Governor Assembly and Control Plate Assembly on the pages titled:Motor Control Parts, or Control Assembly on pages titled: Case, Gearing and Planetary Unit. The illustrations provide an exploded view for the disassembly and reassembly of your mixer’s components, along with all the parts.
First inspect around the controller assembly to ensure all the wire connections are OK. It's possible a connection has come loose. Unfortunately the whole controller assembly is fabricated on a little PC board which was not meant to be 'home fixed', and my 'expertise' ends there. A local small appliance repair shop should be able to determine if the controller assembly is functioning properly or not, or you can just order replacement parts without the testing.
As far as parts go, here are four potential vendors in no particular order: RepairClinic.com; mendingshed.com; searspartsdirect.com; partstore.com. Prices for the same part can vary widely between vendors, so do your comparison shopping.
If you feel troubleshooting and repairing is beyond your capability, then I would seek out a local small appliance repair shop in your area. KA Customer Care can give you names of local KA authorized repair shops in your area, but you can also do an online search to supplement what KA may provide you. Call to explain your circumstances and find out their hourly rate and get an estimate of what they think it would cost to repair your mixer. Also, always obtain three or more estimates – do some comparison shopping.
While your mixer is apart it would be ideal to check for any other unseemly wear and tear on the gears, etc. It can be messy but quite gratifying to diagnose and repair your mixer yourself.
Here are some links to several excellent websites that detail the disassembling/reassembly of a KA Mixer.
Between these three websites and their excellent pictures and descriptions and your Parts List manual, you should now be able to completely disassemble and reassemble your mixer.
Good luck and have fun. I hope this helps. Howard, Burke, VA

Dec 10, 2009 | KitchenAid Food Mixers

1 Answer

ALL SPEEDS SEEM TO BE TOO FAST. WON'T SHIFT TO


Hi BDALLEN289. Sorry to hear about your mixer problem. Based on the symptoms you describe I suspect your problem has to do with the speed control assembly or governor assembly inside your mixer’s head and this is something you can fix this yourself.
The inspection and troubleshooting of the inside of your mixer is a DITY capability, particularly if your mixer is out of warranty. Just be sure to have the Parts List manual on hand. If you're lacking one, you can download a PDF version from the KA website at: http://www.kitchenaid.com/flash.cmd?/#/page/home.
Click on Customer Care>Locate Manuals & Guides> Enter the 6 character model number in your K45SSW, and select the file listed under Parts List (1), K45SSWH0.pdf (341.41 KB). Check to ensure it matches your mixer model.
Turn to pgs. 6 & 7 titled: Motor Control Parts that shows an exploded view for the disassembly and reassembly of your mixer’s electrical components, along with all the parts. Locate Illus. No. 24, Governor Assembly and No. 25, Control Plate Assembly. I suspect your mixer’s speed problems problem are connected to one (or both) of these two items.
First inspect around the controller assembly to ensure all the wire connections are OK. It's possible a connection has come loose. Unfortunately the whole controller assembly is fabricated on a little PC board which was not meant to be 'home fixed', and my 'expertise' ends there. A local small appliance repair shop should be able to determine if the controller assembly is functioning properly or not, or you can just order replacement parts without the testing.
As far as parts go, here are four potential vendors in no particular order: RepairClinic.com; mendingshed.com; searspartsdirect.com; partstore.com. Prices for the same part can vary widely between vendors, so do your comparison shopping.
If you feel troubleshooting and repairing is beyond your capability, then I would seek out a local small appliance repair shop in your area. KA Customer Care can give you names of local KA authorized repair shops in your area, but you can also do an online search to supplement what KA may provide you. Call to explain your circumstances and find out their hourly rate and get an estimate of what they think it would cost to repair your mixer. Also, always obtain three or more estimates – do some comparison shopping.
Good luck. I hope this helps. Howard, Burke, VA
If this solution has been helpful, please rate it, thanks! - hslincoln

Nov 29, 2009 | KitchenAid K45SS Classic Stand Mixer

1 Answer

Speed control faulty , only runs on 8 to10 speed.


Hi, RYLAND. You’ve assessed the problem, now you need to disassemble your mixer and replace the faulty control assembly. Unfortunately since you did not provide any model information, I kind of limited in what I can provide you for an answer, so I’ll give you a ball park answer. You suspect your problem has to do with the speed control assembly or governor assembly inside your mixer’s head and this is something you can fix this yourself.
The inspection and troubleshooting of the inside of your mixer is a DITY capability, particularly if your mixer is out of warranty. Just be sure to have the Parts List manual on hand. If you're lacking one, you can download a PDF version from the KA website at: http://www.kitchenaid.com/flash.cmd?/#/page/home.
Click on Customer Care>Locate Manuals & Guides> Enter the 6 character model number and select a file listed under Parts List. Some models will have multiple files. Download one and check to ensure it matches your mixer model. If it doesn’t download another until you find the correct manual.
Depending on your model, locate the Governor Assembly and Control Plate Assembly Turn on the pgs. titled – Motor Control Parts, or Control Assembly on pgs. titled – Case, Gearing and Planetary Unit. The illustrations provide an exploded view for the disassembly and reassembly of your mixer’s components, along with all the parts.
First inspect around the controller assembly to ensure all the wire connections are OK. It's possible a connection has come loose. Unfortunately the whole controller assembly is fabricated on a little PC board which was not meant to be 'home fixed', and my 'expertise' ends there. A local small appliance repair shop should be able to determine if the controller assembly is functioning properly or not, or you can just order replacement parts without the testing.
As far as parts go, here are four potential vendors in no particular order: RepairClinic.com; mendingshed.com; searspartsdirect.com; partstore.com. Prices for the same part can vary widely between vendors, so do your comparison shopping.
If you feel troubleshooting and repairing is beyond your capability, then I would seek out a local small appliance repair shop in your area. KA Customer Care can give you names of local KA authorized repair shops in your area, but you can also do an online search to supplement what KA may provide you. Call to explain your circumstances and find out their hourly rate and get an estimate of what they think it would cost to repair your mixer. Also, always obtain three or more estimates – do some comparison shopping.
While your mixer is apart it would be ideal to check for any other unseemly wear and tear on the gears, etc. It can be messy but quite gratifying to diagnose and repair your mixer yourself.
Here are some links to several excellent websites that detail the disassembling/reassembly of a KA Mixer.
Between these three websites and their excellent pictures and descriptions and your Parts List manual, you should now be able to completely disassemble and reassemble your mixer.
Good luck and have fun. I hope this helps. Howard, Burke, VA
If this solution has been helpful, please rate it, thanks! – hslincoln

Nov 21, 2009 | Food Mixers

Not finding what you are looking for?
Toys Logo

Related Topics:

23 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toys Experts

kakima

Level 3 Expert

102366 Answers

yadayada
yadayada

Level 3 Expert

75797 Answers

ray gallant

Level 3 Expert

42881 Answers

Are you a Toy Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...