- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Press and hold for 3 seconds the button on the wall control that has an icon of a lock. The light should quit blinking and your remotes will once again work. Holding that button for 3 seconds toggles your openers vacation mode.
you may have to reprogram the remote. it's easy push the square red or blue button on the door opener and within 30 sec push the 4digit number on your remote and push enter. the light should blink twice to tell you it took the new connection.
you will need to train (link) the remote to the garage door opener. to do this you will need to find the remote "train" button on the operator.
If you have the manual for the garge door opener this will show you where it is located.
push the train button on the operator, an LED light will start blinking. Then push one of the buttons on the remote. the LED light on the operator will stay on. push the button on the remote again and the light on the operator will turn off.
try the remote it should work now.
The little button with a padlock on the wall control is a "vacation" lockout feature that
disables the remotes. There should be a small LED on the wall control
that is always on steady. When the padlock button is pressed and
released the LED should be constantly blinking (indicating the vacation
lockout mode is active) and your remotes should be disabled. The wall
control will still operate the door. Pushing the padlock button again
should make the LED stop blinking and restore the door to normal
Did you inadvertantly hit the "vacation lock" button on the Mounted push button? This will cause the remotes not to work. Try hitting the button again, and then see if the blinking goes to solid green.