Question about Ricoh Office Equipment & Supplies

Open Question

I need to calibrate the touch screen on a ricoh aficio mp2510

The screen on my Ricoh Aficio MP2510 is out of calibration, meaning that I need to touch about an inch below the desired button for it to work. It makes the buttons on the lower part of the screen unusable which makes it impossible to use most of the machine's functions. Any idea how to calibrate this thing?

Posted by Anonymous on

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 990 Answers

SOURCE: Installing PCU on Ricoh Aficio MP2510.

Hello sir; The procedure little bit difficult, Remove PCU, remove the front cover(two screws), remove the rear bushing by remove one lock ring, remove the front joint, remove the developer hopper cover( 3 hook ) dump the old one out vacuum entire unit ( magnet roller ), fill in new developer, replace hopper cover, after replace PCU and developer you need to do some simulation, #1, press "clear mode" "107" and press hold "clear/stop" for 3 seconds, then touch screen on "copier sp". #2, enter sp3902-9 to1 for black drum unit, sp 3902-10 to 1 for yellow, sp3902-11 to 1 for cyan, sp3902-12 to 1 for magenta, #3, enter 3902-005 for black, 3902-006 for yellow, 3902-007 for cyan, 3902-008 for magenta, set 3902 to 1 for each of these if replaceing developer, press "exit" twice to end the service.

Posted on Sep 18, 2009

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

What is error code SC542 for ricoh aficio 9005?


Ricoh Aficio MP2510, 3010 Error code sc542 on Lanier ...

? 6:08
https://www.youtube.com/watch?v=58MQVyjfDyg
Sep 3, 2013 - Uploaded by Used .Copier
Are you getting Error Code sc542 on your Ricoh, Lanier,Savin or Gestetner copiers? ... Ricoh Aficio 1022 ...

How to reset Ricoh Error Code sc542 sc546 sc548 problem ...

? 2:41
https://www.youtube.com/watch?v=3CnGl1Ytp34
Sep 21, 2015 - Uploaded by Copier Liquidation Center
How to reset Ricoh Error Code sc542 sc546 sc548 problem ...Ricoh Aficio copiers : AFICIO 1013 F

Dec 02, 2015 | Ricoh Aficio Office Equipment & Supplies

1 Answer

Colour out of alignment on aficio c811dn ricoh.when i print a demo page,the colours are out of alignment.


The transfer belt is not calibrated or the ID sensors are dirty. Read the user manual on how to calibrate it. No manual? Go to ricoh-usa.com

Sep 29, 2014 | Ricoh Aficio SP C811DN Laser Printer

1 Answer

Touch screen blocked


The touch screen could have lost its calibration, but there is a good chance that it is bad, and needs to be replaced. To calibrate it, push the yellow clear modes key, then the numbers 1, 9, 9, 3, then push the red "Clear / Stop" key 5 times, and choose number one. Follow the prompts. Use a stylus or other dull pointed item. If you don't get a response, you need a new touch screen.

May 22, 2014 | Ricoh Aficio 450 Copier

1 Answer

What does sc392 mean on a mp2510


Someone forgot to remove the tone
seal of the PCU
ID sensor defective
TD sensor abnormal
Drum does not turn
Development roller does not turn
Poor connection of the PCU

Apr 03, 2014 | Ricoh Aficio 2022 All-In-One Laser Printer

1 Answer

Touch screen calibration


Press the keys listed below, please note you need to press the Clear/Stop key 5 times. The screen will change after entering the keys and touch screen calibration will be option number 1. The calibration will consist of pressing a couple of small circles on the screen.

Clear Modes->1-9-9-3->Clear/Stop(5 times)
or
Reset->1-9-9-3->Stop(5 times)

Feb 17, 2014 | Ricoh Aficio MP C4500 Copier with Print,...

1 Answer

Ricoh Aficio 3025 Copier LCD Touch Screen gets hang after calibration


You need to replace the screen to fix your problem. But if this machine is the model I think it is you need a whole new machine.

Jul 23, 2017 | Ricoh Office Equipment & Supplies

1 Answer

Touch screen working but it's not recognizing finger to chang


You need to calibrate the touch screen.
Try this:
Press Yellow key
On the key pad Press 1-9-9-3.
Press 5 times the red key (the 5th old a little longer)
(If everything is good in the touch screen shows an option "calibrate touch screen")
Try to touch there and will show a little arrow on each corner. With a pen click there to calibrate the touch screen.
Click exit and its done

Mar 08, 2011 | Ricoh Aficio 3025P Black and White Copier

1 Answer

Installing PCU on Ricoh Aficio MP2510.


Hello sir; The procedure little bit difficult, Remove PCU, remove the front cover(two screws), remove the rear bushing by remove one lock ring, remove the front joint, remove the developer hopper cover( 3 hook ) dump the old one out vacuum entire unit ( magnet roller ), fill in new developer, replace hopper cover, after replace PCU and developer you need to do some simulation, #1, press "clear mode" "107" and press hold "clear/stop" for 3 seconds, then touch screen on "copier sp". #2, enter sp3902-9 to1 for black drum unit, sp 3902-10 to 1 for yellow, sp3902-11 to 1 for cyan, sp3902-12 to 1 for magenta, #3, enter 3902-005 for black, 3902-006 for yellow, 3902-007 for cyan, 3902-008 for magenta, set 3902 to 1 for each of these if replaceing developer, press "exit" twice to end the service.

Sep 18, 2009 | Office Equipment & Supplies

1 Answer

Ricoh Aficio 3025 Copier LCD Touch Screen out of Allignment


It's not in service mode, but rather in the 'self diagnostic menu'. Access it as follows:
Press "clear modes", 1 9 9 3, "clear/stop" (5 times).

** Do not try any other adjustments in this mode...only touch screen


please rate me :)

Apr 10, 2009 | Ricoh Office Equipment & Supplies

3 Answers

RICOH AFICIO MP 2000


you must clean developer and drum section. after that you must put new developer and initialize it. After that place in correct toner.

Oct 15, 2008 | Ricoh Aficio 1027 All-In-One Laser Printer

Not finding what you are looking for?
Office Equipment & Supplies Logo

Related Topics:

78 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ricoh Office Equipment & Supplies Experts

Adorjani Laszlo

Level 3 Expert

1297 Answers

OfficeServiceAjnc
OfficeServiceAjnc

Level 2 Expert

183 Answers

fares

Level 1 Expert

67 Answers

Are you a Ricoh Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...