Question about Televison & Video

Open Question

Sansui model TVS2746C digital?

Is this tv digital ready. There was a test on TV last night. When they turned the analog off, we still got a picture. I don't see the letters on the back of the tv that says it has a digital tuner. We do not have a owners manual.

Jeri

Posted by on

  • Anonymous Feb 19, 2009

    i have sansui TVS2746C. i am not sure if it's digital it's made in 2004.

×

5 Suggested Answers

  • 1694 Answers

SOURCE: Sharp 27G-S60 TV analog or digital?

Call 1-800-237-4277 1-800-BE SHARP
FAX 1-630-378-9981.................................................

Posted on Nov 20, 2007

  • 1 Answer

SOURCE: Digital Tuner or Analog

I have the JVC AV-27020 and had to download the manual just today. I checked where I got my manual and they did not have anything for an ACV-27020. The link for the TV manual I downloaded is below. Maybe it will help.

http://www.retrevo.com/s/JVC-AV-27020-TVs-review-manual/id/279ag501/t/1-2/

Posted on Nov 30, 2008

SOURCE: Is my Toshiba TV digital or analog?

if there is a label on the tv stating any of these words “Integrated Digital Tuner,” “Digital Tuner Built-In,” “Digital Receiver,” or “Digital Tuner,” “DTV,” “ATSC,” or “HDTV” then yes
if they say “Digital Monitor” or “HDTV Monitor,” or as “Digital Ready” or “HDTV Ready" then no

Posted on Jan 08, 2009

ltfrc
  • 227 Answers

SOURCE: is my sansui sdtv 3200A dtv ready?

SDTV The "D" means 'Defenition' not Digital, S is for 480i. You will need a convertor box. Sorry.....

Posted on Feb 16, 2009

  • 1 Answer

SOURCE: rca tv model 32v432t

hello there...

I really need a help for RCA TV 32v432t is not working the sound volume and anything is fine...

Posted on Aug 25, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My TV picture is not coming in and neither is all my channels.


Perhaps you have the TV set to receive analogue TV rather than digital (DBV). Consult the manual about receiving a digital signal.

Jan 21, 2014 | Sansui 19 in. LCD TV

1 Answer

Need codes for rca remote rcu404n for sansui tv & ge converter box


003,007,001,009,004 are the codes to check. If you wish to get more setup codes, three digits, four digits or five digit ones, check this link. Pull up older posts. Setup code list and setup instructions to some popular model remote controls are given.

Mar 06, 2013 | Televison & Video

1 Answer

How do we scan/program in local tv channels. We bought an external antenna, but get no picture. Typically, there is a protocol for scanning channels into the set. Model is Sansui TVS2746B, and the set was...


Okay, does this tv have a built in DIGITAL tuner? Most tv's only have an analog tuner. You can tell the difference while you are changing the channels. If the channel indicates 2.1 or 2.2 and so forth, it is on a digital channel mode. If you change the channel and it indicated 2, 3, 4, etc. it is analog. If it has digital capability change the input until you see 2.1, 3.4 etc. If you cycle through all the inputs on the tv like, input 1 (TV) input 2(DVD) input 3(HDMI) and so forth and you never see the digital channel you most likely do not have a digital tuner. You will need to purchase a digital converter which will convert it to analog and you can watch it by placing you tv on analog channel 3 just like the old vcr's. Hope this helps and please don't forget to rate this solution.

Jan 22, 2011 | Samsung TSL2793HF 27" TV

1 Answer

My sansui tv makes a loud high pitch noise. I have had it 3 years, it is a a riging noise, and hard to hear the tv shows. what do i do?


ever since for ever, ive always heard a loudish high pitched ring from analog tv's. e.g. i would know a tv was on in another room even if it was muted. ive told other people about it but they dont seem to hear what i hear. so im gonna geuss either

a. analog tv's all make that noise to a verying degree but most people just dont notice it or subconciously cancle it out as normal.

b. its a kind of hyper sensitivity to high pitched noise, in essence, tinitus.

on a final note, its not medical as i always pass my hearing tests. but to answer your question, either buy a digital tv or turn up the volume.

Sep 09, 2010 | Sansui 27" TV

1 Answer

My TV says "DIGITAL CHANNEL STRENGTH IS LOW" even though it is connected to a RCA ANT1450 antenna.


I just looked at a TV last night for this. I don't know what you've tried yet, but I was getting that message until I went into the menu and selected the automatic channel scan. I forget what it was actually called, but you'll find it. After that, 19 digital stations came in beautifully with a cheap set of rabbit ears. (The scan will also find analog channels, which you can delete later on.) Good Luck.

Jun 12, 2009 | Sansui 27 inch TV

1 Answer

Trouble getting digital on a sansui 27"


your antenna is not strong enough to receive

digital or your in a area where large

structures are blocking the reception.

you could try turning the antenna slightly

and rescanning .

Jun 12, 2009 | Sansui DTV2760 27" TV

1 Answer

DTV1300A Sansui is not dtv ready, Am I doing something wrong?


To put your digital channels into the memory of the DTV1300 or 1900 press the MENU/ENTER button. Go to CH SETUP. Press the VOL + button. Go to TV CABLE. Use VOL+ button to set to TV for antenna or CABLE for cable without a cable box. Go to AUTO CH MEMORY. Press the VOL+ button. Wait for the search screen to go away after the analog and digital searches finish on their own. Check ALL your channels with the CH up button. I hope this helps you.

Mar 14, 2009 | Sansui DTV1300 TV

2 Answers

New TV doesn't register being HD ready during test TV stations do


Try going into the setup menu and make sure it is set to antenna then do a channel program. You don't need to wait for a test there are plenty of channels already there. Both digital and analog channels are still available so you will still a message that you are not receiving digital if you are putting it on an analog channel. The channel number has to have a dot(.) in it like 8.1, 24.1 If there is no dot you are on an analog channel

Mar 13, 2009 | Westinghouse Electric W1603 15.6 in. LCD...

2 Answers

Sansui tv dtv2784


No this TV is not HD ready. However it is digital (ATSC) ready meaning now that most of the analog brodcasts have stopped it will receive the digital broadcasts so you don't need a converter box. Since it can only display 480i resolution it is not HD ready. You would need a TV that can display 720p or better to be considered HD ready.

Jan 04, 2009 | Sansui 27" TV

1 Answer

How to hook up additional speakers to the TV


If you have a surround sound system, (amplifier and speakers), run the DVD speakers out wires to the amplifier IN. Thi way, you don't even need the TV speakers.

Jul 26, 2008 | Sansui HDLCD3200 TV

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

298 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

72670 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

yadayada
yadayada

Level 3 Expert

70387 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...