Question about Canon Office Equipment & Supplies
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
You have a high-voltage leak to the transfer corona. This could be due to several different things, usually it's a dirty corona, maybe excessive dust or toner in the corona assembly. Toner conducts electricity and can leak voltage from the transfer corona to the frame. It may also be the "end-blocks," the thing in the back of the machine into which the transfer corona plugs when you close the drawer and lift up on the green handle. These crack and can cause intermittant failure.
I would start by taking a can of air and thoroughly blowing out the corona assembly and see what that does for you...
Posted on Aug 05, 2008
SOURCE: IR 2870
The waste toner container is full. the front cover of the machine (the one with the Canon logo on it) must be removed. behind you will see a big white plastic bottle. Remove the bottle, empty the contents into the bin, wipe it off, and refit all removed parts. Finally restart the copier.
Posted on Sep 24, 2008
This is error between the reader and the copier. The reader cannot be detected at startup. Problably you will have to power down the copier, reseat the cable from the reader and restart. If this again fails you may have a reader controller board problem
Posted on Feb 02, 2012
Tips for a great answer:
May 23, 2015 | Canon IR 8070
Jun 18, 2013 | Canon ImageClass MF4412 Toner Black Repl -...
Feb 02, 2012 | Canon Office Equipment & Supplies
Feb 07, 2010 | Canon imageRUNNER 5000 Copier
260 people viewed this question
Usually answered in minutes!