Mi Canon XL1 have a problem,the problem is on the lens,i whan`t no haw to connect de the cabos Yellow,Red,Blue,Braun,Orang.Purple,Green,in to the raet places insid the lens,i know i have to weld de cados,all i want no is the raet places,the cabos have to connect in the 7 smalls square on the back the lens,you have to open the 5 Metal Scews,the cabos is insid,thanks
An expert who has written 20 answers of more than 400 characters.
An expert who has answered 20 questions.
Re: hi im Eddie
If you are talking about cables connecting to the lens, you either do not have an xl lens, or your lens is WAYYY beyond ant help you could find here. Your best bet is to call up & have it in fro service with Canon,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need. goodluck!
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Hi, please check to see if your colors match the ones below. If yes, then connect them to the aftermarket colors shown next. Assuming your factory installation has only four speakers, there should not be a lot of wires left over.
1983 Cadillac De Ville Stereo Wiring, aftermarket stereo wire
Car Radio Battery Constant 12v+ Wire: Orange, yellow
Car Radio Accessory Switched 12v+ Wire: Yellow, red
Car Radio Ground Wire: Black, black
Car Radio Illumination Wire: Gray (tape off), none
Car Stereo Dimmer Wire: Brown (tape off), none
Car Stereo Antenna Trigger Wire: Pink, blue
Left Front Speaker Positive Wire (+): Tan, white
Left Front Speaker Negative Wire (-): Gray, white/black
Right Front Speaker Positive Wire (+): Light Green, gray
Right Front Speaker Negative Wire (-): Dark Green, gray/black
Left Rear Speaker Positive Wire (+): Brown, green
Left Rear Speaker Negative Wire (-): Yellow, green/black
Right Rear Speaker Positive Wire (+): Dark Blue, purple
Right Rear Speaker Negative Wire (-): Light Blue, purple/black
1995-97 Nissan Maxima Stereo Wiring
6 1/2" Doors
Left Front (+)
Left Front (-)
Right Front (+)
Right Front (-)
6 1/2" Rear Deck
Left Rear (+)
Left Rear (-)
Right Rear (+)
Right Rear (-)
Diagram for any aftermarket head unit
Red: switched 12volt (accessory)
Yellow: 12v Constant
Orange: Illumination (Dimmer)
White & White/Black: +/- Front Left
Gray & Gray/Black: +/- Front Right
Green & Green/Black: +/- Rear Left
Purple & Purple/Black: +/- Rear Right
Red = ground black = ground Grey/blue = Left rear (+) yellow/black = ignition 12v white/purple = right rear (-) green/black
= (could this be green / violet?) than it is 12v constant blue/red = illumination orange/green = left front (+) white/green = right front (-) blue/white = left front (-) brown/yellow = left rear (tan / yellow) (-) green/orange = right front (+) orange/red = right rear (+) blue = not used
Rotate the iTrip AutoPilot FM Transmitter controller so that
its buttons are facing up and its data
cable is on the left side.The
data cable wires attach to a row of contact points along the left side of the
circuit board as follows (from top to bottom): 1 = Purple 2 = White 3 = Blue 4 = Red 5 = Black 6 = Brown 7 = Green 8 = Yellow 9 = <unused>
Under the center console/dash you should has two connectors.
A Right Front Speaker (+) Green Gray B Left Front Speaker (+) Pink White C Right Front Speaker (-) Blue Gray w/ Black Stripe D Left Front Speaker (-) Purple White w/ Black Stripe E Ground Wire Black Black F +12 Volt Ignition Wire Gray Red G Power Antenna Wire 1 Blue (join wires 1 & 2 H Power Antenna Wire 2 together to this blue wire) I Do Not Use
J Right Rear Speaker (+) Red Purple K Right Rear Speaker (-) White Purple w/ Black Stripe L +12 Volt Battery Wire Blue w/ Yellow Stripe Yellow M Left Rear Speaker (+) Black Green N Left Rear Speaker (-) Yellow Green w/ Black Stripe
glad you posted what colors you do have , cause 2 resources didn't match ,actually 3 , i did find a match to your colors was a 97 year model premium radio, so we have a match .....
black/ light green = ground dark green = left front spkr + purple = right front spkr + blue/white = right rear spkr - brown/blue = left rear spkr - brown/yellow = left rear spkr + blue/orange = right rear spkr + black/yellow = park lamps brown/red = left front spkr - orange = dimmer signal pink = fused battery + green/red = radio choke relay red/white = fused ignition blue/red = right front spkr -
Not a whole I can do to help. What I can do is refer you to go get a Chilton, or Haynes manual thac voers your Plymouth Voyager. They have schematics with wire colors labeled.You will have a good shot at figuring out which wire is which.