Question about Lexmark Printers & Copiers

3 Answers

I have a Lexmark X7350 printer. It had been working fine, but suddenly it dosen't communicate with my computer. I makes good copies, but I can't print from my computer. I have the Vista premium operating system. I did the troubleshooting in your manual like unplugging the printer power and reconnecting it, and disconnecting the USB cable, etc. Then I uninstalled the driver, and tried to reinstall it with your disc. I get an error message which says: "specified folder does not contain a compatible software driver for your device. If folder contains a driver make sure it is designed to work with Windows for 32 bit systems." HELP!! HELP!!

Posted by on

  • pjohn2ny Oct 23, 2008

    It's been working with my Vista system fine for many months. This problem suddenly developed.

  • pjohn2ny Oct 23, 2008

    I downloaded the proper driver from your web site, but when I tried to install it I got a message that the file can't be unzipped.

×

3 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 10,594 Answers

Are you sure that your computer has no virus
or you have updated anti-virus software there and scanned your PC?

Posted on Oct 26, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Master:

    An expert who has achieved Level 3.

  • Master
  • 538 Answers

Ok..step one..

remove old lexmark software completely

step two, go to www.lexmark.com and get a fresh set of vista drivers.

step three..turn off and disconnect printer from computer

step four..install new software..make sure it asks for the printer to be located..during install

step five...plug in printer, no power to printer##


step six power on printer..


Posted on Oct 26, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,550 Answers

Some printer is not supported by vista .

let me check and inform you .

Posted on Oct 23, 2008

  • 1 more comment 
  • SAM ANDERSON Oct 23, 2008

    Download the driver from the official website and try installing it from the link below

    Lexmark X7350


    If your problem still exists let me know .


  • SAM ANDERSON Oct 23, 2008

    .inf files might have been missing that why you where receiving the error when trying to install .

    So download the driver from above site and install it .

    It will contain all the required files .




  • SAM ANDERSON Oct 24, 2008

    In vista it is difficult to unzip any file . Even if it unzips it will take long time .
    Download this patch from the link below

    7zip


    This software will help to unzip in vista

    Due to security reason in vista you cant unzip easily . Even if it unzips it will be very slow for 40 mb it will take around 2 hours to complete the task .


×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Wont turn on


did you check the usb cable try another cable if not check the power cord if it dose not turn on then you need a new one

Oct 29, 2013 | Lexmark X7350 All-In-One Printer

1 Answer

X7350 lexmark to windows 7


you will have to remove the printer software and then reinstall it again some of the driver flies has gone when you clean the system from virus

Apr 17, 2012 | Lexmark X7350 All-In-One Printer

1 Answer

I have a Lexmark x7350 connected to a PC running Win7. I have previously been able to print with this combo with no problems at all. I have removed the device, uninstalled the Lexmark software, rebooted,...


Please follow the steps on to properly Uninstall Lexmark Printers from your computer. After the uninstallation process is done, reboot pc when prompted.
When pc turns on, check if your Windows 7 is running on 32-bit or 64-bit. On your computer, go to Start menu > right-click on Computer > Properties. Take note of the System Type.
Use the link below to download and install the Lexmark X7350 Printer Driver on your computer. Note: Use the Vista Driver on Windows 7. - Lexmark X7350 Driver for Vista 32-bit - Lexmark X7350 Driver for Vista 64-bit
When the installation process is successful, try to print a document to verify that the problem is fixed.

Sep 11, 2011 | Lexmark X7350 All-In-One InkJet Printer

1 Answer

New laptop with windows 7 won't print to Lexmark x7350. says to enable bidirectional support - but that option is grayed out.


Make sure to use the correct printer driver version for your operating system. You may need to uninstall your existing printer driver first before downloading the new driver. Go to Start menu > Programs > Lexmark 7300 Series > Tools > Uninstall. After the uninstall process, reboot pc when prompted.
When your computer turns on, go to Start menu > right-click on Computer > Properties. Check the System Type. Note: Use Vista driver in Windows 7.
Use the links below to download and install the printer driver: - Lexmark X7350 Driver for Vista/Win7 32-bit - Lexmark X7350 Driver for Vista/Win7 64-bit
Follow the instructions on your computer screen.

Jun 24, 2011 | Lexmark X7350 All-In-One Printer

1 Answer

When I print I am only getting various wide lines and no words or content. What is wrong with my printer


Do you get the same result when making a copy using the Copy button on your printer? You can try to clean the cartridge nozzles. Refer to this article in the Lexmark website on How to Clean the Print Cartridge Nozzles with the Lexmark X7350.

Mar 28, 2011 | Lexmark X7350 All-In-One InkJet Printer

1 Answer

I can't get my Lexmark X7350 all-in-one printer to work on my windows 7 computer from dell. I get a message telling me to "Enable Bidirectional communication".


Its a driver issue, you need to contact lexmark and ask them if they have a driver that will work with windows 7 (theres alot of issues with scanner and printer drivers with 7) good luck

Nov 27, 2009 | Lexmark X7350 All-In-One Printer

1 Answer

Lexmark X7350 InkJet printer & Vista


http://downloads.lexmark.com/perl/downloads/downloads.cgi

Follow this link to Lexmark site, uninstall your old driver before installing this one to see if it corrects the problem

Aug 06, 2008 | Lexmark X7350 All-In-One InkJet Printer

1 Answer

Lexmark x7350 Still under warranty does not fax, scan or copy anymore


Definitely sounds like the scan bar or some related hardware is bad. I would call Lexmark tech support at 1-800-332-4120 and ask them if it is still under warranty and if it's covered by warranty. Hope you registered the product when you first bought it.

Jul 16, 2008 | Lexmark X7350 All-In-One InkJet Printer

Not finding what you are looking for?
Printers & Copiers Logo

Related Topics:

50 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lexmark Printers & Copiers Experts

Roopesh S
Roopesh S

Level 2 Expert

228 Answers

Sanath Kumar V

Level 3 Expert

684 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18297 Answers

Are you a Lexmark Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...