Question about Kitchen Ranges

Open Question

I need a gas valve 419069

I need a gas valve for a glow worm space saver 50

Posted by on

  • jon grainger Feb 10, 2012

    this is for a boiler

×

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 659 Answers

SOURCE: Glow worm 45 60 boiler

You have to have 12" clearance on all sides.

Posted on Apr 03, 2009

  • 767 Answers

SOURCE: The gas valve on my

Hello my name is Heath it will be my pleasure to assist you. Use a 3606c this is a universal type that will work for you.

Posted on Oct 09, 2010

  • 3 Answers

SOURCE: glow worm fuel saver mk

WHY PANASONIC INVERTER AC TIMER LIGHT ALWAYS FLASHING

Posted on Oct 22, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Glow worm fuel saver mk ll


WHY PANASONIC INVERTER AC TIMER LIGHT ALWAYS FLASHING

Oct 22, 2010 | Heating & Cooling

1 Answer

I bought a comfort glow vent-less space heater model # CJ18NL. It had a natural gas valve on it and the guy said I could put on a propane valve, which I did. It's not lighting. Is this model only good...


According to the Comfort Glow Website, this is a Natural Gas unit. If you use propane you will need
a minumum 100# LP Cylinder and a pressure regulator. I have a Comfort Glow unit and went through the same process.

If you have it hooked up to a 30lb cylinder without a regulator I would think that if you purged the gas line
of air you should be able to light the pilot.

On a new unit you can expect to push the spark ignitor button at least a dozen times while holding
down the gas valve button.

Good Luck

Feb 19, 2010 | Desa International GWP20T GLOWARM Wall...

1 Answer

Pilot won't light


You may have to bleed some more air out of the system.

Your ODS pilot may be clogged with dust or lint and needs to be blown out with air(less than 30 psi).

Your regulator or gas valve may be faulty.

Dec 09, 2009 | Desa International Comfort Glow Infrared...

1 Answer

I have a MD7600 maytag dryer. It runs but it will


when you turn it on give it a few minutes and see if you see a glow. that will be the ingnitor.if glowes low or dont see a glow at all then id say you have a bad ignitor. if you see a bright orange glow then id say your gas valve is bad. the ignitor is located next to the gas valve, usually their is a peep hole in the front of the dryer that you pop off (dime size cap) and you can look in hole and see if you see a glow. ignitor price roughly 20-50 dollars. vale can be pricey. 50-145.00 dollars part only. labor ingnitor 75-125 and for valve 85-165 depending on were you live and who you use. usually one or the other not both and seldom a thermostat could be bad.

Sep 17, 2009 | Maytag Dryers

1 Answer

Glow worm 45 60 boiler


You have to have 12" clearance on all sides.

Apr 02, 2009 | Water Heaters

Not finding what you are looking for?
Kitchen Ranges Logo

Related Topics:

51 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kitchen Ranges Experts

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

yadayada
yadayada

Level 3 Expert

74896 Answers

paulcarew

Level 3 Expert

2454 Answers

Are you a Kitchen Range Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...