Question about Eforcity Cell Phones

Open Question

Compatible silicone cover for BigBen Wii Balance Board

I have BigBen Balance Board and I can not find adequate silicone skin. The problem is that all skin I have found are designed for Nintendo Balance board which is little lower than Big Ben and it is little curved on all four sides. When I put such silicone cover it does not fit easily and pins on corners part do not go in the holes around weight buttons. Does anyone know where can I find fully compatible silicone skin for my BigBen Wii Balance Board. Thanks in advance.

Posted by on

Ad

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 26 Answers

SOURCE: wii fit balance board

This is really very frustrating when you face such kind of problems. You may check out Wii Fix Guideto fix the problem yourself. This DIY guide will show you step by steppictures to fix the problems. yourself without any technical knowledge.

Posted on Feb 21, 2009

Ad
  • 80 Answers

SOURCE: wii balance board weight differently after put on a wii board sk

Sometimes the silicone skin can have an effect on the Wii Fit Balance Board if it gets pinched. Make sure that it is not interfering with the the total movement of the top portion of the Wii Fit balance board and the space between the top and the middle of the unit. If there is any obstruction, refit the skin on the balance board.

Posted on Feb 27, 2009

  • 1 Answer

SOURCE: Jillian Michaels won't allow Wii Balance Board for weigh in

Actually, I had the same problem and discovered that you have to have the wii remote in your hand and that you must push the A button once you're on the board. Otherwise it just keeps telling you that you're moving too much.

Posted on Jun 01, 2009

  • 1 Answer

SOURCE: The big ben balance board

Did you find a sync button under the battery cover? I mistook the big button for sync button. But the sync button is a small button under battary cover. Also the board should be not further than 1 meter from you Wii.

Posted on Mar 26, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to configure gameon balance board with wii console


Hello,

1. You need to put Balance Board compatible game disk in the console.
2. Select Disk Chanell and press Start
3. Remove SD Card slot cover on the console and the battery cover on the Balance Board
4. Press and hold for 2-5 sec the SYNC button on the Balance board. You will see a blinking light.
5. Press the Sync button on the Wii console and after a while you will get non-blinking light.

This will mean that your device is synchronized and you are able to use your Balance Board.

Good Luck!
Don't forget to close back the covers you've removed earlier.

May 23, 2012 | Nintendo Wii Fit - Balance Board + Game...

1 Answer

How to connect wii fit board to the wii


Important Note!
Do Not use "One-Time Mode" sync.
Syncing can be completed only if a compatible game disc is running in the console.The Wii Balance Board may need to be synced to each compatible game individually.Some games may require you to go into a specific screen to sync the Wii Balance Board.These sync settings will be saved even after the console is turned off.

1. Insert a Wii Balance Board compatible game disc in the Wii console.
2. Use the Wii Remote to select the Disc Channel from the Wii Menu, then select "Start" to begin the game.3. Open the SD Card slot cover on the front of the Wii console.4. Remove the Battery Cover on the bottom of the Wii Balance Board.
5. Press and release the SYNC button on the Wii Balance Board. The Power LED on the board will start blinking.
6. Press and release the SYNC button on the console while the Power LED on the board is still blinking.
7. The Power LED will stop blinking and light steadily once the synchronization is complete.8. Replace the battery cover and return the board to the normal operating position.

Nov 16, 2011 | Nintendo Wii Fit for Wii

1 Answer

How can i re connect the wii fit balance board to my wii ?


Synching can be completed only if a compatible game disc is running in the console. Compatible game discs (such as Wii Fit) will display the Wii Balance Board icon on their packaging.
The Wii Balance Board must be synced to each compatible game individually.
These sync settings will be saved even after the console is turned off.

Follow these directions to sync the Wii Balance Board (so that it is recognized by the Wii console):

Insert a Wii Balance Board compatible game disc (such as Wii Fit) in the Wii console.


Use the Wii Remote to select the Disc Channel from the Wii Menu, then select "Start" to begin the game.

Open the SD Card slot cover on the front of the Wii console.

Remove the Battery Cover on the bottom of the Wii Balance Board.

Press and release the SYNC button on the Wii Balance Board. The Power LED on the board will start blinking.

Press and release the SYNC button on the console while the Power LED on the board is still blinking.

The Power LED will stop blinking and light steadily once the synchronization is complete.

Mar 16, 2011 | Nintendo Wii Console

2 Answers

How do you sync the wii fit board and wii console


  • Put four AA batteries into the battery housing located on the underside of the Wii Balance Board.

  • Insert a Wii Balance Board compatible game into the Wii system.

  • Select the "Disc Channel" on the screen with the Wii remote, and choose "Start."

  • Open the SD card slot to reveal a sync button on the Wii system. This is located behind a cover under the power and eject buttons.

  • Turn the Wii Balance Board upside down.

  • Remove the battery cover under the balance board to reveal another sync button.

  • Pres the sync button on the balance board, then press the sync button on the Wii. Do not hold down the buttons. You know it is synchronized when the blue light on the Wii Balance Board stays steady

  • Place the board on a flat surface directly in front of the TV. Face the power button away from the TV.

  • Mar 03, 2011 | Nintendo Wii Console

    1 Answer

    When sychronizing the wii balance board we held the sychronize button down to long and now the wii remote control won't work how do we fix this


    1. Insert a Wii Balance Board compatible game disc in the Wii console.

    2. Use the Wii Remote to select the Disc Channel from the Wii Menu, then select "Start" to begin the game. Press the A Button to bypass the wrist strap screen.

    3. Open the small SD Card slot cover on the front of the Wii console.

    4. Remove the Battery Cover on the bottom of the Wii Balance Board.

    5. Press and release the SYNC button on the Wii Balance Board. The blue light on the board will start blinking.

    6. Press and release the red SYNC button on the Wii console while the blue light on the board is still blinking.

    7. The blue light will stop blinking and stay on steady once the synchronization is complete


    Click here to download repair guide

    Jan 05, 2011 | Nintendo Wii Console

    1 Answer

    I can not re start my nintendo balance board,


    1. Insert a Wii Balance Board compatible game disc in the Wii console.

    2. Use the Wii Remote to select the Disc Channel from the Wii Menu, then select "Start" to begin the game. Press the A Button to bypass the wrist strap screen.

    3. Open the small SD Card slot cover on the front of the Wii console.

    4. Remove the Battery Cover on the bottom of the Wii Balance Board.

    5. Press and release the SYNC button on the Wii Balance Board. The blue light on the board will start blinking.

    6. Press and release the red SYNC button on the Wii console while the blue light on the board is still blinking.

    7. The blue light will stop blinking and stay on steady once the syncronization is complete

    Dec 20, 2010 | Nintendo Wii Fit - Balance Board + Game...

    1 Answer

    I have a wii balance board, the batteries ran out so i changed them -now the board will not work. Ive tried pressing the red buttons together but still no joy. my neighbour is having the same issuses. Why...


      Try these steps!

    1. Insert a Wii Balance Board compatible game disc in the Wii console.


    2. Use the Wii Remote to select the Disc Channel from the Wii Menu, then select "Start" to begin the game. Press the A Button to bypass the wrist strap screen.


    3. Open the small SD Card slot cover on the front of the Wii console.


    4. Remove the Battery Cover on the bottom of the Wii Balance Board.


    5. Press and release the SYNC button on the Wii Balance Board. The blue light on the board will start blinking.


    6. Press and release the red SYNC button on the Wii console while the blue light on the board is still blinking.


    7. The blue light will stop blinking and stay on steady once the syncronization is complete
    click here to download repair guide if u need

    Dec 17, 2010 | Nintendo Wii Fit - Balance Board + Game...

    1 Answer

    MY WII BALANCE BOARD IS CHARGED BUT THE BLUE LIGHT WONT STAY ON.


    1. Insert a Wii Balance Board compatible game disc in the Wii console.


    2. Use the Wii Remote to select the Disc Channel from the Wii Menu, then select "Start" to begin the game. Press the A Button to bypass the wrist strap screen.


    3. Open the small SD Card slot cover on the front of the Wii console.


    4. Remove the Battery Cover on the bottom of the Wii Balance Board.


    5. Press and release the SYNC button on the Wii Balance Board. The blue light on the board will start blinking.


    6. Press and release the red SYNC button on the Wii console while the blue light on the board is still blinking.


    7. The blue light will stop blinking and stay on steady once the syncronization is complete.

    click here to download repair guide if u want

    Dec 15, 2010 | Nintendo Wii Fit - Balance Board + Game...

    1 Answer

    Wii balance board weight differently after put on a wii board sk


    Sometimes the silicone skin can have an effect on the Wii Fit Balance Board if it gets pinched. Make sure that it is not interfering with the the total movement of the top portion of the Wii Fit balance board and the space between the top and the middle of the unit. If there is any obstruction, refit the skin on the balance board.

    Feb 26, 2009 | Nintendo Wii Fit for Wii

    1 Answer

    Wii fit


    are you able to get any of your controllers to connect? if not it could be a issue with your sensor bar. please provide a bit more info

    but try this first

    Synchronizing the Wii Balance Board with your Wii Console
    IMPORTANT: To operate correctly, the Wii Balance Board must be synchronized with the Wii console using Standard Mode Synchronization. Follow the steps below to synchronize the board to the console.
    • This procedure must be followed for each Wii Balance Board compatible Game Disc.
    • These synchronization settings will be saved even if the console is turned off.
    • This procedure can be completed only if a compatible Game Disc is running in the console.
    1. Press the EJECT Button on the front of the Wii console and remove any
      game disc if necessary. Insert a Wii Balance Board compatible Game Disc.
    2. Use the Wii Remote to select the Disc Channel on the Wii Menu screen and select START.
    3. Open the SD Card slot cover on the front of the Wii console.
      NOTE: Close the SD Card slot cover when you are finished with the synchronization procedure.
    4. Remove the Battery Cover on the bottom of the Wii Balance Board.
      NOTE: Replace the Battery Cover when you are finished with the aynchronization procedure.
    5. Press the SYNCHRO Button (SYNC.) on the Wii Balance Board. The Power LED on the board will start blinking (for up to about 20 seconds).
    Press the SYNCHRO Button (SYNC.) on the console while the Power LED on the board is blinking.
    1. IMPORTANT: Do not press and hold the SYNCHRO Button on the Wii console down for more than 10 seconds. This will delete all of the Standard Mode synchronization information for all Wii Remotes that you use with that console.
    2. The Power LED will stop blinking and light steadily once the synchronization is
      complete. You are now ready to play the Wii Balance Board compatible Game Disc. Please refer to the instruction booklet for the Game Disc you are using for further information on gameplay.
    • Only one Wii Balance Board can be synchronized to a Wii console at a time. Up to a total of 10 Wii Remotes and accessories can be synchronized to a console at any time with the Standard Mode procedure. If additional synchronizations are made, the oldest existing ones will be overwritten.
    • The Wii Balance Board can only be synchronized to one console at a time using the Standard Mode procedure. If you change the console you are using the board with, you will have to repeat the synchronization procedure each time.
    • The Wii Balance Board uses the Player 4 (P4) connection. If a Wii Remote is actively using P4, that remote will be disconnected while the board is being used.

    Aug 01, 2008 | Nintendo Wii Console

    Not finding what you are looking for?
    Cell Phones Logo

    Related Topics:

    100 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Eforcity Cell Phones Experts

    Computer Repairing
    Computer Repairing

    Level 3 Expert

    14641 Answers

    Les Dickinson
    Les Dickinson

    Level 3 Expert

    18409 Answers

    kakima

    Level 3 Expert

    102366 Answers

    Are you an Eforcity Cell Phone Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...