Question about Brother HL5350DN Laser Printer
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: Brother printer HL 5250 DN.
Brother Drum Reset Instructions
The Drum LED continues to blink if the drum counter was not reset when you replaced the drum. To reset the drum follow the instructions below:
Press the cover release button and then open the front cover of the printer.
Press and hold down Go button until all 4 LEDs are lit. Once all 4 LEDs are lit, release the Go button.
Close the front cover.
Make sure that the Drum LED is now off.
Reset the drum counter only when you replaced the drum unit with a new one.
Posted on Dec 08, 2008
Reset the drum counter as follows:
The Drum counter is now reset.
Posted on Mar 23, 2009
I have 'reused' the same drum three times and still prints like a charm.
Open the toner door and pull out the toner/drum assembly. Take the toner off the drum tray. Use a alcohol pad or lint free cloth and wipe the mauve coloured drum to remove the excess lint and toner collected on the drum. Rotate the drum with the white gear and keep cleaning until the whole drum is done.
Put the toner back in the drum tray. Clean the corona wire by sliding the blue tab back and forth 3 or 4 times. Put the toner/drum back into the printer and close the door.
After the printer does the self test the drum light will cone on again so then you need to reset the counters.
Open the door again
Hold the GO button until all 4 lights are lit up
Release the GO button
Close the door
Printer will self test and should extinguish all the trouble lights.
Posted on Apr 20, 2009
This drove me crazy recently...
The Reset Parts Life option is not available unless the "Drum End Soon" message is on the display. If you replace the drum before this message appears, you'll have to wait to reset the count.
Posted on Sep 21, 2009
Tips for a great answer:
Mar 26, 2014 | Brother HL-6050DN Laser Printer
Oct 26, 2011 | Brother HL 5250DN Laser Printer
Nov 10, 2010 | Brother HL-6050DN Laser Printer
May 21, 2009 | Brother HL-5270DN Laser Printer
May 15, 2009 | Brother HL 5250DN Laser Printer
Mar 23, 2009 | Brother HL 1250 Laser Printer
Feb 26, 2009 | Brother HL 5250DN Laser Printer
Dec 05, 2008 | Brother HL-2070N Laser Printer
Sep 13, 2008 | Brother HL-2040 Laser Printer
10,811 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: