Question about Home Security
I'm wanting to know if the Stanley Garage Door Opener model 3220 50 has a DIP switch. If so, where is it? I want to use a Chamberlain universal keypad if possible. Thanks.
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
I had the same frustrating dilemma with my Craftsman LiftMaster garage door and Keypad, Model 139.53754-01 (dated 10/06; and has the # 315 MHz).
To resolve “the dilemma”, grab your keypad, climb up on a ladder to access the garage door opener’s motor unit. On the right side of the motor unit, remove the white plastic casing by pressing buttons on each side and pulling down. This will expose the programming area, and for our purposes, the “Learn” button.
1. On the motor unit, press and release the “Learn” button. The Learn indicator light will glow steadily for 30 seconds.
2. Within 30 seconds, enter a four digit personal identification number (PIN) of your choice on the keypad. Then press and hold the ENTER button.
3. Release the ENTER button when the motor unit lights blink. The code has been “learned”/stored/activated.
Good Luck, and I Hope this Helps!
For possible future reference:
How to change an existing, known PIN
(Changing an existing PIN can be done with the wireless remote keypad, and does not require access of the motor unit.)
From the keypad:
1. Enter the four digits of the present PIN, then press and hold the # button. The opener light will blink twice. Release the # button.
2. Enter your new 4-digit PIN and press Enter. The motor unit lights will blink once when the PIN has been “learned”/stored/activated. Test by entering the new PIN, and pressing Enter.
Posted on Jun 24, 2008
If your opener doesn't have safety sensors in the doorway this keypad will not work with it.
Posted on May 20, 2010
You cannot bypass the sensors but you can try reversing their position so that the sun isn't hitting the receiving unit. You can also move them back from the door or use something like the tube inside a roll of toilet tissue to shade the lens.
Posted on May 20, 2010
SOURCE: hello, i have a stanley
If you go to this website you will find near the bottom a link you can click on to view an instruction video that shows all.
Posted on Sep 15, 2010
Tips for a great answer:
Apr 11, 2017 | Building Materials
Oct 15, 2014 | Building Materials
Jun 29, 2012 | Sears Craftsman LiftMaster Chamberlain...
Jun 05, 2011 | Locks & Locksmithing
Dec 20, 2010 | Locks & Locksmithing
Sep 04, 2009 | Sears Craftsman LiftMaster Chamberlain...
Mar 29, 2009 | Sears Craftsman LiftMaster Chamberlain...
Nov 26, 2008 | Sears Craftsman LiftMaster Chamberlain...
Oct 15, 2017 | Home Security
528 people viewed this question
Usually answered in minutes!