Question about Sewing Machines
Can't figure out how to loosen a newly installed drive belt. Tension is currently too tight.
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Lay machine back (away from you) outside the box. On the underneath of the machine itself is a metal plate facing you with the number. The plate will be in the center and is easy to read.
Posted on Oct 11, 2009
I went online and found a diagram that showed where the screw was to loosen or tighten the drop in bobbin thread (it faces the front) but it couldn't be seen until I slid the sliding door totally off. I had to use a flashlight and very small screwdriver and was able to loosen the screw a tiny bit and it solved my problem. I've been sewing for over 40 years and didn't know how to adjust the tension on a drop in bobbin until now. You learn something new everyday!
Posted on Dec 21, 2009
The balance stitch control on this model is below the stitch patterns; to the far right.
If you need a manual you can download a free one at the Singer Company website.
Posted on Mar 13, 2010
The large knob in the center of the stitch length dial is a button, push it in to reverse stitch. Hold in as long as you need to reverse stitch, then release to resume regular stitching.
Posted on Jul 30, 2010
Tips for a great answer:
May 23, 2017 | Singer Sewing Machines
Dec 18, 2012 | Sewing Machines
Feb 12, 2012 | Sewing Machines
Aug 07, 2011 | Sewing Machines
Jul 17, 2011 | Singer Sewing Machines
Jan 09, 2010 | Singer Sewing Machines
Sep 24, 2009 | Singer Sewing Machines
80 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: