Question about HP LaserJet 4700 Printer

1 Answer

HP 4700 printer started out with intermittent 49.3048. Tried to replace formater bd and got 49.00ff error with new board. Put old bd back in, ptr booted ok and worked. Tried to do firm ware updat, and all worked just fine, printer rebooted, and stoped with a 49.00ff error. Replaced DC Controller and formatter bd, still came up to 49.00ff. 3 formatters and 1 dc controller, still same problem. HELP

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 3 Answers

Try this
Remove all EIO devices and memory Dimm's execpt the firmware dimm.
Start the printer. If the error is gone then place the dimm's / EIO devices one by one.
(Don't forget to switch off the printer.)
If the error is still there then you might have a faulty firmware dimm.

Posted on Dec 29, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Error code 59.90 on color laserjet 470


59.9 is SCANNER MOTOR ERROR.
It is a rather tough part to service.
The entire scanning assembly would have to be replaced.
see
HP Color LaserJet 4700 Series Printer Numerical Control Panel Error...

Nov 01, 2016 | HP LaserJet 4700 Printer

1 Answer

I have a HP LJ 4700 printer set up to a network. It will print black but not colour


1. Go to menu set as default.
2. Do color calibration.
3. Print PQ test pages, observe the colors, chk
4. Print demo page. chk
5. Print from different file/system..

Nov 28, 2012 | HP LaserJet 4700 Printer

3 Answers

ERRCODE 00064-0000


Did you try to think about replacing DC Controller (FG3-1998-020) i

Jun 30, 2012 | Canon 2 Ir3300 Ir3300i B/w Copier/ Network...

1 Answer

I REPLACE THE BOARD BUT 49.00 FF SERVICE ERROR WHEN INITIALING ..... HP 4700


Whatever board you replaced is probably DOA.
What board did you change and why?

Jan 11, 2011 | HP LaserJet 4700 Printer

2 Answers

How to replace image fuser kit for hp laserjet 4700n


turn off the machine. open upper front cover. remove the old fuser and insert the new one. turn on the machine and enjoy your printer with new fuser kit.

Jan 20, 2010 | HP LaserJet 4700 Printer

1 Answer

HP Laserjet Printer 4700 Fuser Error


Try unplugging the printer for 30 mins. You may still have a defective fuser.

Mar 12, 2009 | HP LaserJet 4700 Printer

2 Answers

HP printer 4700


The printer's memory probably catastrophically failed if it never makes it past power-on. Or the logic board is toast. So maybe call HP technical support and present them with the idea that the memory or main system board is dead. They will probably refer you to someone who will gladly take your money.

Another option, if the printer is still under warranty you could ship it back to HP and have them fix/replace it.

Sep 19, 2008 | HP LaserJet 4700 Printer

1 Answer

Hi!


SC458 PTR pressure
mechanism H.P.
detection error
• When the PTR pressure
mechanism does not
stop its H.P. after 15
seconds from the PTR
lift motor starts to return
to its H.P.
• H.P. detection sensor
does not on within 7
seconds after the PTR
pressure movement
starts.
• H.P. detection sensor
does not off within 7
seconds after the PTR
pressure release starts.
• Defective PTR lift motor
• Defective H.P. sensor
• Dirty H.P. sensor
• Defective H.P. sensor
feeler
• Defective main control
board
1. Make sure that sensor harness is properly
connected.
2. Clean the sensor, replace it if necessary.
3. If the sensor feeler is broken, replace it.
4. Replace the PTR lift motor.
5. Replace main control board.

Hope this is what your looking for
Thanks J

Jan 05, 2008 | Office Equipment & Supplies

Not finding what you are looking for?
HP LaserJet 4700 Printer Logo

843 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Office Equipment & Supplies Experts

Vinaya Kumar...
Vinaya Kumar...

Level 3 Expert

1121 Answers

Seeker5211
Seeker5211

Level 3 Expert

1088 Answers

kakima

Level 3 Expert

98879 Answers

Are you a HP Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...