Question about Foxconn (755A01-6ELRS) (K8S755A6ELRS) Motherboard

1 Answer

I need manual for Foxconn motherboard

I seem to have no clear description of the board model other than 'Foxconn' and the serial 600A01 - 6LRS next to the processor. Seems to have a Via chipset. Has 5 PCI slots and a AGP slot. No onboard graphics. 3 RAM memory slots.
I'm seeking a manual for this board so would appreciate a hint as to what model it is. Thanks.

Posted by on

  • fernandez1 Oct 27, 2008

    Si-Sandra classifies the mobo as KT600-8237,


    System Via Technologies Inc. KT600-8237

    I cannot locate it on the Foxconn site.

    Thanks for your help.

  • Canaan Hoffman
    Canaan Hoffman May 11, 2010

    Do you have the model name of the mobo?

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 35 Answers

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

Characteristics of n15235 manual motherboard


- Intel® Pentium D, Pentium® 4, Celeron D processors, Socket T (LGA775)
- 533/800MHz front side bus (FSB)
- Single channel DDRII 533 / 400 x2 DIMMs
- 1 x AGP 8x, 3 x PCI
- ATA x 2 + Serial ATA x 2 w/ RAID
- 5.1 channel Audio, AC'97 interface (Realtek)
- 10/100M LAN (Realtek)
- 8 USB 2.0 ports

Also, if you need drivers for all that components, use this tool: http://tinyurl.com/n8nrz6t.
regards

Sep 16, 2011 | Foxconn 6627MA-RS2H Motherboard

1 Answer

For the rebate It askes for the board serial number... I'm not sure which of the numbers on the board is the serial number and I have already installed the board...


Try this link below, you should be able to find the Motherboard Serial number around that area. If your still not clear Email the company and ask them for clear description of the location.

http://www.ecs.com.tw/extra/productinfo/MB.htm

Aug 31, 2010 | EliteGroup ECS MCP61MM3 (V10) AM3 NVIDIA...

1 Answer

No 1394 port located on MoBo as manual indicates. Is it mislabeled?


Return the motherboard to the place where you bought it, and have them explain the differences that you have observed.

May 30, 2009 | Foxconn 661FXME Motherboard

1 Answer

Foxconn P9657AB motherboard installation problem


You're Foxconn board uses the Award bios.
The long beeps you are hearing are telling you there is a problem with you're memory.
You're pic does not look like the Foxconn P9657AB-8EKRS2H MB as shown in the user manual. Found on This link.
http://www.foxconnchannel.com/product/Motherboards/detail_overview.aspx?ID=en-us0000297
The pic on Foxconn's site does but not the manual listed.
The motherboard uses four 240-pin slots with 1.8V for DDR2 memory only.
(Question? Did you're ECS MB use DDR2 memory)?
If you have more than 1 DIMM installed remove all but 1.
Move the DIMM into the closest slot next to the CPU.
Boot the PC & check for beeps. If still presant move the DIMM to the next slot & try again. Continue this through all four slots. Than try another DIMM. If the mother board continues to beep as mentioned than call Foxconn. (There is a bios update mentioned below for memory).
The CPU may come into question. (It’s revision). You may have to call Foxconn for this information. (580-272-0035). They do not place this information in their user manual. Most users have to call. The rev of the CPU may conflick with the memory causing you to receive the bios beeps. (I have had to return 2 boards for this reason). I picked an Asus board over Foxconn.
I have come across this with Foxconn motherboards these past two years. Suggest you update you’re bios. Foxconn has a revision dated, 3-28-2008 for memory before you call. After bios update test the memory again for beeps. Still there? Return the board is my suggestion.
It’s a guess that the red led will go away after the memory issue has been addressed. Normally there is a green led on most motherboards. This means standby. The board has power connected. I could not find any reference in the user manual * .pdf, for R450.

Good Luck ninjo61!
Mike

Jun 20, 2008 | Foxconn P9657AA-8KS2H Motherboard

1 Answer

Motherboard


Are you looking for this. (click the link). Foxconn.
http://www.foxconnchannel.com/product/Motherboards/detail_overview.aspx?ID=en-us0000189

Manual for MS-7091
http://217.110.237.67/Manuals/Medion%208383XL%20mit%20MS-7091.pdf

If I can be of more service, just post back & let me know how thing go.
Good Luck!

Mike

Apr 25, 2008 | Foxconn P4M800P7MA-RS2 Motherboard

16 Answers

Foxconn manual for a n15235


There is no Foxconn mainboard (and will never be...) called N15235 although this is printed on the board. The right name is P4M800P7MB-RS2H and you can find all stuff here: LINK

P.S.: you can find the right model number printed on the board beside the RAM slot near the CPU and on small label above.
--
Tom (mailanmeyer@gmail.com)

Feb 18, 2008 | Motherboards

6 Answers

Motherboard manual


none of those numbers correspond with the Foxconn site, take alook to see if any of these are similair to yours http://www.foxconnchannel.com/EN-US/service/downloads.aspx

May 18, 2007 | Foxconn 661FXME Motherboard

Not finding what you are looking for?
Foxconn (755A01-6ELRS) (K8S755A6ELRS) Motherboard Logo

Related Topics:

5,108 people viewed this question

Ask a Question

Usually answered in minutes!

Top Foxconn Motherboards Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Mark Taylor
Mark Taylor

Level 3 Expert

728 Answers

Gareth Cockram
Gareth Cockram

Level 3 Expert

657 Answers

Are you a Foxconn Motherboard Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...