Question about Sewing Machines
Posted by Anonymous on
After pulling the bottom cover off,I found the cam was sliding back slow,so
removed the circlip holding the spring.and arm,wd 40 on the arm and now
works better than ever in forward and reverse
Posted on Jul 27, 2012
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: Janome Excel 5124 reverse lever
If you pull the bottom off the machine (half a dozen screws) there is a cam on the main drive shaft. The cam is probably jammed in the reverse position due to lack of lubrication on the shaft. You can move the cam back manually and it will operate in forward direction. It appears that the shaft needs lubrication.
Posted on May 02, 2009
Tips for a great answer:
Aug 07, 2016 | Janome Sewing Machines
Dec 17, 2015 | Janome Sewing Machines
Aug 26, 2015 | Janome D'cor Excel Pro 5124 Mechanical...
Jul 16, 2014 | Janome Sewing Machines
Jul 01, 2014 | Janome MyExcel 3123
Jan 15, 2014 | Janome D'cor Excel Pro 5124 Mechanical...
Apr 02, 2010 | Janome MyExcel 3123
Feb 27, 2009 | Janome D'cor Excel Pro 5124 Mechanical...
168 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: