Question about Panasonic TC-32LX60 32 in. LCD Television

2 Answers

Panasonic 32 inch LCD TV will not turn on-red light flashing

I have had my Panasonic 32inch LCD TV about 18months. It will not turn on with the remote or the power button on the TV. I have unplugged it from the wall and plugged it in again but no change. The red led light on the lower left hand corner of the set is flashing intermittently.

Posted by on

  • 3 more comments 
  • NoSoundinHI Nov 28, 2008

    I have a 42" plasma with the same problem! The panel buttons do not work, the volume is stuck on one level and the remote doesn't work. The LED light flashes 20 times when tv is turned off.

  • kerryshaffer Jan 11, 2009

    tv worked just fine turnned off next mornning tried to turn on tv but no power even manualy or with remote

  • gogogecko Mar 27, 2009

    My 32 lcd Panasonic is 15 months old. it has just started not coming on when you push in the "on" button. i have to re- push the button and hope that it starts.when it doesnt come on, there is a little red light at the bottom of the screen which flashes. it not a big worry at present as it only happens occasionally, but its only 15 months old ! luckly i have a 5 year warranty on it, but knowing my luck it will be not covered !!!

  • bmwgolfguy May 02, 2009

    I believe I have the same problem. The tv is about 3 years old. When you try to turn it on, you get sound from whatever the last station that was on for a second or two, but no picture. Then no sound, the TV clicks twice like it is trying to turn on again, then nothing. The red led light on the bottom left hand corner on the front of tht tv just blinks continuously. To get the tv to work, you have to unplug it for a few seconds and that seems to re-set it. This problem started about 2 months ago and was intermittent. Now it happens about every third time I try to turn the tv on.

  • Anonymous Mar 25, 2014

    Does not turn on. Red LED flashes and then stop. Nothing will happen again until power cord is unplugged. LAst week unplugging the cord reset the TX and then allowed the TV to turn on.

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 31 Answers

Sounds like a hardware failure, let me know which model # it is and i will run through service manual.

Posted on Oct 26, 2008

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 29 Answers

Possible DRY Joints on the power board. Needs either an engineer or someone who knows how to check it.

Posted on Dec 12, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

HAd been working fine turned it off came back later turned it on e light comes on blinks 14 times. unplugged it hoping for a reset. no.


14 blinks TC-P50ST30 - Badcaps Forums - Badcaps.net

www.badcaps.net > ... > Troubleshooting TVs and Video Sources

Aug 2, 2013 - 20 posts - ‎3 authors
14 blinks TC-P50ST30 Troubleshooting TVs and Video Sources. ... power button down for 5 seconds then red power light flashes 14 times. 55 inch Plasma Viera (VIERA TC-P55GT30) not turning ...
20 posts
Jul 26, 2013
Sony KDL - 52W4100 powers off after turn on, gives 14 ...
20 posts
Jun 30, 2013
Panasonic plasma TC-P42S30. What is killing my SN ...
20 posts
Nov 9, 2012
More results from www.badcaps.net

LG 42 inch flat screen on light blinks 14 times & will not

www.justanswer.com > TV
Question - LG 42 inch flat screen on light blinks 14 times & will not - 5L. Find the answer to this and other TV questions on JustAnswer. ... First push the menu button with the sets remote and if nothing comes up then. Friend this is a very ...

Easy Common Fix for Sony TVs KDL- Red light blinking ...

? 6:32
https://www.youtube.com/watch?v=lkZWrWWvnZU
Dec 14, 2013 - Uploaded by Tampatec
Easy Common Fix for Sony TVs KDL- Red light blinking. Tampatec .... Shuts off and the red led flashes 14 times... I just want to know for sure if ...

How to fix Sony TV red blinking light on off shutdown




Dec 31, 2015 | Televison & Video

1 Answer

Hi I have a Panasonic VIERA TX-32LZD80 32 in. LCD TV TV which will not turn on. The standby light will flash continuously, but will stay on red if I press on the on button using the remote. My TV is...


BECAUSE THE QUESTION WAS ASKED BACK IN December 8, 2010, it is more likely that he has moved on. Anytime you have a product UNDER WARRANTY, USE IT OR LOSE IT. THINGS HAPPEN. DEVICES FAIL.

Dec 08, 2010 | Panasonic VIERA TX-32LZD80 32 in. LCD TV...

1 Answer

TV won't turn on with remote (new batteries)


Sounds like a power supply problem. The blinking light is never a good sign. Is it still under warranty?

Jan 06, 2010 | Panasonic Viera TX-32LX70 32 in. LCD TV

1 Answer

Wont turn on


The power supply board has been defected. Replace it with a new one.

Aug 15, 2009 | Samsung LN32A330 32 in. LCD TV

6 Answers

Panasonic 32 inch LCD TV will not turn on-red light flashing


The number of flashes is an error code. Count the number of flash. It looks like one of the boards in your set is failing intermittently. Panasonic codes for a guide as a starting point. Exact board STILL has to be verified;
One Blink: One blink of the power LED indicates a problem in the inverter circuit located on the LCD panel. The inverter board is not to be repaired in the field. Therefore a replacement is required.
Three Blinks: Three blinks of the power LED indicates an over-current or over-voltage condition in one of the DC supplies of the AP board. The AP board is repairable. Therefore the use of an ohmmeter and peak-hold-voltmeter is required to determine the cause of the shutdown. An over-voltage condition is definitely a defect of the AP board. An over-current condition may be due to a short circuit located in the AP board, A board, or the LCD panel.
Five, Seven, or Eight Blinks: The A board is responsible for five, seven or eight blinks of the power LED. The MAIN +3.3V, MAIN +5V, and MAIN +9V sources are all produced on the A board. The detection input pins of the MPU, IC1100, monitor for their presence.
Four or Six Blinks: The AP board is responsible for four or six blinks of the power LED. The DTV9V, and SUB_5V sources are produced on the AP board. The MPU IC1100 monitors for their presence when the unit is connected to AC Power. A short or open circuit on the A board may also be responsible for their absence.
Nine Blinks: Nine blinks of the power LED is due a short circuit in the audio output circuit (s) of the unit. The audio output circuit is located on the A board. Confirm the status of the speakers. If defective, perform a replacement. If ok, replace the A board.
Ten Blinks: Ten blinks of the power LED indicates a malfunction of IC4200, the frame converter. This IC resides on the A board. Therefore ten blinks of the power LED requires the replacement of the A board.

Jan 24, 2009 | Panasonic TC-32LX70 Television

1 Answer

Panasonic 32 inch LCD TV will not turn on-red light flashing


its not hard to replace the bulb and you can go to any tv shop and have them order it.youll need to give them the make and model number off the back of the tv so they know what to order

Nov 03, 2008 | Televison & Video

2 Answers

Sony tv wont start up???


The flashing should be a repeated number of blinks. Please post that count as that will indicate the circuit in which the set detected a problem. The set is in protective shutdown. Using hte blink count, we can determine the possible problem and solutions.

Dan

Jun 18, 2008 | Sony FD Trinitron WEGA KV-32FS100 32" TV

Not finding what you are looking for?
Panasonic TC-32LX60 32 in. LCD Television Logo

983 people viewed this question

Ask a Question

Usually answered in minutes!

Top Panasonic Televison & Video Experts

 Grubhead
Grubhead

Level 3 Expert

4767 Answers

The Knight
The Knight

Level 3 Expert

71754 Answers

Jaime Hernandez

Level 3 Expert

2294 Answers

Are you a Panasonic Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...